Jump to content

Search the Community

Showing results for tags 'Model T'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Calendars

  • Community Calendar
  • Group Builds
  • Model Show Calendar

Forums

  • Forum Functionality & Forum Software Help and Support
    • FAQs
    • Help & Support for Forum Issues
    • New Members
  • Aircraft Modelling
    • Military Aircraft Modelling Discussion by Era
    • Civil Aircraft Modelling Discussion by Era
    • Work in Progress - Aircraft
    • Ready for Inspection - Aircraft
    • Aircraft Related Subjects
  • AFV Modelling (armour, military vehicles & artillery)
    • Armour Discussion by Era
    • Work in Progress - Armour
    • Ready for Inspection - Armour
    • Armour Related Subjects
    • large Scale AFVs (1:16 and above)
  • Maritime Modelling (Ships and subs)
    • Maritime Discussion by era
    • Work in Progress - Maritime
    • Ready for Inspection - Maritime
  • Vehicle Modelling (non-military)
    • Vehicle Discussion
    • Work In Progress - Vehicles
    • Ready For Inspection - Vehicles
  • Science Fiction & RealSpace
    • Science Fiction Discussion
    • RealSpace Discussion
    • Work In Progress - SF & RealSpace
    • Ready for Inspection - SF & RealSpace
  • Figure Modeling
    • Figure Discussion
    • Figure Work In Progress
    • Figure Ready for Inspection
  • Dioramas, Vignettes & Scenery
    • Diorama Chat
    • Work In Progress - Dioramas
    • Ready For Inspection - Dioramas
  • Reviews, News & Walkarounds
    • Reviews
    • Current News
    • Build Articles
    • Tips & Tricks
    • Walkarounds
  • Modeling using 3D Printing
    • 3D Printing Basics
    • 3D Printing Chat
    • 3D Makerspace
  • Modelling
    • Group Builds
    • The Rumourmonger
    • Manufacturer News
    • Other Modelling Genres
    • Britmodeller Yearbooks
    • Tools & Tips
  • General Discussion
    • Chat
    • Shows
    • Photography
    • Members' Wishlists
  • Shops, manufacturers & vendors
    • Aerocraft Models
    • Air-craft.net
    • Amarket Modl
    • A.M.U.R. Reaver
    • Atlantic Models
    • Beacon Models
    • BlackMike Models
    • Bring-It!
    • Copper State Models
    • Freightdog Models
    • Hannants
    • fantasy Printshop
    • Fonthill Media
    • HMH Publications
    • Hobby Paint'n'Stuff
    • Hypersonic Models
    • Iliad Design
    • Hobby Colours & Accessories
    • KLP Publishing
    • Kingkit
    • L'Arsenal 2.0
    • Litaki Models
    • Maketar Paint Masks
    • Marmaduke Press Decals
    • MikroMir
    • Model Designs
    • Parkes682Decals
    • Paulus Victor Decals
    • Red Roo Models
    • RES/KIT
    • Sovereign Hobbies
    • Special Hobby
    • Test Valley Models
    • Tiger Hobbies
    • Ultimate Modelling Products
    • Videoaviation Italy
    • Wingleader Publications
  • Archive
    • 2007 Group Builds
    • 2008 Group Builds
    • 2009 Group Builds
    • 2010 Group Builds
    • 2011 Group Builds
    • 2012 Group Builds
    • 2013 Group Builds

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 16 results

  1. My first build, will be oob in the scheme with the shamrock. If anyone’s interested I appear to have bought two of these so the second one is now listed on eBay 😀 The engine assembly. Chasis next need to break out the tweezers for some of the parts….
  2. Model T 1917 LCP with Vickers MG (35607) 1:35 ICM via Hannants Formed in 1914, the Australian and New Zealand Army Corps (ANZAC) played a substantial part in WWI often in areas that are seldom given the prominence of the Western Front. They were a major player in Gallipoli where they were heavily mauled due to the Lions led by Donkeys approach that pervaded at the time. They also served in Palestine and Egypt, and it was the former where they used the then new Ford Model T to replace the previous vehicles that were suffering due to the poor availability of spares, They used six of them as Light Armoured Cars, often mounting weapons in a manner that became more familiar in WWII in the shape of the LRDG. The Kit The kit arrive in the usual ICM top-opening box with the captive flap on the lower tray and artwork depicting the contents on the lid. Whoever puts those lids together certainly makes them tight and difficult to get off even after cutting the tape between the two parts. This is the LCP Kit number 35663 with an added Vickers Machine Gun kit to mount in the back. Despite being small, this is a full-detail kit and includes a nicely detailed representation of the engine using 11 parts, a two-part radiator that is moulded into the front axle and attaches to the front of the body shell along with four lifting eyes inside the engine compartment. The completed engine is dropped in behind the rad and with the chassis upended the exhaust is put in place linked to the exhaust manifold on the side of the block. The rear axle of the Model T was suspended on a single lateral leaf-spring, and this is next to be constructed along with the differential and drive shaft assembly. This is also fitted to the underside with various swing-arms and the steering mechanism, then the four single-part wheels are installed and the model is righted once you've had a few moments to appreciate the detail of the wheels, which even have the valves moulded-in. The vehicle looks a bit odd with no upper body, so with the steering column fitted the crew compartment is made up from front, sides and back which have the doors moulded in and the base of the windscreen mount added as a separate part, a two part fuel tank is added behind the cab. The truck bed is made up of the bed, sides, front and rear sections in addition to the outer curved panels, bench seat and optional rolled up canvas cover attached to the right bed side. The two-part battery is fitted to the driving compartment bulkhead, along with the scuttle, doors and foot pedals. The gear stick and steering column are then fitted to the chassis as is the truck bed assembly. This assembly is then glued into position between the truck bed and engine compartment. Each of the two-part bonnet sections are fitted with grab handles, then fixed together, before being fitted to the engine bay. If you’re very careful, the modeller could cut the lower section of one side of the bonnet and fold it up along the hinge line to show off the engine. The semi open cab consists of the rear three-piece bulkhead, roof and two side sections, which leaves the upper door areas exposed. The windscreen is made up from upper and lower sections that can be folded or extended. The two headlights and single tail light are assembled and fitted, along with the spare tyre, a storage box and water container rack. The windscreen can be found on the clear sprue as you'd expect as can the rear light, the front ancillary light and both of the wing-mounted headlights. The screen is in two parts with a C-shaped frame attached to the two halves and a pivot to allow them to be folded or opened. Another pair of fuel cans are attached to the left running board and a spare tyre (no hub) is found on the right. Vickers MG At 1:35 it’s a small model in itself. You can build one complete assembly from the box, but there are two guns and two tripods, the former having options for the fluted and straight cooling jackets, while the latter are set up for seated or prone operation. Construction is simple, with the breech details and firing handle attached to your jacketed barrel of choice, followed by the two arms that hold the gun in place and their central arm with adjustment wheel at the bottom. A length of finely moulded ammunition slides through the breech, and the unused end is fixed to the ammo can with more moulded rounds in an insert that sits on top of the box. The weapon is inserted into the hole at the top of your choice of tripods, then the aforementioned ammo can and the water reservoir for the cooling jacket, which is linked by a hose to the underside of the muzzle, but isn’t mentioned at all in the instructions. Depending on how you will deploy your gun, you could use a length of lead wire or similar to portray this, gluing it to the can. If you’re unsure of the correct locations, there are a number of good resources online. Markings A very small decal sheet (not shown) contains only the vehicle numbers LC 913. Conclusion ICM have given us another version of their good looking WWI Model T car. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  3. Model T RNAS Armoured Car w/WWI British Tank Crew (35670) 1:35 ICM via Hannants Ltd WWI was the first war to feature mechanisation of infantry mobility with truck and tanks new to the battlefield. As the first truly mass-produced car, it was not long before the Model T was pressed into use, and eventually turned into an armoured car. In 1915, Commander Oliver Locker-Lampson was tasked with taking an expeditionary force to fight on the Eastern Front through Russia and Persia. After a huge gale wrecked the first batch of Lanchester cars, nine specially modified 'Model X Ford' Armoured Cars were developed by Chief Petty Officer L Gutteridge and shipped out to replace the damaged ones. At least half a dozen of them reached the squadron and were used as light recce cars in the summer of 1916 around the Caucuses and Romanian lines. The Kit The kit arrives in the usual ICM top-opening box with the captive flap on the lower tray and artwork depicting the contents on the lid. There is one common sprue in grey and another in clear from their other Model T kits, but a complete new body shell for the armoured car has been tooled, and a sprue added for the Vickers machine gun (we've seen this before too). This boxing has also been augmented by the addition of a WWI tank crew that was released separately earlier, who are equally at home standing outside an armoured car as a tank. In total there are four sprues in grey styrene, one in clear, plus three instruction sheet/booklets relating to the vehicle, the crew and the gun. Construction begins with trimming all the axles shorter to suit the chassis according to the initial diagram, then the front axle has the radiator attached and is glued on to the main floor pan. The engine is then made up from nine individual parts and added in behind the radiator from below. The exhaust is completed and attached to the underfloor along with the rear axle and its prop shaft. Protective side plates fitted under the floor to the outside of the chassis with a wider section covering the engine against incoming rounds. A pair of bracing struts form a triangle with the rear axle, then the chassis is flipped over. The spoked wheels are covered by flat armoured hubcaps on the outer face and have the tyres moulded-in, with one for each corner as you’d expect. The cab floor has a single plank moulded-in, with a shaped rear portion and an optional additional five planks that can be fitted in front for “ultimate” comfort. The pedal box comprises an angled trapezoid into which the three pedals fit on the right side, as this is a British vehicle. The body can now be glued to the back and sides surrounding the radiator with armoured panels, and the steering column is fixed to the steering box with controls fitted between it and the wheel. A pack of ammo boxes and a protective panel are slotted into the space to the left of the wheel, then the left door and sliding hatch is fitted offset onto the floor around the steering column and boxed in at the rear by the back panel, which also has a sliding hatch. The roof with bifold fittings moulded-in and bonnet panels are next, plus the windscreen with its visor and the lower panel for frontal protection, followed by the remains of the steering mechanism and anti-roll mechanism underneath. There’s a lot of lights on this little car, which is the sole reason they kept the clear sprue in this boxing for the lenses, starting with the headlights, then adding two wing lights and a one of the same design at the rear, plus handles for the side door and engine cowling, the latter fixed on both sides. A spare tyre is fixed to the roof on four moulded-in brackets, then the Vickers MG is built up on its tripod with an armoured splash guard and attachment ring on the jacket, which is inserted into the open rear of the car to finish the vehicle build. The figure set depicts the British crews and arrives in a slightly oversized figure shaped box with a top opening lid and captive inner flap. Inside is a single grey styrene sprue and a glossy instruction sheet with a sprue diagram on one side and painting and build instructions on the other. The sprue contains parts for four figures, all of which have separate arms, torso, legs and heads, with map case, revolver holster and gas mask bags as additional parts. The theme of the set has them looking at a map for perhaps an upcoming engagement with one crew member hunkered down pointing at a map with a stick, an officer stood with a stick looking down at the map whilst holding a map case. The other two figures are both stood upright with their heads bowed as if viewing the map, one with his battle bowler on his head and arms behind his back, the other with it in his hands in front of him. The kneeling man also has his helmet in his hand, while the officer has a cap that is made of two parts to obtain the correct shape. The officer is also wearing putties above his boots, and the bare-headed standing figure is wearing spats, while the remaining figures have their trousers loose over their boots. Painting instructions are given around the drawings, using a letter code that corresponds with a chart of Revell and Tamiya paints on the opposite side that also has the colour names if you don't use those brands. Sculpting of the figures is excellent as you would expect from ICM, and the parts breakdown is sensible, with a view to improving detail whilst minimising any filler, breaking along seams or belts where possible. Markings There’s only one markings option in the box, but then it’s a niche use armoured car, so that’s hardly surprising. The scheme is brown over grey camo, or vice versa (you decide), with white-walled tyres for the ultimate in camouflage. The decal sheet is tiny with only a couple of white stencils and two roundels with inverted colours to those you might normally expect. Conclusion A welcome reboxing for those of us that want some figures with our vehicles, and it’ll look great as a diorama if you have the time and skillset. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  4. Model T 1913 Speedster with American Sports Car Drivers ICM 1:24 (24026) The Ford Model T car has gone down in history as the worlds first mass produced car. As early as 1909 the model T competed in the transcontinental race from New York to Spokane in Washington State. Seeing the potential for racing bodies were stripped of heavy items and bucket type seats installed. Glazing was reduced and most additional items removed. Stripped down the car was more than just a mass transportation vehicle but a fun Speedster. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are four sprues of light grey styrene and, in a separate poly bag, two clear sprues, and four natural rubber tyres. As with the previously released Model T kits from ICM, the parts are really well moulded, with no sign of flash or other imperfections. There are a number of moulding pips, some of which are on quite fragile looking parts, so care should be taken when removing. The sprue gates attaching items like the exhaust are also quite heavy and I can see these parts breaking if you’re not careful. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is attached to the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, rubber tyres are added to the spoke wheels and are glued to the axles, the construction moves to the body work. The rear engine wall (not a firewall as its not solid) is made up and added, the engine covers are then added. The seat frames are added to the floor pan an then the two seats are made up and added in. The four part fuel tank is then made up and added directly behind the seats (an early safety feature NOT) this is then followed by a tool box behind the fuel tank. Up front the hand brake and foot controls are added. The steering column is then made up and the steering wheel added. On the speedster there is no windscreen on the body, but a small oval screen is fitted directly to the steering column. If carrying a passenger they have to fend for themselves! The last items to be made up are the head lights, lights and the motormeter for the radiator. Decals There are no decals included in this kit. Figures This set of figures is for the Speedster . One is a female driver and the second is a male passenger. Both are what would be considered well dressed for the period . In general the mould in crisp and clean with plenty of detail. Conclusion This is a good combination in a large enough scale for the detail to pop out. Highly recommended if you have any of the ICM model Ts. Review sample courtesy of
  5. Model T 1917 LCP with ANZAC Crew (35668) 1:35 ICM via Hannants Formed in 1914, the Australian and New Zealand Army Corps (ANZAC) played a substantial part in WWI often in areas that are seldom given the prominence of the Western Front. They were a major player in Gallipoli where they were heavily mauled due to the Lions led by Donkeys approach that pervaded at the time. They also served in Palestine and Egypt, and it was the former where they used the then new Ford Model T to replace the previous vehicles that were suffering due to the poor availability of spares, They used six of them as Light Armoured Cars, often mounting weapons in a manner that became more familiar in WWII in the shape of the LRDG. The Kit The kit arrives in the usual ICM top-opening box with the captive flap on the lower tray and artwork depicting the contents on the lid. Whoever puts those lids together certainly makes them tight and difficult to get off even after cutting the tape between the two parts. Despite being small, this is a full-detail kit and includes a nicely detailed representation of the engine using 11 parts, a two-part radiator that is moulded into the front axle and attaches to the front of the body shell along with four lifting eyes inside the engine compartment. The completed engine is dropped in behind the rad and with the chassis upended the exhaust is put in place linked to the exhaust manifold on the side of the block. The rear axle of the Model T was suspended on a single lateral leaf-spring, and this is next to be constructed along with the differential and drive shaft assembly. This is also fitted to the underside with various swing-arms and the steering mechanism, then the four single-part wheels are installed and the model is righted once you've had a few moments to appreciate the detail of the wheels, which even have the valves moulded-in. The vehicle looks a bit odd with no upper body, so with the steering column fitted the crew compartment is made up from front, sides and back which have the doors moulded in and the base of the windscreen mount added as a separate part. The cylindrical fuel tank is fitted across the cab in a gap in the floor, and additional fuel is glued to the front bulkhead as a row of four jerry cans in a box on the left side as this is a right-hand drive vehicle. The foot pedals and handbrake are added on the right and the bench seats are made up from bottom cushions (literally!), stiff back with additional cushion and armchair-like sides. Before these are fitted the fuel tank is boxed in and then they can be fixed in place alongside the folded four-part hood and the steering wheel complete with boss and two stalks, one of which was the throttle, surprisingly enough. The pedals on the floor didn't work exactly as you or I would expect either, so it's probably for the best that few of us would ever get chance to drive one. The windscreen can be found on the clear sprue as you'd expect as can the rear light, the front ancillary light and both of the wing-mounted headlights. The screen is in two parts with a C-shaped frame attached to the two halves and a pivot to allow them to be folded or opened. Another pair of fuel cans are attached to the left running board and a spare tyre (no hub) is found on the right. This kit shares the same sprues as the Utility car, and diverges after the creation of the truck bed and crew cab, omitting the canvas roof and including a yoke for the machine gun in the passenger seat foot well plus a back for the bench seat. The gun is in three parts with the barrel seemingly rested on the yoke and having no other visible means of support, which might require some detective work to make look realistic. The water rack, tool box and lights are fitted to this model as the previous option. Markings The small decal sheet contains identification numbers for two vehicles and a small crest for the radiator. The two vehicles are both painted in the overall sand scheme. Model T LCP, Dead Sea Region, Palestine 1918 Model T LCP, Palestine 1918 Crew This is ICM's Anzac drivers set. Cars won't go anywhere without crew and they help to give a vehicle a sense of human scale. Inside is one sprue of grey styrene that holds parts for two figures in ANZAC uniforms with their wide-brimmed hats. They are broken down into head, torso, arms, legs and hats with one of the co-driver's arms split between two parts to allow better adaptation to any weapon he might be tasked with. The instructions show the location and number of each part and give painting instructions that refer to a table over the page with Revell and Tamiya codes listed. Conclusion This is a good re-boxing from ICM with the addition of the crew figures. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  6. Model T 1911 Touring with American Motorists ICM 1:24 (24025) The Ford Model T car has gone down in history as the worlds first mass produced car. By 1927 in a little over 9 years 15 million cars were produced. In 1999 the Model T was crowned the most influential car of the 20th Century. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are four sprues of grey plastic, a clear spure and 4 rubber tyres. There is also one sprue for the figures. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is attached to the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, rubber tyres are added to the spoke wheels and are glued to the axles, the construction moves to the body work. The rear engine wall (not a firewall as its not solid) is made up and added, the engine covers are then added. The rear coachwork body is then made up and added to the chassis. The driver floor pan is added along with the steering wheel and column. Drivers pedals are added. The seats are then made up and added, along with the windscreen and its supporting stays. If fitting the roof this is the next part to be added (note there is no option for the roof down). The rear part has its window added and then its fixed to the roof. The stays are then added and the roof can be fitted. The horn arrangement is made up and fitted . The last items to be made up are the head lights, lights and the motormeter for the radiator. Decals There are no decals included in this kit. Figures This is ICM set 24013 "American Motorist". One is a male driver and the second is a female passenger. Both are what would be considered well dressed for the period. In general the mould in crisp and clean with plenty of detail. . Like ICM's recent figures these are well sculpted and should build up well. Conclusion This is another great addition to the Model T series that ICM have been releasing. As with the other versions, it looks like it wont be a difficult kit to make, but will look great once painted. Recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  7. Model T 1917 Touring - 1:35 ICM With Anzac Drivers (1917 - 1918) I'm not really a vehicle or figure modeller, but I do enjoy popping into this forum to other peoples work. When I saw Mike's review I jumped at the chance to actually build it as I thought it would go well with some of my WW.1 1:32 aircraft builds.. Also provided for review were a couple of figures in an 'Anzac Drivers' set. The figures are intended for the Model T LCP, rather than this kit, It is beatifically moulded with very fine detail. I build up the engine and fixed it into the chassis along with the axles and exhaust before painting, as I felt that it was simpler than trying to glue it together as pre painted sub assemblies. I kept weathering fairly light as I thought that as a staff car it would have been well kept. just a bit of dust and a few bits of scuffing here and there. Better include a picture of the engine. The bonnet is removable and a very tight fit. (I see that the white dot near the fender is where I've knocked a small 'loop' off while taking the bonnet off for the photo. I'll have to repair that). As they were designed for the wider bodied LCP kit, I couldn't fit the figures in side by side, so just used the driver. I had to remove the ffot pedals, and trim the drivers left toes off in order to fit him in. The gunner I left out will probably go in another vehicle. For now he is sitting on a dice! It is a lovely little kit, I'll certainly be making more as I already have the Standard 'B' Liberty truck lined up for a visit to the workbench. Thanks for looking, John
  8. Model T Gasoline Delivery ICM 1:24 (24019) The Ford Model T car has gone down in history as the worlds first mass produced car. By 1927 in a little over 9 years 15 million cars were produced. In 1999 the Model T was crowned the most influential car of the 20th Century. The Model In a move now favoured by ICM this box contains the earlier Model T delivery truck, and the set of Gasoline Delivery figures. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is attached to the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, rubber tyres are added to the spoke wheels and are glued to the axles, the construction moves to the body work. The rear engine wall (not a firewall as its not solid) is made up and added, the engine covers are then added. The floor pan is installed followed by the windscreen. The driver controls are then added and the front lights made up. The large commercial body of the truck is then made up and added to the chassis. The lights and other ancillary equipment is then added to finish the model. Decals A small Decal sheet provides markings for the truck as used by the firm Texaco. Figures This is ICM set 24018 "Gasoline Loaders", this two figure set from ICM comes in a small box with captive lid on the tray. There are three sprues inside, one holding the parts for the figures, the other two identical and holding the canisters that they will be moving. The figures are split down with separate heads, hats, legs, arms and torsos, with a couple of forearms separated out to achieve the desired pose and keep the detail. On fine gentleman is dressed in dungaree-style overalls and a flat cap, hefting a large canister, while the other crouches within in the van's load bed with his hands forward ready to accept it, wearing a similar cap, a shirt and ¾ length trousers with socks and shoes. Sculpting is excellent with tons of detail moulded in and realistic drape and creasing to the fabric parts. Although substantially larger than my usual 1:35 figures the level of detail included has been increased accordingly so that they don't look bland. This is especially evident in the hands and faces, which have superb detail and are different enough so that they don't look like they came out of a mould, even though they did! Conclusion This is another great addition to the Model T series that ICM have been releasing. As with the other versions, it looks like it wont be a difficult kit to make, but will look great once painted. Recommended. Review sample courtesy of
  9. American Sports Car Drivers (1910s) ICM 1:24 24014 ICM seem to be working their way through as many Ford T car variants as they can on 1:24 scale. Now they bring us a set of figures which can be used in them, mainly the sportster . One is a feamale driver and the second is a male passenger. Both are what would be considered well dressed for the period . In general the mould in crisp and clean with plenty of detail. Conclusion This is a new set of 1/24 figures in a large enough scale for the detail to pop out. Highly recommended if you have any of the ICM model Ts. Review sample courtesy of
  10. Model T 1912 Commercial Roadster ICM 1:24 24016 The Ford Model T car has gone down in history as the worlds first mass produced car. As early as 1909 the model T competed in the transcontinental race from New York to Spokane in Washington State. Seeing the potential for racing bodies were stripped of heavy items and bucket type seats installed. Glazing was reduced and most additional items removed. Stripped down the car was more than just a mass transportation vehicle but a fun Speedster. The Commercial Roadster was then seen as a sportier version of the road car. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are four sprues of light grey styrene and, in a separate poly bag, two clear sprues, and four natural rubber tyres. As with the previously released Model T kits from ICM, the parts are really well moulded, with no sign of flash or other imperfections. There are a number of moulding pips, some of which are on quite fragile looking parts, so care should be taken when removing. The sprue gates attaching items like the exhaust are also quite heavy and I can see these parts breaking if you’re not careful. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is attached to the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, rubber tyres are added to the spoke wheels and are glued to the axles, the construction moves to the body work. The rear engine wall (not a firewall as its not solid) is made up and added, the engine covers are then added. The upper body pan is added The seat frames are added then the two seats are made up and added in. There is the double front seat and a single rear. The windscreen frame is the added with the steering wheel and its column. The hood is then made up which covers the front two seats. The front lights are then made up and added as well as the side lights. Decals There are no decals included in this kit. Conclusion This is another great addition to the Model T series that ICM have been releasing. As with the other versions, it looks like it wont be a difficult kit to make, but will look great once painted. Recommended. Review sample courtesy of
  11. Model T 1914 Fire Truck With Crew ICM 1:24 24017 The Ford Model T car has gone down in history as the worlds first mass produced car. By 1927 in a little over 9 years 15 million cars were produced. In 1999 the Model T was crowned the most influential car of the 20th Century. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are four sprues of grey plastic, a clear spure and 4 rubber tyres. There is also one caramac sprue for the figures. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is attached to the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, rubber tyres are added to the spoke wheels and are glued to the axles, the construction moves to the body work. The rear engine wall (not a firewall as its not solid) is made up and added, the engine covers are then added. The floor pan is made up followed by the four part seat, which is then added in. The rear fire fighting tanks are made up and added along with an equipment basket which sits over the top. The racks for the side mounted ladders are part of the tanks construction. The steering column is then made up and added. The firefighting hose is added to the equipment basket and ladders made up and added to the side. Four different vehicle lamps are made up and added. Additional fire fighting equipment is made up ad added on the running board on the opposite side to the ladder. Decals There are no decals included in this kit. Figures This is ICM set 24006 "American Fire Truck Crew". It is a set of two figures for the fire truck. One is the driver and the second is another fireman standing on the running board directing the driver. The two figures are on one sprue of the now familiar caramac coloured plastic. There will be some seam lines to clean up on a few parts but nothing excessive. In general the mould in crisp and clean with plenty of detail. Conclusion This is another great addition to the Model T series that ICM have been releasing. As with the other versions, it looks like it wont be a difficult kit to make, but will look great once painted. Recommended. Review sample courtesy of
  12. Model T Ambulance (Early) WWI AAFS Car ICM 1:35 (35665) One of the most numerous and famous cars in the world’s history was the Model T, produced by the Ford Motor Company. These cars were widely used on all fronts during WWI. This kit is a re-release of the ambulance version, but this time the early version, so comes with an additional sprue of parts. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are three sprues of light grey styrene, two clear sprue plus a small decal sheet. All the parts are really well moulded, with no sign of flash or other imperfections. There are a number of moulding pips, some of which are on quite fragile looking parts, so care should be taken when removing. The sprue gates attaching items like the exhaust are also quite heavy and I can see these parts breaking if you’re not careful. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is moulded together with the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis, which is much longer than the other versions. The two part fuel tank is then assembled and fitted to the chassis, along with the engine assembly. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack, and two chassis end plates. The front mudguards and running boards are attached, followed by the four wheels, each moulded as single parts are glued to the axles and the instructions move to the body work. The truck bed is basically a box, made up from the two sides, each with a three part bench structure, and the front bulkhead. The rear bulkhead is made up from upper and lower segments. The upper section has two clear windows fitted, while the lower section has three bumper sections before being glued into position. There is a seven piece stretcher that is then placed in the interior. The compartment is then glued to the chassis. The drivers compartment is then assembled from the floor, three pedals, handbrake and seat cushion. The front bulkhead, with the windscreen frame moulded integrally is fitted with the windscreen and two part battery. This assembly is then glued to the drivers assembly, which in turn glued to the chassis and fitted with the steering column and steering wheel. Each of the two part bonnet sections are fitted with grab handles, then glued together, before being fitted to the engine bay. If you’re very careful, the modeller could cut the lower section of one side of the bonnet and fold it up along the hinge line to show off the engine. Two side panels are glued to the sides, just aft of the doors, followed by two storage boxes and ledges. The drivers cab roof frame is fitted along with the roof which covers the ambulance section and the drivers section. The rolled up rear panel is fitted above the rear entrance, while there is a two part container fitted to the left hand ledge, and a storage box on the right hand ledge with the spare wheel. The two lamps are assembled and glued in place along with the two, two piece, headlights and two shovels on the left hand rear of the ledge. Decals The small decal sheet contains identification numbers and Red Cross markings for two vehicles. The three AFS vehicles are intermediate blue overall with a khaki roof. Model T Ambulance 141850, France 1917 Model T Ambulance 43784, France, 1917 Model T Ambulance 44940, France, 1917 Conclusion This is a good looking kit and an interesting vehicle, especially with what looks like a ridiculous overhang of the stretcher compartment from the rear wheels. Recommended. Review sample courtesy of
  13. Model T 1911 with American Mechanics ICM 1:24 24010 The Ford Model T car has gone down in history as the worlds first mass produced car. By 1927 in a little over 9 years 15 million cars were produced. In 1999 the Model T was crowned the most influential car of the 20th Century. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are four sprues of grey plastic, a clear spure and 4 rubber tyres. There is also one caramac sprue for the figures. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is attached to the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, rubber tyres are added to the spoke wheels and are glued to the axles, the construction moves to the body work. The rear engine wall (not a firewall as its not solid) is made up and added, the engine covers are then added. The rear coachwork body is then made up and added to the chassis. The driver floor pan is added along with the steering wheel and column. Drivers pedals are added. The seats are then made up and added, along with the windscreen and its supporting stays. If fitting the roof this is the next part to be added (note there is no option for the roof down). The rear part has its window added and then its fixed to the roof. The stays are then added and the roof can be fitted. The horn arrangement is made up and fitted . The last items to be made up are the head lights, lights and the motormeter for the radiator. Decals There are no decals included in this kit. Figures This is ICM set 24009 "American Mechanics 1910". This is a set of three women mechanics in poses fixing the car. Like ICM's recent figures these are well sculpted and should build up well. Conclusion This is another great addition to the Model T series that ICM have been releasing. As with the other versions, it looks like it wont be a difficult kit to make, but will look great once painted. Recommended. Review sample courtesy of
  14. I haven't done a RFI for sometime. In fact I think I've only ever done one, maybe two This the old Airfix 1/32 1912 Ford Model T converted to a post-1917 Model T Pick-up Its far from perfect tho. Main things done were; steering connections made changed to left-hand drive instrument panel and instruments added the scuttle, radiator and engine bonnet rounded the rear deck extended and the pick-up/stake body built of plastic card windscreen glazed and mid-way bar added tilt roof rear window glazed exhaust end pipe extended with plastic tubing and angled down and outwards, away from spare wheel spare wheel mounted under pick-up body 'little-lenses' used for head lights and tail light left off everything not appropriate to a later Model T
  15. Model T 1913 Speedster ICM 1:24 The Ford Model T car has gone down in history as the worlds first mass produced car. As early as 1909 the model T competed in the transcontinental race from New York to Spokane in Washington State. Seeing the potential for racing bodies were stripped of heavy items and bucket type seats installed. Glazing was reduced and most additional items removed. Stripped down the car was more than just a mass transportation vehicle but a fun Speedster. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are four sprues of light grey styrene and, in a separate poly bag, two clear sprues, and four natural rubber tyres. As with the previously released Model T kits from ICM, the parts are really well moulded, with no sign of flash or other imperfections. There are a number of moulding pips, some of which are on quite fragile looking parts, so care should be taken when removing. The sprue gates attaching items like the exhaust are also quite heavy and I can see these parts breaking if you’re not careful. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is attached to the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis. The rear axle, drive shaft and differential are built up from only three parts and fitted to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, rubber tyres are added to the spoke wheels and are glued to the axles, the construction moves to the body work. The rear engine wall (not a firewall as its not solid) is made up and added, the engine covers are then added. The seat frames are added to the floor pan an then the two seats are made up and added in. The four part fuel tank is then made up and added directly behind the seats (an early safety feature NOT) this is then followed by a tool box behind the fuel tank. Up front the hand brake and foot controls are added. The steering column is then made up and the steering wheel added. On the speedster there is no windscreen on the body, but a small oval screen is fitted directly to the steering column. If carrying a passenger they have to fend for themselves! The last items to be made up are the head lights, lights and the motormeter for the radiator. Decals There are no decals included in this kit. Conclusion This is another great addition to the Model T series that ICM have been releasing. As with the other versions, it looks like it wont be a difficult kit to make, but will look great once painted. Recommended. Review sample courtesy of
  16. Shar2

    Model T LCP. 1:35

    Model T LCP ICM 1:35 One of the most numerous and famous cars in the world’s history was the Model T, produced by the Ford Motor Company. These cars were widely used on all fronts during WWI. In particular the Australian Mounted Division had some British Ford production Model T cars with Lewis machine guns mounted. These vehicles, called the LCP, (Light Car Patrol), saw combat in Egypt and Palestine in 1917 and 1918. The Model The model arrives in the usual sturdy box with a separate top sleeve with a nice artist’s representation of the vehicle on the front. Inside, within a large poly bag, are two sprues of light grey styrene and, in a separate poly bag, one clear sprue. On initial inspection the parts are really well moulded, clean, with no sign of flash. There are a number of moulding pips, some of which are on quite fragile looking parts, so care should be taken when removing. The sprue gates attaching items like the the exhaust are also quite heavy and I can see these parts breaking if you’re not careful. The build starts with the nicely detailed engine with the block and gearbox halves glued together followed by the addition of the rocker covers, fan belt, dynamo, exhaust manifold, cooling fan, cooling pipes, and other sundry items. The radiator is moulded together with the front axle and just needs the radiator grille glued to it to complete the assembly. The radiator/axle is then glued to the front of the floor pan/chassis along with four eyebolts/engine mounting bolts. The two part fuel tank is then assembled and fitted to the chassis, along with the engine assembly. The rear axle, drive shaft and differential are built up from only three parts and fited to the underside of the chassis along with the two piece exhaust/silencer unit. The front and rear axle support frames are then added, as is the steering rack. The four wheels, moulded as single parts are glued to the axles and the instructions move to the body work. The truck bed is made up of the bed, sides, front and rear sections, in addition to the outer curved panels, bench seat and rolled up canvas cover. The gear stick and steering column are then fitted to the chassis as is the truck bed assembly. The two part battery is fitted to the driving compartment bulkhead, along with the coaming, doors and three foot pedals. This assembly is then fitted into position between the truck bed and engine compartment. Each of the two part bonnet sections are fitted with grab handles, then glued together, before being fitted to the engine bay. If you’re very careful, the modeller could cut the lower section of one side of the bonnet and fold it up along the hinge line to show off the engine. Each of the two styles of headlights and single tail light are assembled, as is the steering wheel and column and seat back/bulkhead. The machine gun mount is glued into position on the passenger side and fitted with the three piece Lewis machine gun. The model is completed with the fitting of the spare tyre, the headlights/tail light, a three piece storage box and three piece water container. Decals The small decal sheet contains identification numbers for two vehicles and a small crest for the radiator. The two vehicles are both painted in the overall sand scheme. Model T LCP, Dead Sea Region, Palestine 1918 Model T LCP, Palestine 1918 Conclusion It’s good to see these rather unusual vehicles being released, particularly for the WWI aficionados and also remembers the role played by the Australian forces during the Great War. Whilst not a complicated kit, certainly by ICM standards, it looks like it will build into a nice little model. Review sample courtesy of
×
×
  • Create New...