Jump to content

Search the Community

Showing results for tags 'Hannants'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Calendars

  • Community Calendar
  • Group Builds
  • Model Show Calendar

Forums

  • Forum Functionality & Forum Software Help and Support
    • FAQs
    • Help & Support for Forum Issues
    • New Members
  • Aircraft Modelling
    • Military Aircraft Modelling Discussion by Era
    • Civil Aircraft Modelling Discussion by Era
    • Work in Progress - Aircraft
    • Ready for Inspection - Aircraft
    • Aircraft Related Subjects
  • AFV Modelling (armour, military vehicles & artillery)
    • Armour Discussion by Era
    • Work in Progress - Armour
    • Ready for Inspection - Armour
    • Armour Related Subjects
    • large Scale AFVs (1:16 and above)
  • Maritime Modelling (Ships and subs)
    • Maritime Discussion by era
    • Work in Progress - Maritime
    • Ready for Inspection - Maritime
  • Vehicle Modelling (non-military)
    • Vehicle Discussion
    • Work In Progress - Vehicles
    • Ready For Inspection - Vehicles
  • Science Fiction & RealSpace
    • Science Fiction Discussion
    • RealSpace Discussion
    • Work In Progress - SF & RealSpace
    • Ready for Inspection - SF & RealSpace
  • Figure Modelling
    • Figure Discussion
    • Figure Work In Progress
    • Figure Ready for Inspection
  • Dioramas, Vignettes & Scenery
    • Diorama Chat
    • Work In Progress - Dioramas
    • Ready For Inspection - Dioramas
  • Reviews, News & Walkarounds
    • Reviews
    • Current News
    • Build Articles
    • Tips & Tricks
    • Walkarounds
  • Modelling using 3D Printing
    • 3D Printing Basics
    • 3D Printing Chat
    • 3D Makerspace
  • Modelling
    • Group Builds
    • The Rumourmonger
    • Manufacturer News
    • Other Modelling Genres
    • Britmodeller Yearbooks
    • Tools & Tips
  • General Discussion
    • Chat
    • Shows
    • Photography
    • Members' Wishlists
  • Shops, manufacturers & vendors
    • Aerocraft Models
    • Air-craft.net
    • Amarket Model
    • A.M.U.R. Reaver
    • Atlantic Models
    • Beacon Models
    • BlackMike Models
    • Bring-It!
    • Copper State Models
    • Freightdog Models
    • Hannants
    • fantasy Printshop
    • Fonthill Media
    • HMH Publications
    • Hobby Paint'n'Stuff
    • Hypersonic Models
    • Iliad Design
    • Hobby Colours & Accessories
    • KLP Publishing
    • L'Arsenal 2.0
    • Kingkit
    • MikroMir
    • Model Designs
    • Modellingtools.co.uk
    • Maketar Paint Masks
    • Marmaduke Press Decals
    • Parkes682Decals
    • Paulus Victor Decals
    • Red Roo Models
    • RES/KIT
    • Sovereign Hobbies
    • Special Hobby
    • Test Valley Models
    • Tiger Hobbies
    • Ultimate Modelling Products
    • Videoaviation Italy
    • Wingleader Publications
  • Archive
    • 2007 Group Builds
    • 2008 Group Builds
    • 2009 Group Builds
    • 2010 Group Builds
    • 2011 Group Builds
    • 2012 Group Builds
    • 2013 Group Builds

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. B-26K with USAF Pilots & Ground Personnel (48280) 1:48 ICM via Hannants Ltd The A-26 was built by Douglas during WWII as the successor to the A-20 Havoc. Two types were designed, The C with a glass bomber nose and the B with a full metal nose filled with either 6 or 8 .50cal machine guns, which coupled with the three in each wing gave it quite a punch, deserving of the Strafer title. It also had a pair of turrets on the fuselage mid-upper and dorsal positions, which were both operated by a single gunner using a complex remote mechanism that flipped between the upper and lower turrets depending on where the gunner was looking through his binocular sights. This trained the guns accordingly and also calculated the correct offset for parallax and lead, but was very complex and caused some delays to it entering service, and even more issues with maintenance in the field. In 1948 it was re-designated as the B-26 by the US Air Force to confuse us, and later on back to the A-26 just to complete the process of befuddlement. It was developed a little after the Marauder and despite using the same engines it was conceived totally separately from its more rotund colleague. It was initially less than popular in the Pacific theatre where its poor cockpit view due to the canopy and engine position rendered it unloved by the first users. It was more popular in the European theatre and was accepted as a replacement for the Havoc fairly quickly. After the war it served in Korea, early Vietnam engagements and other conflicts, ending its days in US service with the Air National Guard in the early 70s. In the mid-1950s some Aircraft were converted to the Drone controller role with the DC prefix to launch Ryan Firebee drones in support of combat training. In a late twist the B-26 would be brought back in the 60s for the Vietnam War because it could still hold its own in combat. The aircraft externally still looked very much like the WWII aircraft, but the turrets were removed in favour of fixed forward firing guns and four hard points were fitted to each wing, allowing the carrying of 8,000lbs of ordnance. The wings of these aircraft were rebuilt and strengthened, the rudder was enlarged and permanent tip tanks (65 US Gal) were added to the main wings. Anti-icing was added to the airframe to cope with cold weather and higher altitudes, and a new anti-skid braking system was also added. In the cockpit the dials and displays were updated and a secondary control yoke was added to allow control from either seat. New 2,500hp engines were added inside the nacelles, along with cuffed broad chord props to cope with the enhanced power delivery. The USAF ordered 40 of the "new" aircraft which were known as Nimrods locally to their crews. As well as combat operations in South east Asia some aircraft flew on the down-low with the CIA in the Congo. The last aircraft were finally retired by 1969 when AC-130 gunships took over their night interdiction role. Only 6 of the type survive, with "Special Kay" having been restored to Flight as a memorial to crews who fought the covert missions in South East Asia. The Kit This is a new variant from the recent tooling from ICM, and this is the second boxing now of the so-called Counter Invader. While you get many parts from the original Invader boxings, this edition features a new fuselage sprue, new wing sprues, a new rudder, new engine nacelles, a pylon sprue, and weapons sprues ICM previously released as a stand-alone US Armament set. It also includes a new sprue filled with five crew figures, which we’ll cover toward the end of this review. It arrives in the familiar top opening box with a captive inner lid to the lower tray. Inside the box are a healthy fifteen sprues in grey styrene, one in clear, two decal sheets and the instruction booklet plus two extra instruction sheets for the armament & figures. A quick look over the sprues reveals that panel lines are very crisp, narrow and restrained, the surface is matt and very neat-looking, with plenty of engraved and raised details on the parts, plus subtly indented flying surfaces simulating their fabric covering. There are a number of red blocks printed over the sprue map, which shows how many of the parts will be left on the sprues once you have completed construction, such as original wings, props, cowlings and one of the canopies. If you’re a bit ham-fisted and plan on building many Invaders, you could well find these come in useful down the line. New Parts Original Parts Construction begins with the internal bomb load, which is then placed within the port fuselage half along with some detail panels and bulkheads. The former gunner’s position and the cockpit are next, creating the pilot's seat, instrument panel (with instrument decals), centre console with throttle quadrant before adding those and the twin control columns to the floor. The aft compartment is built up around the front wing spar with a set of radio gear hanging from a pair of risers and a pair of wing spars, so you'll have to do some detail painting as you go. After this the starboard fuselage side is prepped, with the right side of the cockpit and bomb bay with its detailed ribbing. With that and a quantity of detail painting you can then slide the starboard fuselage over the two spars, and it would be a good idea when fitting those spar parts to let the glue set up with the starboard fuselage taped in place to ensure they make the correct angle when they're set in place permanently. The instructions then have you building up the tail feathers, with the elevators having separate single-part flying surfaces, plus a two-piece rudder to attach to the moulded-in tail fin. The gun-nose comprising the fixed lower and rear section of the nose are built up out of three parts, making space for the 40g of nose weight you are encouraged to fit before you add the single cowling panel that covers the gun bay, with a pair of four-barrel gun-inserts added through the holes to depict the .50cals. You'll need to drill out the muzzles or take the lazy way out and get a set of Master barrels. The nose section is a straight-forward butt joint to the fuselage, with a small half-moon cut-out that should help align it. The new wings are next with a small radiator intake prism moulded-in to which you add a radiator panel, and the lower parts have holes and long depressions ready for the four pylons per wing. You'll notice that there are fairings and a hump in the upper wing where the engine nacelles will be, and these are separate assemblies to be built up later. First, the separate two-section flaps, and the ailerons are prepared and added to the trailing edge of the wings, the latter being of one piece each and slotting into the wing via two tabs. The tip tanks are made of two halves and are glued in place, and underwing landing lights are added from clear parts. At this stage the instructions have you sliding the wings onto the spars and gluing them in place. Whether you'd rather wait until you've added the engine nacelles though is entirely up to you. It’s your model! There are of course two engine nacelles and these build up pretty much identically apart from their outer skins, which are handed to fit their respective fairings as you'd expect. They are split vertically, and each half has internal structure moulded-in, with bulkheads added fore and aft of the gear bays, coupled with bay lip inserts that bulk out the edges and also hold captive their bay door. This may require some clever masking and a little care during handling, but it shouldn't hold you up too much, as the hinge-points are relatively robust. The two halves are joined together, the prominent intake on the top of the nacelle is made up from two parts, then is added to the nacelle front which is in turn glued to the rest of the nacelle, with the completed assemblies attached to the wings from the underside, as yet without their engine cowlings, engines or props. The engines are added later in the build, and the Twin Wasps are depicted in their entirety with both banks of pistons, push-rods, ancillaries and reduction housing at the front, plus the collector ring and exhausts at the rear, the latter made up from eight parts each. Again, the engines are identical and interchangeable with each other, and they fit to the nacelles with a teardrop-shaped tab, after which the engine cowling is slotted over them. The cooling flaps are last to be added in four sets around the rear of the cowling. The top of the fuselage is still open at this point, as it has an insert with the faired over section where the top turret used to be, with another for the former dorsal turret fitted later on. Each of the three tyres are made from two halves with separate hubs applied from either side, then hung on their respective legs, which have retraction jacks and scissor links added along the way. Happily, these can be fitted late in the build, so the open bays can be masked quicker than if they were present. Speaking of bays, you can depict the bomb bay open or closed by using either a one-piece door for closed, or two separate doors with internal detail for open. This is nice to see, as it's always a little tricky to join two doors and get them aligned with the fuselage so there are minimal join-lines. The main airframe is ostensibly complete save for some antennae and the new broad-blade props, and if you've been sparing with the glue when assembling the engines, the latter should still spin once complete. The four pylons per wing are each made from two parts, and should have some 0.8mm holes drilled in their lower surface for later use, then you need to make a choice what to put on the pylons, with the help of a load-out diagram provided, or from your own references. US Aviation Armament (48406) As well as the internal bomb load, there are four sprues containing various munitions, as follows: 2 x LAU-10A Pods of 5" Rockets 2 x LAU-69 Pods of 2.75" Rockets 2 x LAU-68 Pods of 2.75" Rockets 2 x BLU-23 500LB Fire bombs (Can be made with or without the fins) 2 x BLU-27 750LB Fire Bombs (Can be made with or without the fins) 2 x Mk.77 750LB Incendiary Bombs 2 x SUU-14 Dispensers 2 x Mk.81 Snakeye Bombs* 2 x MK.81 Low Drag Bombs* 2 x Mk.82 Snakeye Bombs* 2 x Mk.82 Low Drag Bombs* *All of the above bombs can be fitted with Fuse extenders In addition, there are 2 MERs with Sway braces, with what look to be 12 Flares to load on the MERs. All of the parts are well moulded and there are enough parts to give some additional detail to the weapons. US Pilots & Ground Crew Personnel - Vietnam (48087) This new set is designed for this kit, but could equally be used elsewhere. There are two pilots getting ready for flight, one of whom is carrying a helmet. An officer figure (possibly maintenance) is standing around with a clipboard in hand, with two ground crew reaching above their heads to fiddle with things such as the external weapons. The uniforms are Vietnam era and the sculpting is up to ICM's high standards. Markings In this diorama-style boxing there are four similar options included on the decal sheet, all of which are in Vietnam light and dark green, brown and black camouflage. From the box you can build one of the following: 64-17651, 56th Special Operations Wing, 609th Special Operations Sqn Nakhon Phanom 1969, "Mighty Mouse" name and artwork 64.17649, Davis-Monthan AFB, 1970 "Sweet Therese" name 64-17645, 56th Special Operations Wing, 609th Special Operations Sqn Nakhon Phanom 1969 64-17679, 1st Special Operations Wing, USAF Late 1960s "Special Kay" name. This aircraft has been restored and is the only B-26K flying The decals are printed anonymously, although they look like DecoGraph's output to my eye. They have good registration, colour density and sharpness, and include a number of stencils that are legible with the right optics. The decals for the armaments are of the same quality and sharpness. Conclusion This model is excellent for anyone wanting to create a diorama or at least add a few weapons and figures to their model. Detail is excellent and the addition of the figures and weapons is great news. Very highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  2. Royal Marines Officer (16012) 1:16 ICM via Hannants Ltd The Royal Marines are a naval fighting force that can trace their lineage back to the 1600s, and are a proud group of soldiers that go through a tough selection process that sorts out the wannabes from the actual hard-men that can handle the rough and tumble of their taxing schedule, which includes official duties as well as their Commando and other roles that they undertake when required. The Kit This figure model depicts a Lieutenant in the Royal Marines (If I’ve read his shoulder boards right) dressed in his dark blue ceremonial uniform with red piping down his pants, and with his ceremonial sword held out at waist height resting over his right shoulder, a white and red peaked cap atop his head, and three medals on his left breast pocket. The uniform is Best Blue, and the sword is based on the Infantry Sword pattern of 1897, with a three-quarter basket guard on the hilt, pierced and beautifully etched with a pattern incorporating the royal cypher of the Queen. The scabbard is held at rest vertically by his free hand on a belt-mount that has an over-shoulder stabilising strap. It arrives in ICM’s usual top-opening box with captive inner lid, and inside are two sprues of grey styrene, a sprue of black styrene and plinth, plus a single instruction sheet printed in colour on both sides. At the bottom of the box you will also find a print of the photo-realistic artwork, which could be framed and hung if you're so minded. Construction and painting guides are shown on the same set of diagrams, using the parts on the grey sprues, which comprise separate head, torso, legs and arms, plus individual tails to his jacket and two shoulder boards. Due to the position of the hands around the sword and scabbard, the fingers are supplied separately moulded, with two strap sections for the scabbard on the left. The sword is finely sculpted and has a separate hand guard that slips over the blade during construction. The base is moulded in black styrene, and has a choice of four different surfaces for the top and a flat base for the bottom. The choices comprise a flat asphalt surface plus three styles of cobble or paving stones. Markings There are no decals included in the box, but the various badges, medals and emblems are all shown with colour call-outs, and they are all large enough to be painted carefully by hand, although the piping down the trousers will need a steady hand, some decal strip, or careful masking. Conclusion This is a handsome kit of a ceremonial uniform worn by one of the most elite British soldiers with a huge vault of history standing behind this young officer. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  3. Model T 1914 Fire Truck with Crew (35606) 1:35 ICM Via H G Hannants Ltd The Ford Model T has gone down in history as the world’s first mass produced car, introducing the production-line in a manner that would still be familiar to modern eyes, only perhaps with not so many robot arms flailing around. That production line ran from 1908 to 1927 with over 15 million sold. Its so-called three-speed transmission included a reverse gear rather disingenuously, and the four-cylinder 2.9 litre engine could output a whole 20bhp through the rear axle to reach a top speed of just over 40mph at some point after you floored it downhill with a trailing wind. It was capable of 25mpg with a light foot, and over the course of production, many different applications and body styles were envisaged for the first world-car, including armoured cars, trucks and vans. The Kit This is a new boxing of the recently released base kit with new parts specific to its task and a set of crew figures to give it some human scale, which you’ll find near the bottom of this review. It is in the predominant AFV scale of 1:35, although ICM have also tooled a 1:24 series of kits that have been released alongside these to appeal to the car modellers in their main scale. It arrives in a medium-sized top-opening box with ICM’s usual captive inner lid, and inside are fives sprues in grey styrene (three for the figures), a small sprue of clear parts, no decals and a glossy colour instruction booklet with the painting guide on the rear page in full colour. Construction begins with the radiator surround that is moulded to the front axle and has the Ford logo in the centre of the core insert, and on the header tank of the surround. This is fitted to the floor pan, which has two styles of tread-plate engraved into the footwells and the running boards between the fenders. Some small parts are added under the front, then the engine block is made up with its transmission and other ancillaries added along the way. Incidentally, this engine stayed in production until 1941, long after the Model T became extinct as a complete vehicle. The engine is fitted into the bay behind the radiator, and is plumbed into it with entry and exit hoses. Underneath is the long exhaust pipe with a single muffler box that is made from two halves with the exhaust tip moulded to the separate part that extends it to the back of the vehicle. The drive-shaft with its large differential housing is fitted between the rear drive-shafts and suspension part, and is inserted into the underside with the drive-shaft mating to the back of the angular transmission housing. Suspension braces are added to the front and rear axles, along with the steering arms that fit to the rear of the front axle, then the single-part spoked wheels with pneumatic tyres moulded-in are clipped over the ends of each axle. The wheels are very well moulded, with air valves and sharp spokes on each one, plus a well-defined rim and tyre tread detail. The early Model T had a faceted five-faced cowling over the engine until 1914, the two sides lifting up on a central hinge that ran from front to rear of the top face. The hinge is attached between the bulkhead and the radiator, and the two lift-up panels are added over the top to complete the cowling, although you could also leave one or both open to show off the engine, but you’ll need to remove a couple of ejector-pin marks, which is easily done because the cowlings are flat-surfaced and should be a little thinner to be more realistic anyway. The front floor pan has the Ford logo in the passenger well according to the instructions, but there’s just a section of ribbing there on the plastic, as well as some more treadplate patterning, and this is sandwiched between the two lower sides of the body, with a spacer at the rear. It is lowered onto the chassis and the three foot pedals and handbrake lever are inserted into their slots on the left (wrong) side. A quick trip to the furniture store has you making up the front seats (read “couch”) from an L-shaped seat pad with quilted surface, and matching texture is also present on the arms. The completed soft furnishing is fitted within an outer shell that is made from base, back and two side panels, then it is installed on the raised platform between the front and rear areas. A rear lamp is made up with a clear three-sided wrap-around lens, then the rear passenger compartment is filled with a pair of water tanks, which are three parts each, and joined together by a frame that has control wheels at the rear, along with pressure regulators with more valves on the top. A large stowage box is fitted on a frame over the tanks, and each side is perforated to form a diamond mesh pattern, with a coiled hose placed in the bottom, linked to the manifold in the rear of the vehicle. The driver’s fifth wheel has a pair of controls mounted at the top and a long column added, then it is slid into a hole in the sloped part of the floor in front of the pedal box. Two front lights are made up in the same manner as the rear lamp, but they have handed brackets to fit on the bulkhead, while a two-layered ladder is fastened to the left side of the vehicle on a pair of brackets that form part of the rear equipment area. Two more headlamps are each given clear lenses and their cylindrical bodies are made of two halves, split top and bottom. Another lamp, this time a searchlight also has a clear lens and fits to the top of the bulkhead, with a bell for the dinging-of on the opposite side next to the driver. Two types of fire extinguisher and a short drum are the final parts that fit on the right running-board, with the optional hand-crank for the engine slipped into the front under the radiator. Markings There is only one colour option supplied on the back page, and it’s not going to surprise anyone that it’s predominantly red with a bit of brass for the fitting, plus a pale grey set of old-fashioned bicycle-like tyres. When did tyres become black? There are no decals as already mentioned, so registration and all that aren’t of any interest for a change. Cool. The Figures This figure set depicts a brave crew of four lads to populate the area around your model or diorama base. They are attending a fire in their great-coats, big boots and wide-brimmed hats that were often made of heavily treated leather, and sometimes still are. They arrive in a small top-opening box with captive inner lid, and inside are three sprues in grey styrene, plus a folded instruction and painting sheet. There are four figures on the large sprue, with their hats and equipment spread over two small identical sprues to complete the set. They are all standing, and three are wearing the afore mentioned gear, while another is carrying his hat in one hand and a bedraggled moggie in the other, presumably having just been rescued from the fire. The other three all have moustaches, and one of them (the men, not the moustaches) is pointing up at something whilst holding his helmet in place, another has a fireman’s axe over his should, and the third is carrying an equally bedraggled child in tattered clothing in his arms, walking away from danger and into the waiting arms of a medical team or his worried parents. The sculpting is up to ICM’s usual high standard, and breakdown is sensible with separate arms, torso, legs and lower tails of their coats that fit over slimmed-down thighs to keep things in scale. The jackets have crisply moulded brass clasp-type closures, and the helmets have the prominent seams visible where the leather sections of the crown are sewn together. The prominent badges on the front of their helmets are separate with a pointed support piece in addition, as they stand higher than the helmet’s cap, and are again better detailed as a result. There are two separate raised collars too for added detail, the little boy is broken down in a similar manner to the main figures, and even the cat has a separate head to give it a more realistic level of detail. Conclusion ICM have done really well with this range of Model Ts in both scales, although the 1:35 kits are of more interest to me personally. Moulding is excellent, with some really crisp detail on show, both in the bodywork areas as well as those ever-so-comfy front seats. Adding the figures broadens your options for displaying your model, and the excellent sculpting matches the quality of the rest of the kit. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  4. American Fire Truck Crew 1910s (35622) 1:35 ICM via H G Hannants Ltd The fire crews in the early 1900s had a lot more work to do than modern crews thanks to the haphazard nascent electric networks of the day, and the probabilities that some of the least well-to-do were still using candle-power or gas to light their way, and coal or log fires to keep themselves warm. Add to that the fact that a lot of early fire crews were volunteers, and their protective gear was a large shaped leather hat with a wide brim, a thick coat and heavy boots, and it’s largely a thankless task. They still used to go out risking life and limb whenever the bell rang though, rescuing people and pets wherever they were able. This figure set depicts a brave group of four lads doing just that. Attending a fire in their great-coats, big boots and wide-brimmed hats that were often made of heavily treated leather, and sometimes still are. They arrive in a small top-opening box with captive inner lid, and inside are three sprues in grey styrene, plus a folded instruction and painting sheet. There are four figures on the large sprue, with their hats and equipment spread over two small identical sprues to complete the set. They are all standing, and three are wearing the afore mentioned gear, while another is carrying his hat in one hand and a bedraggled moggie in the other, presumably having just been rescued from the fire. The other three all have moustaches, and one of them (the men, not the moustaches) is pointing up at something whilst holding his helmet in place, another has a fireman’s axe over his should, and the third is carrying an equally bedraggled child in tattered clothing in his arms, walking away from danger and into the waiting arms of a medical team or his worried parents. The sculpting is up to ICM’s usual high standard, and breakdown is sensible with separate arms, torso, legs and lower tails of their coats that fit over slimmed-down thighs to keep things in scale. The jackets have crisply moulded brass clasp-type closures, and the helmets have the prominent seams visible where the leather sections of the crown are sewn together, and now I’m wondering how I know this? I think we can blame TV’s “How It’s Made” for that. The prominent badges on the front of their helmets are separate with a pointed support piece in addition, as they stand higher than the helmet’s cap, and are again better detailed as a result. There are two separate “popped” collars too for added detail, the little boy is broken down in a similar manner to the main figures, and even the cat has a separate head to give it a more realistic level of detail. Conclusion Excellent detail throughout, and I suppose that we should say there are six figures in the box if we’re including the boy and the cat. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  5. OV-10D+ Bronco (48301) 1:48 ICM via H G Hannants Ltd The Bronco was conceived as a light attack, long loiter aircraft of modest size, enabling it to operate from unprepared fields and roads close to the combat zone. As so often seems the case, the final design turned out to be much larger and heavier due to the requirements of the avionics and ejection seats, thus limiting its use to conventional airfields. The twin boom aircraft first flew in 1965 and was destined to serve with the US Navy, Airforce and Marines as a replacement for the Cessna O-1 Bird Dog & O-2 Skymaster. The Marines were the first to take the OV-10 into service as a forward air controller platform operating both night and day missions. Whilst the Bronco is best known for its operations in Vietnam, it also served in later conflicts as late as the Gulf War before being retired from US service in 1995. The USAF received Broncos in 1968 and deployed the aircraft in the Forward Air Control (FAC) role, using smoke laying methods initially, and later using laser targeting designators. Eventually after extensive modernisation to the -D model with the addition of a FLIR turret and new avionics, then another upgrade to the -D+ version that involved replacement of much of the wiring loom and further stiffening of the wings to enable it to carry more and fly harder. By this time it carried its own ground attack armament including rockets, machine guns and bombs, plus targeting equipment that gave it the capability of Light Attack Aircraft, and made it a scary prospect for the enemy to see overhead. Seven export contracts were signed with other foreign operators including Germany, Columbia and Indonesia, Each having their own letter suffixes, and the very last of which will be leaving service in the near future after long service. The Kit This reboxing of a new tooling from ICM that relieved us all of the ancient Testors kit with its legendarily incorrect wings and nacelle locations, has been partly retooled to reflect the changes to the fuselage sponson and tail booms that had occurred by the time the D+ went into service. It arrives in one of their standard top opening boxes that has their usual captive inner lid, and has ten sprues in grey styrene, one in clear, two sheets of decals and a glossy instruction booklet with spot colour inside and glossy colour profiles on the back pages. De-bagging the kit reveals that one of the sprues has been snipped in half to fit within the smaller bags, the detail is excellent, and the new booms have raised as well as engraved rivets on their surface, which is just as it should be if you check out any walk arounds that get close enough to the aircraft to show them. The clear parts are the same, and have been engineered so that they fit together as individual facets that are crystal clear, allowing the modeller to see their hard work in the cockpit, providing they don’t put any gluey fingerprints on the glazing during the build. Overall, it looks like it will build into an excellent replica of the aircraft. There is also a diagram containing templates for masking up the canopy in the rear of the booklet, which will come in useful if you don’t trust your own skills or have the Eduard masking set that is probably making its way here as I type this. Construction begins predictably with the cockpit, starting with the crew seats, of which there are two. The base of the seats are made from the curved lower and cushion, while the backs are formed from a shell with two cushions, one for the pilot’s back, the other for the headbox. The two elements are brought together and a small part is added to the headbox, then different rear detail and a launch rails are added to the rear of them both. There are colour call-outs as we go along, and two warning decals are supplied for the cushions, and that’s exactly where they should go. The rear seat is glued to the cockpit floor, which has a bulkhead and a shelf moulded into the rear, then a divider between the two seats is prepared with rudder pedals, equipment and other details. The front seat with its “ears” is inserted into the cockpit, and side consoles are fixed onto the floor around him with control column and pedals on a lateral support, plus a throttle quadrant that sits on top of a raised portion of the port console. The consoles have detailed tops but no decals, which is a shame. A bulkhead for within the footwell of the front cockpit is created from a number of parts, and is fixed in place with the details facing forward, forming the rear bulkhead of the nose gear bay, then the pilot gets a well-appointed instrument panel with coaming and decal, plus a number of small parts sitting on top of the coaming. This is glued in, and more details are added to the rear shelf in the shape of equipment boxes that probably have blinking lights on the real thing, just in time for Christmas. The cockpit is put to the side briefly while the crew nacelle is prepared with interior sidewall details, plus an internal frame that runs up the side of the canopy. You are advised to align this with the canopy sides, which both have a shallow internal groove running top to bottom, so it would be an idea to glue the parts, then tape the canopy sides in place and align the frame with the groove, taping it in position until the glue sets. With the sides complete and painted internally, the cockpit can be secured inside and locked in place by bringing the two halves together with a small bulkhead and linking hose added into the new nose. With the fuselage closed up, a small insert is glued into the hole in front of the cockpit, and the underside of the cockpit floor is then covered over by a well-detailed underside panel that has recesses ready for the stubby weapons pylons, and has a small central strake added toward the rear. Here it will be key to align the nacelle skins before the glue sets to avoid having to make good later and risk losing any of that lovely detail. Providing you have painted the front of the crew nacelle, the nose gear bay is already complete and just needs the main strut, a diagonal support that goes far back under the canopy, and a pair of bay doors. The weapons “wings” need four holes drilling in their underside if you are going to hang weapons from them, then they are closed up around a small rectangular insert that the gun barrels later plug into, the winglet-tips are added, and each one has an insert applied to the leading edge that makes up the rest of the fairings for the weapons. These are glued into their recesses on the underside. Another small nose gear door fits to the diagonal leg, and the four-part nose wheel with separate hub parts is first trapped between the yoke, which is then glued to the bottom of the nose strut along with the other half of the oleo scissor-link. I still suspect this could be a weak point of the nose gear, so ensure you leave this to set up for a good while before attempting to put weight on it. The addition of the four gun barrels to the winglets, the weapons shackles underneath, the FLIR turret and a couple of sensors completes the crew nacelle for now. The upper wing of the Bronco is a single full-width part that also has a section of the fuselage upper and the twin boom tops moulded-in, while the underside is in four sections. Before the two surfaces are joined, two spar sections are attached to the upper wing straddling the future location of the engine nacelles, and if you plan on adding wing pylons, there are a few holes to be drilled in the outer lower panel of the wings. All the flying surfaces are separate and the twin flap sections per side are made of three parts laminated together, while the ailerons are a single part each to which are added balances and trim actuators. When completed, the six flying surface sections are fitted to the cut-outs at the rear of the wing unit along with a pair of actuators for the ailerons, a pair of exhaust deflectors on top of the engine nacelles, and a large sensor blister with infrared dazzler turret at the centre-rear. The wing assembly is then mated to the crew gondola, and the canopy is begun. The blown windscreen that offers the pilot a good field of view has a sight fitted to the top centre before it is glued to the front of the cockpit, then has the clear canopy roof put in place, bridging the gap between the windscreen and cockpit rear. The two canopy sides are next, and these parts are each single pieces, which doesn’t give the modeller the opportunity to prop the front two sections in the open position without taking their life in their hands and cutting the parts with a razor saw or fine scriber and a lot of trepidation. Hopefully an aftermarket company will step-in here to help those of us that like to pose our cockpit open. Building of the two nacelles begins with the gear bays, which starts with the making of the gear legs that have two main parts and a Y-shaped insert that traps the lower section in place but leaves it movable. Two more parts make up the suspension strut, which are also trapped in place by a V-shaped insert, and then glue is applied to the previously mobile joint, setting the correct angle for the leg permanently. It is glued to the stepped bay forward roof with a number of small parts, after which it is joined by the detailed sidewalls, rear bulkhead and another few parts to close over the rear of the roof and add more detail. The nacelle sides are joined around the bay assembly, capped off at the front by the intakes and propeller backing plate. Underneath, the triangular inserts with their many raised rivets are glued in carefully to avoid damaging that lovely detail. The two-part rudder is fixed to the tail, and an exhaust is made up from two halves, with baffles within that fits into a recess in the nacelle side. Align these carefully to minimise the join-line and check your references to get them right. A small intake is added to the side of the nacelle just forward of the exhaust. This process if carried out twice of course, in mirror-image so your Bronco doesn’t fly round in circles. The large horizontal elevator panel is made from top and bottom surfaces plus the elevator itself, and this is slotted into position between the nacelles as they are glued into place under the wings. You might need to grow another hand or two to make this happen, or get yourself one of those wonderful jigs like that of EBMA to help hold everything in place for this. Four optional shark-fin spoilers can be glued onto their corresponding slots in the top of each wing if you wish, or leave them in the box for a clean upper wing. The twin props have the three short blades moulded as one, with a front and back boss, and take care to install the correct props on the nacelles, as the blades (and the turboprop engines within) are handed, spinning in opposite directions to cancel out the effect of torque steer. A windscreen wiper and various sensor lumps are added around the fuselage, with more underneath, at which point you’ll notice that the main gear is without wheels. Each of these are made of a two-part wheel and two-part hub, with no weighting moulded-in, although that’s easily remedied by a quick sanding of a flat-spot on the bottom, just don’t overdo it so it looks like it needs more air. The weapons are next, and this modeller thinks that any Bronco looks best when loaded for bear, as they say. There are two wing pylons on long supports to add to the outer wing panels, then it’s just a case of choosing which munitions you want to hang from them. There is a diagram showing which weapons can be fitted to which pylons, but if you’re aiming for realism, check your references to establish real-world load-outs for training or live-fire missions. In the box you get the following: 2 x LAU-33 twin rocket pods 2 x LAU-069A 21 rocket pods 2 x Mk.77 Incendiary bombs 2 x LAU-68 6 rocket pods 2 x 150gal fuel tanks 2 x Mk.81 Lowdrag iron bombs with optional daisy-cutter fuse 2 x Mk.81 Snakeye iron bombs with optional daisy-cutter fuse 2 x Mk.82 Snakeye iron bombs with optional daisy-cutter fuse 2 x Mk.82 Lowdrag iron bombs with optional daisy-cutter fuse 2 x LAU-10A 4 rocket pods The detail on the individual weapons is excellent, with multiple parts for fins, fuses and rockets, and only the seamlines to clean up along the way. There are also plenty of stencils for the weapons that you can see below: The canopy is about as clear as can be, so it’s going to be important to mask it up before you inadvertently ruin the startling clarity. Although masks aren’t included in the box, there is a handy template near the back of the instructions that you can place tape on and cut out masks for your use on the model. Each section is numbered and there is another drawing showing their location on the canopy. Markings There are five options in the rear of the instructions in various schemes, that should please a lot of people. From the box you can build one of the following: 155473 Marine Observation Sqn.2 (VMO-2), Saudi Arabia, 1991 155489 Marine Observation Sqn.1 (VMO-1), Aircraft Carrier USS Theodore Roosevelt, 1990 155494 Marine Observation Sqn.2 (VMO-2), Saudi Arabia, 1991 155494 Marine Observation Sqn.2 (VMO-2), early 1990s (assumed) 155499 Marine Observation Sqn.1 (VMO-1), early 1990s Decals are printed by ICM’s usual partners on bright blue paper, with good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. The weapons all have stencils to apply, which are shown at the bottom of one page and next to each profile in the case of the fuel tanks and props. There are also red and white tip decals for the props, and the large wide T-shapes on the upper wings are also included as decals, as are the tapered exhaust gas “disguisers” on some of the decal options. Conclusion I’m an even happier bunny than I was before. I’ve always liked the Bronco, and this new option with the extended nose appeals to me, and should build into an excellent looking model that is crammed full of detail that will doubtless encourage new decal sheets into the market to cater for the many buyers. I also still can’t believe how cheap it is currently. You know you want one! Very highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  6. Basic Acrylic Colours Set (3010) ICM via Hannants Ltd ICM have long been a plastic model company that is well-known to most of us, but until recently they haven’t had their own paint range, which has now changed. There are 77 acrylic colours in the initial collection, plus three varnishes in matt, satin and gloss, all in the same 12ml plastic bottles. A conversion chart is available that will give you equivalents in AK, Tamiya, Humbrol, Gunze, Testors, RLM, RAL, FS, Revell, AK Real Color, and even Citadel paints, although there aren’t many direct cross-overs in that last one. This set is intended to be a foundation group to expand and vary your stock of ICM paint, and arrives in a card box with a header tab at one end, and inside are six 12ml plastic bottle with white plastic lids and a one-time tear-off safety ring. While they bear a passing resemblance to another brand of paint from ICM’s part of the world, they have stated categorically on Facebook that it is not a collaboration, and having now used both brands, they are indeed substantially different in every way other than being paint. The paint is undiluted, so will need thinning by between 40-60% with water or acrylic thinner for use with an airbrush, and they naturally have a semi-gloss finish that can be adjusted later by the use of varnishes, and are waterproof when dry like most acrylics. During my testing I used Ultimate Thinners, my go-to thinners for any acrylic paint, which helps keep the number of large bottles in my spray booth to a minimum. The paint comes out of the bottle quite thick and viscous, so it’s possible you’ll have to dilute for serious brush painting use although I used it neat during testing, so a small bottle will go a long way in either case. It sprays well when diluted, and like a lot of acrylics a light coat is best initially, then followed quickly after by heavier coats until you have the coverage you require. It dries quite quickly, and is touch-dry in 5-10 minutes in those long-gone summery 20-23oc temperatures, unless you’re in the antipodes as I write this. I have used them to create a number of spray-out cards and spoons for other sets in the range, and they both spray and brush very well, with little issue other than my inexpert application by brush. This set includes the following colours, which while they may seem garish on first inspection, are shades that can be very useful, especially the white and black for lightening and darkening many other colours: 1001 White 1002 Black 1003 Deep Yellow 1004 Deep Red 1005 Dark Blue 1006 Deep Green On the rear of the box are a number of suggestions for mixing of other colours using just the shades within this box, showing how your average artist can create a huge range of shades even from a limited palette, although they’re not hampered so much by the colour police that mutter persistently about Munsell values, argue over colours in black & white photos (eh?) and wave shade cards round like Neville Chamberlain. There are no such issues likely with these solid generic colours, although as usual I am confused by how light everyone else’s idea of dark green and blue is. That’s just a foible I’ve had since my art A Level days, and is unrelated to modelling. Don’t get me started on how limey grass green always seems to be! Conclusion ICM have created a very nice and economical paint system for their customers, which will increase their income stream and make picking up a suitably themed acrylic paint set along with your next ICM or other branded model more likely. We modellers do enjoy convenience. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  7. Vietnam US Airfield (DS4803) OV-10A Bronco O-2A Skymaster & US Marine Figures 1:48 ICM via Hannants Ltd. Vietnam was a long, drawn-out war that made use of the current forward observation aircraft of the day, which were the Cessna Skymaster that was at the latter end of its tenure, and the more modern OV-10A Bronco that had been introduced into US Marine and USAF service in the 1960s. They were often stationed at airfields behind the front line with crews and ground crew slumming it to a greater or lesser extent, depending on the size and recency of the base’s establishment. The Set This is a new combination set from ICM that contains their two recent kits of the Bronco and Skymaster, which have both filled a very long-standing hole in the 1:48 modelling universe. Now we have these two brand-new kits available to us, what could be better than having them both in the same box with the addition of a set of figures as the basis for a diorama of a Vietnam airbase from the conflict. The two kits are a direct lift from the standard boxes, even down to the decals, so we’ve taken the liberty of copying and pasting those reviews to save you from having to click around to find what’s what. The figures are at the bottom of the review, and there’s only one box that’s barely any larger than the largest of the three component items. Not only is it good for your modelling spirit, it’s also a great way to slim down the impact on the size of your stash. Rockwell OV-10A Bronco US Attack Aircraft (48300) The Bronco was conceived as a light attack, long loiter aircraft of modest size, enabling it to operate from roads close to the combat zone. As so often seems the case, the final design turned out to be much larger and heavier due to the requirements of the avionics and ejection seats, thus limiting its use to conventional airfields. The twin boom aircraft first flew in 1965 and was destined to serve with the US Navy, Airforce and Marines as a replacement for the Cessna O-1 Bird Dog & O-2 Skymaster. The Marines were the first to take the OV-10 into service as a forward air controller platform operating both night and day missions. Whilst the Bronco is best known for its operations in Vietnam, it also served in later conflicts as late as the Gulf War before being retired from US service in 1995. The USAF received Broncos in 1968 and deployed the aircraft in the Forward Air Control (FAC) role, using smoke laying methods initially, and later using laser targeting designators. Eventually it carried its own ground attack armament including rockets, machine guns and bombs that gave it the capability of Light Attack Aircraft, and made it a daunting prospect for the enemy to see overhead. Seven export contracts were signed with other foreign operators including Germany, Columbia and Indonesia, the very last of which will be leaving service in the near future after long service. The Kit This new tooling from ICM relieves us all of the ancient Testors kit with its legendarily incorrect wings and nacelle locations, which could only have been fixed with the help of a Paragon Designs set. This is a relief for this modeller, as there were also other blank areas that would have required some further work. Back to the matter in hand. A 100% new model from ICM, which arrives in one of their standard top opening boxes with the captive inner lid, and has ten sprues in grey styrene, one in clear, two sheets of decals and a glossy instruction booklet with spot colour inside and glossy colour profiles on the back pages. De-bagging the sprues reveals the detail is excellent, and the booms have raised as well as engraved rivets on their surface, which is just as it should be if you check out any walk arounds that get close enough to the aircraft to see them. The clear parts have been engineered so that they fit together as individual facets, and are crystal clear, allowing the modeller to see their hard work in the cockpit, providing they don’t put any gluey fingerprints on the glazing during the build. Overall, it looks like it will build into an excellent replica of the aircraft. Construction begins predictably with the cockpit, starting with the crew seats, of which there are two. The base of the seats are made from the curved lower and cushion, while the backs are formed from a shell with two cushions, one for the pilot’s back, the other for the headbox. The two elements are brought together and a small part is added to the headbox, then different rear detail and a launch rail are added to the rear of them both. There are colour call-outs as we go along, and two warning decals are supplied for the seats, although these are shown applied to the cushions, which seems odd, but having checked some references, that’s where they go. Every day’s a school day! The rear seat is glued to the cockpit floor which has a bulkhead and a shelf moulded into the rear, then side consoles are fixed onto the floor around the seat with control column on a lateral support, and a throttle quadrant that sits on top of a raised portion of the port console. A divider between the two seats is prepared with rudder pedals and other details, then has a choice of either of two instrument panels added atop the flat section, based on your decal choice. These are well detailed and have dial decals for each option. The divider is glued in place, then the front cockpit is made up starting with the seat again, but with a different set of launch rail parts with “antennae” to the side of the headbox. He too gets a control column and floor-mounted rudder pedals, after which the seat is bracketed by side consoles that have detailed tops, but no decals which is a shame. A bulkhead for within the footwell of the front cockpit is created from a number of parts, and fixed in place with the details facing forward, forming the rear bulkhead of the nose gear bay. The pilot gets a well-appointed instrument panel with coaming and decal, plus a number of small parts sitting on top of the coaming. This is glued in, and more details are added to the rear shelf in the shape of equipment boxes that probably have festive twinkling lights on the real thing, especially at Christmas. The cockpit is put to the side briefly while the crew nacelle is prepared with interior sidewall details, plus an internal frame that runs up the side of the canopy. You are advised to align this with the canopy sides, which have a shallow groove running top to bottom, so it would be an idea to glue the parts, then tape the canopy sides in place and align the frame with the groove, taping it in place until the glue sets. With the sides complete and painted internally, the cockpit can be secured inside and locked in place by bringing the two halves together. Providing you have painted the front of the crew nacelle, the nose gear bay is already complete and just needs the main strut, a diagonal support that goes far back under the canopy, and a pair of bay doors. The underside of the cockpit floor is then covered over by a well-detailed underside panel that has recesses ready for the stubby weapons pylons, and has a small central strake added toward the rear. Here it will be key to align the nacelle skins before the glue sets to avoid having to make good later and risk losing any of that lovely detail. The weapons “wings” need four holes drilling in their underside if you are going to hang weapons from them, then they are closed up around a small rectangular insert that the barrels later plug into, the wingtips are added, and each one has an insert applied to the leading edge that makes up the rest of the fairings for the weapons. These are glued into their recesses on the underside, and are fitted with shackles on the twin pylons on their undersides if you plan on using weapons. Another small nose gear door fits to the diagonal leg, and the four-part nose wheel with separate hub parts is first trapped between the yoke, which is then glued to the bottom of the nose strut along with the other half of the oleo scissor-link. I suspect this could be a weak point of the nose gear, so ensure you leave this to set up for a good while before attempting to put weight on it. The addition of the four gun barrels to the winglets and a couple of sensors completes the crew nacelle for now. The upper wing of the Bronco is a single full-width part that also has a section of the fuselage upper and the twin boom tops moulded-in, while the underside is in four sections. Before the two surfaces are joined, two spar sections are attached to the upper wing straddling the future location of the engine nacelles, and if you plan on adding wing pylons, there are a few holes to be drilled in the outer lower panel of the wings. All the flying surfaces are separate and the twin flap sections per side are made of three parts laminated together, while the ailerons are a single part each to which are added balances and trim actuators. When completed, the six flying surface sections are fitted to the cut-outs at the rear of the wing unit along with a pair of actuators for the ailerons, a pair of exhaust deflectors on top of the engine nacelles, and a large sensor blister at the centre-rear. The wing assembly is then mated to the crew gondola, and the canopy is begun. The blown windscreen that offers the pilot a good field of view has a sight fitted to the top centre before it is glued to the front of the cockpit, then has the clear canopy roof put in place, bridging the gap between the windscreen and cockpit rear. The two canopy sides are next, and these parts are each single pieces, which doesn’t give the modeller the opportunity to prop the front two sections in the open position without taking their life in their hands and cutting the parts with a razor saw or fine scriber and a lot of trepidation. No doubt an aftermarket company will step-in here. Building of the two nacelles begins with the gear bays, which starts with the making of the gear legs that have two main parts and a Y-shaped insert that traps the lower section in place but leaves it movable. Two more parts make up the suspension strut, which are also trapped in place by a V-shaped insert, and then glue is applied to the previously mobile joint, setting the correct angle for the leg permanently. It is glued to the stepped bay forward roof with a number of small parts, after which it is joined by the detailed sidewalls, rear bulkhead and another few parts to close over the rear of the roof and add more detail. The nacelle sides have a couple of holes drilled on each side, and these are joined around the bay assembly, capped off at the front by the intakes and propeller backing plate. Underneath, the triangular inserts with their many raised rivets are glued in carefully to avoid damaging that lovely detail, and two optional towel-rail antennae are glued into the holes on the sides of the nacelle. The two-part rudder is fixed to the tail, and an exhaust is made up from two halves, with baffles within. Align these carefully to minimise the join-line and check your references to get these right. A small intake is added to the side of the nacelle just forward of the exhaust. This process if carried out twice of course, in mirror-image so your Bronco doesn’t fly round in circles. The large horizontal elevator panel is made from top and bottom surfaces plus the elevator itself, and this is slotted into position between the nacelles as they are glued into place under the wings. You might need to grow another hand or two to make this happen, or get yourself one of those wonderful jigs like that of EBMA to help hold everything in place for this. Four optional shark-fin spoilers can be glued onto their corresponding slots in the top of each wing if you wish, or leave them in the box for a clean upper wing. The twin props have the three blades moulded as one, with a front and back boss, and take care to install the correct props on the nacelles, as the blades (and the turboprop engines) are handed, spinning in opposite directions to cancel out the effect of torque steer. A windscreen wiper and various sensor lumps are added around the fuselage, with more underneath, at which point you’ll notice that the main gear is without wheels. Each of these are made of a two-part wheel and two-part hub, with no weighting moulded-in, although that’s easily remedied by a quick sanding of a flat-spot on the bottom, just don’t overdo it so it looks like it needs more air. Fun with weapons is next, and this modeller thinks that the Bronco looks best when loaded for bear, as they say. There are two wing pylons on long supports to add to the outer wing panels, then it’s just a case of choosing which munitions you want to hang from them. There is a diagram showing which weapons can be fitted to which pylons, but if you’re aiming for realism, check your references to establish real-world load-outs for training and live-fire missions. In the box you get the following: 2 x LAU-33 twin rocket pods 2 x LAU-069A 21 rocket pods 2 x Mk.77 Incendiary bombs 2 x LAU-68 6 rocket pods 2 x 150gal fuel tanks 2 x Mk.81 Lowdrag iron bombs with optional daisy-cutter fuse 2 x Mk.81 Snakeye iron bombs with optional daisy-cutter fuse 2 x Mk.82 Snakeye iron bombs with optional daisy-cutter fuse 2 x Mk.82 Lowdrag iron bombs with optional daisy-cutter fuse 2 x LAU-10A 4 rocket pods The detail of the individual weapons is excellent, with multiple parts for fins, fuses and rockets, and only the seamlines to clean up along the way. The canopy is about as clear as can be, so it’s going to be important to mask it up before you inadvertently ruin the startling clarity. Although masks aren’t included in the box, there is a handy template near the back of the instructions that you can place tape on and cut out masks for your use on the model. Each section is numbered and there is another drawing showing their location on the canopy. Very handy! Markings There are five options in the rear of the instructions in various shades of grey and camouflage green, and there’s also a new paint set from ICM themselves that gives you all the shades you’ll need to paint the majority of the airframe as depicted in this boxing. You can read about that in a later review that we’ll link back once we’ve had chance to spray them out. From the box you can build one of the following: OV-10A 155471 Light Attack Sqn. 4 (VAL-4), ‘Black Ponies’, Binh Thuy, 1971 OV-10A 155456 Marine Observation Sqn. 6 (VMO-6), Quang Tri, 1969 OV-10A 67-14649, 20th Tactical Air Support Sqn., Da Nang, 1972 OV-10A 155416 Marine Observation Sqn. 2 (VMO-2), Da Nang, 1969 OV-10A 155416 Marine Observation Sqn. 2 (VMO-2), Da Nang, 1970 The 4th and 5th options depict the same airframe at different periods, which possibly had light grey wings earlier in its career, which was later painted green on the topside, and may have been painted a lighter or darker grey on the underside. The profiles give you the option and leave it up to you. Decals are printed by ICM’s usual partners, with good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. The weapons all have stencils to apply, which are shown next to each profile, as their colours varied over time. There are also rear and white tip decals for the props, and the large wide T-shapes on the upper wings are also included as decals, as are the tapered exhaust gas “hiders” on some of the decal options. Cessna O-2A Skymaster (48290) The O-2A Skymaster replaced the equally well-loved O-1 Bird-dog in the Observation role, adding Psy-Ops and light attack by the fitting additional equipment. It was developed from Cessna’s Type 337 Super Skymaster, and had additional windows in the pilot's side added to improve vision, the superfluous rear seats were replaced with racks of equipment including military radio gear, and hard-points were added under the wings. The twin props at either end of the stubby airframe gave it an element of redundancy in case of enemy fire, which also necessitated the installation of foam into the fuel tanks to help reduce the likelihood of leaks and subsequent fires bringing down the aircraft. With all the extra weight it was slower than the civilian version, but that was considered acceptable due to the crew and airframe protections it afforded. Like the Bird-dog it replaced, it spent a lot of time in Vietnam where it was used extensively in the role of Forward Air Control (FAC) and designated O-2B (31 converted Type 337 airframes) with the installation of loudspeakers to attempt to psychologically batter the enemy with recorded messages and leaflet drops that clearly didn’t have much effect other than supplying them with toilet paper in hindsight. Less than 200 were made in military form straight from the production line, and they continued service after Vietnam until the 80s, when some were sold on and others used in firefighting duties in the US, while others were flown in the nascent war against drugs in central America. The Kit This is a completely new tool from ICM, and I’m personally very happy to see it, as I have a soft-spot for the Skymaster after building an old Airfix Dogfight Double with a Mig-15 in 1:72 as a kid. There have been kits in 1:48 before, but nothing that could be called truly modern for a long time, so I doubt I’m alone. We’ve had a bigger scale kit within the last year, but this is the one for me and all those 1:48 modellers out there. It arrives in a modest-sized top-opening box with ICM’s usual captive inner flap, with two large sprues that fit snugly within the tray in their foil bag. Within that bag is a set of clear parts, and hidden inside the instruction booklet (which has a new more modern design) is the smallish decal sheet for the four decal options. Construction begins with the equipment racks in the aft fuselage, which are built up onto the bulkhead, then the fuselage halves are prepped with clear windows from the inside, plus an insert at the rear. The top surface of the engine is made up with exhausts and the front fairing that supports the prop axle, which is inserted but not glued. Under this the nose landing-gear bay is fitted with a firewall bulkhead that has the twin rudder pedals inserted before it is mounted into the starboard fuselage half. With those assemblies out of the way, the cockpit fittings are begun. The seats for the pilots have two U-shaped supports and a single piece back each, then the seats and instrument panel (with decals for instruments) with moulded-in centre console and control yokes added are offered up to the spartan cockpit floor, which slides under the already inserted electronics rack. The port fuselage half is decorated with a couple of M16 rifles and an arm-rest, then is joined with the other half taking care to insert at least 10 grams of nose-weight before you do. The aft fuselage has a complex shape that is moulded as a separate insert and is ready for a two-blade prop thanks to its axle and backstop part, and has two moulded-in exhausts under it. The nose gear leg was trapped in the wheel bay during assembly, and the two out-rigger main legs are a single C-shaped part that is trapped in a groove in the fuselage with a set of additional panels over it, making for a strong join, although some enterprising soul will probably make a metal one. Up front the big curved windscreen has a small instrument fitted into a hole in the middle, then is glued in place and the front prop is glued carefully to the axle if you want to leave it spinning. The wings are a single-span part on the top, and has the majority of the roof of the fuselage moulded-in, plus two top windows inserted from inside before fitting. The engine intake is made up from three parts including a separate lip, and fits to the aft of the roof, butting up against the rest of the fairing moulded into the fuselage, with a towel-rail and a small forest of blade antennae attached to the various depressions left for them. The wing undersides are attached after the booms are made up, and you should drill out the flashed-over holes for the pylons if you plan on fitting them. The booms are joined by the wide elevator that is made up of three parts including a poseable flying surface. The two booms are also two parts, and also have separate rudders, which are each single mouldings, and can be posed as you see fit. The instructions show the elevator glued to the booms before they are attached to the wings, but this is probably best done at the same time to ensure a good fit and correct alignment, then the lower wing panels mentioned earlier are glued in, trapping the sponson ends between the surfaces. Front gear door, ailerons and wing bracing struts with their fairings are next, then the main wheels, more antennae, and two raised trunks that run along the main fuselage underside are all fitted in place, plus the four identical pylons if you wish, along with their anti-sway braces. You have a choice of using four rocket pods on all pylons, or rocket pods on the outer stations and SUU-11/A Minigun Pods on the inner pylons. The last page of the instructions shows the placement of the masks that you are given a printed template for on the page, so you can make masks by placing the tape over the relevant template and either marking the tape and cut it later, or cut it in situ. It’s up to you whether you use the templates, but they’re there if you do. Markings There are four decal options from the box, and three of them are the more usual white/grey scheme that most people know. The last option is an all-black airframe, which gives the aircraft a more sinister look. From the box you can build one of the following: No unit details or timescale is given on the profiles, but you get full four view pictures and can use the tail-codes if you want to find out a little more about your choice of aircraft. The decal printers are anonymous, but they are in good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. The instrument panel decals are also very crisp and clear. US Marine Figures This new set is custom designed for their new 1:48 scale Vietnam era kits, but can just as easily be used elsewhere. There are two pilots getting ready for flying, one carrying as helmet the other wearing a flat cap. There is an officer figure (possibly maintenance) in tan uniform, plus two ground crew in T-shirts, fatigues and high boots. The uniforms and equipment are Vietnam era, and the sculpting is of course up to ICM's usual high standards. Conclusion I’m a happy bunny times two (and some figures). I’ve always liked both the Bronco and the Skymaster, and these new toolings are excellent looking models that are crammed full of detail that will doubtless encourage new decal sheets into the market to cater for the many buyers. The launch of the paint sets is a clever move, encouraging modellers to try their own new(ish) paint system. You know you want to! Very highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  8. BM-13-16 on G7107 Chassis with Soviet Crew (35596) 1:35 ICM via Hannants Ltd The Chevrolet G506 truck formed the basis of a range of 4x4 load-carrying vehicles that were capable of carrying up to 1.5 tonnes of cargo or equipment. They were initially made under the 4100 code, then moved to the 7100 range, and usually had a standard enclosed cab, with a 3.9L straight-6 engine under the bonnet, and a four-speed “crash” (non-syncromesh) gearbox putting down a little over 80hp through all four wheels. It rapidly became the Allies’ standard light truck, and served in substantial quantities with the Allies in the West, the Soviets in the East, and the forces fighting Japan in the Far East. There were a lot of variants, some in US Army service, others in USAAF service, with almost 50,000 of two specific types, the G7107 and G7117 sent over to the Soviets under the Lend/Lease program. The Soviets modified a number of the chassis and cab units to carry Katyusha rockets on a stripped-down flatbed. The rockets were a huge worry for the Nazis as they were forced to withdraw from their former conquests, and although their accuracy wasn’t renowned, they put the wind up anyone in the general target area, who couldn’t tell whether the rockets would fall on them or someone 100m away. Their distinctive howling roar was another psychological weapon, giving the Germans an indication that there were a torrent of lethal rockets heading for them. The stripped-down chassis of this particular installation gave the vehicle a rather lashed-together, Mad Max look. The Kit This is a reboxing with additional parts of a brand-new tooling from ICM, and is the latest kit of a range that is inbound to your favourite model shop very soon. It’s an ICM kit, and a full interior kit too, with engine cab and load area all included along with some very nice moulding and detail, particularly in the chunky tyres and the four crew figures. It arrives in one of ICM’s medium-sized top-opening boxes with the usual captive inner flap, and inside are ten sprues in grey styrene, a clear sprue, tiny decal sheet and glossy instruction booklet with colour (well, mostly green) profiles on the rear pages. Construction begins with the new ladder chassis, which has leaf-springs fore and aft, cross-braces and rear towing eye fitted to create the structure, then has the rear bumper irons, fuel tank, transfer casing and front axle installed, before the engine is built up based on the straight six-cylinder block, with carburettor, dynamo and transmission added, plus the pulleys and fan at the front, and a short drive-shaft at the rear that links to the transfer box in the middle of the chassis. The rear axle is made up and fitted with another drive-shaft, while the front axle gets the steering arm installed, which keeps the twin ball-jointed hubs pointing in the same direction, providing you’ve not been over-enthusiastic with the glue. The exhaust and its manifold slip into the underside of the chassis from below, and the battery box attaches to the outside of the ladder chassis next to a pair of tread-plated steps, then from the left of the engine, the air box and intake are attached to finish it off. The crew cab is next, beginning with the dashboard that inserts in the front bulkhead along with an overhead panel, then is joined with the cab floor and decked out with a pair of levers, gear stick and hand-brake on the floor, three foot-pedals and the steering wheel on a long column that slides through a hole in the diagonal floor section in front of the pedals. The driver and co-driver share a bench seat that is made up from back, cushion and a C-shaped spacer surrounding the bottom that fits into the rear of the cab and has the back wall with small ovalised window, then the roof is fitted, after which the doors are made up with handles, winders and glazing, fitting within the frame in the open or closed position. On the front of the firewall a vent is glued to the scuttle panel, and two reservoirs are attached, then the cab is mated to the chassis along with a couple of additional engine ancillaries and linkages to the front axle. The radiator is laminated from core, surround and tin-work, with a bezel fitted to the front and the assembly is then applied to the front of the engine, attaching to the chassis and input/outlet hoses that are already there. The cowling sides and front fenders are installed to permit the front grille to be attached, plus the bonnet and a large front bumper iron that runs full width, and is quite literally a girder. Behind the cab a spare tyre is placed on a bracket near the exhaust, and It’s time for the wheels to be made up, with singles at the front, each made from two halves each, and twin wheels at the rear axle, put together with two two-part wheels each, and two hub parts added to the finished pair. Each wheel slips over its respective axle, and is secured in place by a central cap. The windscreen is glued in place and door handles with external hinges are attached to the exterior, with more work done later in the build. On the original kit the truck bed would now be made up (and some of the parts for it are left on the sprues), for this boxing though the rocket launching rails and their elevating apparatus are constructed. The eight rails are built up from three parts each and are then threaded together on three cross members. The modeller will need to line up the spacing of these, and luckily ICM provide a jig for this so you can fix their positions with a little glue. After the rails are sorted the fairly complex support gear is put together, this can be in either the raised or lowered position by exchanging short supports for longer parts. 16 rockets can then be added to the rails (8 on the upper side, and 8 on the lower). The base for the launching system is then built up from three large parts that includes a small degree of rotation capability for fine-tuning the aiming of this blunderbuss of a weapon. It is attached to the back of the truck with a choice of two styles of rear fenders before the ancillary parts and launch rails can then be added on. Various parts are added behind the cab, including power take-off for the rotation mechanism, and a central boss is fixed to the support plate along with more brackets and hinges for the launch frame, then two ground stabilisers are then added to the chassis rear. The launch rails and their frame are put in position on the rear of the chassis, and an optional set of armour panels are made up and fixed over the crew cab to protect them from heat damage during launch. The frame is fixed in place with a rod and clamps, then to finish off the vehicle lights are added behind the protective frames, with a rear-view mirror on a long stalk. Manual adjustment controls are glued to the left side of the vehicle before you can relax and reach for the Russian Green paint. Figures (35648) All four figures are on one sprue with a separate instruction booklet and product code. They are moulded in ICM’s by now familiar lifelike style, with lots of detail, realistic poses and sculpting, and including a number of weapons to sling over their shoulders. Three of the figures are shown loading rockets onto the back of the rails, while the fourth can either be their commander watching over the process, or with the tweak of his arm, he can be propping up the next rocket for loading with one of his hands, as can be seen in the picture below. Markings There are two decal options on the small sheet, which differ only by a pair of stencils on the doors. From the box you can build one of the following: 84th Red Banner Novozybkovsky Guards Mortar Regiment, November 1943 Unknown Guards Mortar Regiment, 1943 The decals are printed by ICM’s usual partners, and are crisp and clear, with no registration to speak about other than on the instrument dials, which are nicely done. Conclusion A cool-looking lend/lease home-grown lash-up Katyusha with a full compliment of noisy and dangerous rockets. Super detail and a choice of green, green or green for the paint job. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  9. Laffly V15T French Artillery Tractor (35570) 1:35 ICM via Hannants Ltd The Laffly V15T was a particularly niche entry into the French Artillery Tractor roster, with only 100 being made before production ceased at Laffly to be taken over by another company. The type saw limited service in the French army pulling the outmoded 25mm anti-tank guns, and after capitulation, in service with the Wehrmacht as transport or radio wagons. The unusual aspect of this vehicle was the four apparently ‘vestigial’ wheels on axles spurring off the chassis rails that were intended to increase the off-road abilities of the type. When viewed from the side however, the small balloon-wheels appear to be above the level of the main axles, so whether this actually worked anywhere but in the deepest ruts is another matter. We don’t see them on modern vehicles, so I’m guessing they were more trouble than they were worth. The Kit This is a brand-new tool from ICM, and I imagine we’ll be seeing a combination boxing with a 25mm pop-gun and crew, and probably another in German service. It’s typical of modern ICM in that it is well-stocked with detail, and arrives in their standard small top-opening box with captive inner lid. There are seven sprues of grey styrene inside, plus a clear sprue, four flexible black tyres, a small decal sheet and the glossy-covered instruction booklet with spot colour and colour profiles to the rear. It’s a full interior kit including engine, chassis and crew compartment, so there are plenty of parts to get your glue on. Construction begins with the chassis, with an option to remove the rounded rear-end where the towing hitch attaches, which is cut off easily with a scalpel or razor saw using the red outlined section on the drawings as a guide. A number of cross-braces are added, and a jig is placed under the inverted chassis onto which the rear suspension arms are laid, so that they set up at the correct angle, taking care not to glue the arms to the jig. If you have left the rear section on the chassis, the towing eye and other parts are glued in place, then the various leaf springs, ancillary axles and other suspension/steering parts are attached to the sides, with a sizeable transfer box and twin drive-shafts placed in the centre facing aft. The front axles are made up and glued in place with twin springs above them on the chassis, two more drive-shafts pointing forward, and more suspension/steering parts for the small wheels. The little balloon tyres are each made from two halves each, and four are created to affix to the small axles that project from the chassis rails, the front one of which has some limited steering capability. The 4-cylinder 2.3L petrol engine is next to be built, beginning with the two-part block and adding the sump, timing pulleys, transmission, exhaust manifold and finely-moulded cooling fan, plus other ancillaries that should result in a highly detailed rendition that just needs some HT-wires and sympathetic painting to complete. It is laid into the centre-front of the chassis along with the airbox and intake hosing, then is bracketed by a pair of tapered inserts that fill the gap between the block and the chassis rails. The main cab is based on the shaped floorpan, with sides, aft bulkhead and some internal structures added along the way, which later form ammunition storage bunkers around the sides of the rear portion. The front crew have a seat each with separate backs, and there is another optional wider seat in the middle of the rear compartment, which installs over a moulded clamshell door with pull-handles. A set of driver controls are added to the left front of the body, then a firewall with pedals, a breadbin-like compartment and other small parts is fixed to the front of the body, with a steering column and wheel added after the bodyshell is fixed to the chassis. The dashboard with dial decal is added over the wheel, and the area is covered over with a curved scuttle panel. In the rear compartment, the tops to the stowage boxes are fitted, and these have the individual sections and their handles moulded-in. Returning to the engine compartment, the steering column is extended into the lower chassis and a horn is fixed to the trim panels, then the three-part radiator is assembled and glued to the front of the vehicle, defining the engine bay. A loop of hosing joins the radiator to the engine, and the cowling panels are closed over the compartment, although you have the option to leave them open if you wish. Some small parts are added to the lower edges of the cowlings, which has crisply detailed louvers moulded-in. A pair of curved front wings are glued to the lower body over the wheels, and each of the four main wheels have a brake drum part added to the end of each axle, after which the wheels themselves are made from two hub halves that mate inside the hollow tyres and glue to the axles, allowing the vehicle to stand on its own wheels. At the rear, an axe and shovel are fixed to the bulkhead with a stop sign and the towing hook, a folded tilt is added to the rear, and the windscreen is made up from a frame and two individual clear panes. A trio of rolled-up canvas anti-splatter covers are pinned to the fronts of the door apertures and the two headlights have their clear lenses glued on before they are put in place on their mounts next to the tiny wheels at the front. The final parts are a front number plate board and an optional square unit plaque on the left front wing. What a weird little truck! Markings There are two decal options provided on the sheet, and they’re both painted in a US Green shade, despite being French. From the box you can build one of the following: Light Mechanised Brigade Anti-Tank Squadron, France, early 1940 France, Summer, 1940 The decals are printed by ICM’s usual partners, and consist of dials, number plates and a few other small decals, with good register, sharpness and good solid colours. Paint Clever folks that they are, ICM have created a box of paints from their new range that are specific to this kit. This set arrives in a card box with a header tab at one end, and inside are six 12ml plastic bottles with white plastic lids and a one-time tear-off safety ring. While they bear a passing resemblance to another brand of paint from ICM’s neighbourhood, they have stated categorically on Facebook that it is not a collaboration, and having now used both brands, they are indeed substantially different in look and use. The paint is undiluted, so will need thinning by between 40-60% with water or acrylic thinner for use with an airbrush, and they naturally have a semi-gloss finish that can be adjusted by the use of varnishes, and are waterproof when dry. Inside the box are the following colours: 1072 US Dark Green 1042 Pale Sand 1052 Hull Red 1039 Rubber Black 1027 Gun Metal 2001 Matt Varnish If you would like to see an in-depth review and spray/brush-out of the paint system, check out our recent review of the set that they made for their new 1:48 OV-10A Bronco, which you can find here Conclusion Until this kit arrived, I had no clue that the type existed, and it’s a curious-looking beast that’s endearing for its unusual shape and design. Detail is excellent, and if you don’t fancy the options on the sheet, a little research will probably turn up some alternative schemes. The paint set is a quick and easy way to get things painted up the correct colour, as well as being quite pocket-friendly into the bargain. Highly recommended. Available in the UK from importers H G Hannants Ltd. Laffly V15T (35570) Paint Set (3009) Review sample courtesy of
  10. BM-13-16 on G7107 Base (35595) 1:35 ICM via Hannants The Chevrolet G506 truck formed the basis of a range of 4x4 load-carrying vehicles that were capable of carrying up to 1.5 tonnes of cargo or equipment. They were initially made under the 4100 code, then moved to the 7100 range, and usually had a standard enclosed cab, with a 3.9L straight-6 engine under the bonnet, and a four-speed “crash” (non-syncromesh) gearbox putting down a little over 80hp through all four wheels. It rapidly became the Allies’ standard light truck, and served in substantial quantities with the Allies in the West, the Soviets in the East, and the forces fighting Japan in the Far East. There were a lot of variants, some in US Army service, others in USAAF service, with almost 50,000 of two specific types, the G7107 and G7117 sent over to the Soviets under the Lend/Lease program. The Soviets modified a number of the chassis and cab units to carry Katyusha rockets on a stripped-down flatbed. The rockets were a huge worry for the Nazis as they were forced to withdraw from their former conquests, and although their accuracy wasn’t renowned, they put the wind up anyone in the general target area, who couldn’t tell whether the rockets would fall on them or someone 100m away. Their distinctive howling roar was another psychological weapon, giving the Germans an indication that there were a torrent of lethal rockets heading for them. The stripped-down chassis of this particular installation gave the vehicle a rather lashed-together, Mad Max look. The Kit This is a reboxing with additional parts of a brand-new tooling from ICM, and is the latest kit of a range that is inbound to your favourite model shop very soon. It’s an ICM kit, and a full interior kit too, with engine cab and load area all included along with some very nice moulding and detail, particularly in the chunky tyres. It arrives in one of ICM’s medium-sized top-opening boxes with the usual captive inner flap, and inside are ten sprues in grey styrene, a clear sprue, tiny decal sheet and glossy instruction booklet with colour (well, mostly green) profiles on the rear pages. Construction begins with the new ladder chassis, which has leaf-springs fore and aft, cross-braces and rear towing eye fitted to create the structure, then has the rear bumper irons, fuel tank, transfer casing and front axle installed, before the engine is built up based on the straight six-cylinder block, with carburettor, dynamo and transmission added, plus the pulleys and fan at the front, and a short drive-shaft at the rear that links to the transfer box in the middle of the chassis. The rear axle is made up and fitted with another drive-shaft, while the front axle gets the steering arm installed, which keeps the twin ball-jointed hubs pointing in the same direction, providing you’ve not been over-enthusiastic with the glue. The exhaust and its manifold slip into the underside of the chassis from below, and the battery box attaches to the outside of the ladder chassis next to a pair of tread-plated steps, then from the left of the engine, the air box and intake are attached to finish it off. The crew cab is next, beginning with the dashboard that inserts in the front bulkhead along with an overhead panel, then is joined with the cab floor and decked out with a pair of levers, gear stick and hand-brake on the floor, three foot pedals and the steering wheel on a long column that slides through a hole in the diagonal floor section in front of the pedals. The driver and co-driver share a bench seat that is made up from back, cushion and a C-shaped spacer surrounding the bottom that fits into the rear of the cab and has the back wall with small ovalised window, then the roof is fitted, after which the doors are made up with handles, winders and glazing, fitting within the frame in the open or closed position. On the front of the firewall a vent is glued to the scuttle panel, and two reservoirs are attached, then the cab is mated to the chassis along with a couple of additional engine ancillaries and linkages to the front axle. The radiator is laminated from core, surround and tin-work, with a bezel fitted to the front and the assembly is then applied to the front of the engine, attaching to the chassis and input/outlet hoses that are already there. The cowling sides and front fenders are installed to permit the front grille to be attached, plus the bonnet and a large front bumper iron that runs full width, and is quite literally a girder. Behind the cab a spare tyre is placed on a bracket near the exhaust, and It’s time for the wheels to be made up, with singles at the front, each made from two halves each, and twin wheels at the rear axle, put together with two two-part wheels each, and two hub parts added to the finished pair. Each wheel slips over its respective axle, and is secured in place by a central cap. The windscreen is glued in place and door handles with external hinges are attached to the exterior, with more work done later in the build. On the original kit the truck bed would now be made up (and some of the parts for it are left on the sprues), for this boxing though the rocket launching rails and their elevating apparatus are constructed. The eight rails are built up from three parts each and are then threaded together on three cross members. The modeller will need to line up the spacing of these, and luckily ICM provide a jig for this so you can fix their positions with a little glue. After the rails are sorted the fairly complex support gear is put together, this can be in either the raised or lowered position by exchanging short supports for longer parts. 16 rockets can then be added to the rails (8 on the upper side, and 8 on the lower). The base for the launching system is then built up from three large parts that includes a small degree of rotation capability for fine-tuning the aiming of this blunderbuss of a weapon. It is attached to the back of the truck with a choice of two styles of rear fenders before the ancillary parts and launch rails can then be added on. Various parts are added behind the cab, including power take-off for the rotation mechanism, and a central boss is fixed to the support plate along with more brackets and hinges for the launch frame, then two ground stabilisers are then added to the chassis rear. The launch rails and their frame are put in position on the rear of the chassis, and an optional set of armour panels are made up and fixed over the crew cab to protect them from heat damage during launch. The frame is fixed in place with a rod and clamps, then to finish off the vehicle lights are added behind the protective frames, with a rear-view mirror on a long stalk. Manual adjustment controls are glued to the left side of the vehicle before you can relax and reach for the Russian Green paint. Markings There are two decal options on the small sheet, which differ only by a pair of stencils on the doors. From the box you can build one of the following: 84th Red Banner Novozybkovsky Guards Mortar Regiment, November 1943 Unknown Guards Mortar Regiment, 1943 The decals are printed by ICM’s usual partners, and are crisp and clear, with no registration to speak about other than on the instrument dials, which are nicely done. Conclusion A cool-looking lend/lease home-grown lash-up Katyusha with a full compliment of noisy and dangerous rockets. Super detail and a choice of green, green or green for the paint job. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  11. OV-10A Bronco Acrylic Paint Set (3008) ICM via Hannants ICM have recently released their own brand of acrylic paints on the market, and are creating some kit specific sets to go with their major releases, of which this is one. The set arrives in a cardboard box with six screw-capped bottles inside, each containing 12ml of paint. The bottles are clear Polypropylene, and are capped with cylindrical tops with knurled sides, and a one-time security seal that you break on first opening. A label on the side gives you basic information about the colour and code, a little information regarding application in English and Ukrainian and a bar-code. This set provides the major colours to assist you in painting your brand-new OV-10A Bronco in 1:48 from ICM themselves, and you will find the following colours in the box: 1071 Camouflage Gren 1031 Warm Grey 1032 Blue Grey 1026 Oily Steel 1002 Black 2002 Satin Varnish The paint is thick in the bottle, with plenty of headroom between the surface of the paint and the lip of the neck. I dropped a glass stirring ball into each bottle, and they took a few seconds to disappear beneath the surface, indicating their viscosity. Airbrush I used Ultimate Acrylic Thinners to dilute the paint to spray through my Gunze PS770 airbrush, which has a 0.18 needle chucked in. The paint dilutes well once it has been mixed thoroughly, and sprays well through my airbrush, which has a smaller than usual needle that is a good test of the finesse of the pigment grind of any brand, some of which don’t spray very well though anything less than a 0.3mm needle. There were no problems with blockages at all, and the coverage was excellent after my usual ad hoc dilution method, which was probably nowhere near the 40-60% thinners or water that’s suggested on the pack. The photo below shows the five actual colours sprayed out onto plastic spoons that have been prepared by buffing with a fine grade flexible sanding stick of the kind you use in the penultimate step before buffing to a shine. As the paint dried it obtained a highly matt finish with the exception of the Oily Steel paint, which is clearly semi-gloss. The Satin Varnish also worked very well diluted with water, sprayed over the spoons that were also partially taped up to perform two functions at once. The satin patina that resulted is exactly what was expected, and the tape lifted no paint at all, despite my best efforts to do so. Bear in mind that the spoons were prepped by a buff with a very fine sanding sponge to give them a chance of adhesion. There was very little damage to the cured paint from scraping my fingernails across the surface too. There were track-marks of course, but no lifting of paint at all. Paint Brush As usual I used a #6 synthetic filbert brush from AMMO, which has slightly curved edges to keep tramlines in the paint to a minimum. The colours brushed extremely well with one exception, which was the Oily Steel. It appeared to pull up when over-brushed during application, despite the surface remaining wet, which resulted in the appearance of tiny fibre-like structures in the paint that led to a gritty finish that was also translucent even after two coats, obtaining a rather lumpy opaqueness after three coats. The rest of the colours covered perfectly after two coats with minimal brush marks visible, which was thoroughly impressive to this long-lapsed brush painter, and some were almost completely opaque after one coat, save for the fact that they were laid down over a white surface. The undiluted Satin Varnish brushed out well over the matt surface of the brush painted spoon undersides, and I had to leave it until the next day to have my evening meal. The satin effect was excellent again, and the paint was tough enough to stand up to my fingernail test without lifting, although you can’t avoid leaving tracks across the surface due to the deposition of tiny particles from your fingernail on the surface. Conclusion The paints were excellent through the airbrush with nothing in the way of drama during the testing process, including the Oily Steel and Satin Varnish. The solid colours also brushed out very well, as did the varnish, but what happened to the Oily Steel is a mystery to me at this stage, possibly a bad mix, or some other oddity peculiar to my bottle or batch. There is a little less paint in the bottles than some brands, but a shade more than others, so it’s about average. That is more than offset by the very reasonable price they’re asking for the set, even at RRP. Highly recommended. Available in the UK from importers H G Hannants Ltd. Currently on back-order, however. Review sample courtesy of
  12. USAAF Bomber Pilots & Ground Crew 1944-45 (48088) 1:48 ICM via Hannants With HKM bringing out a new 1:48 B-17 Flying Fortress, this new set from ICM is timed rather well, which is more than likely no coincidence. It arrives in ICM’s usual top-opening box with captive inner lid, although it’s a smaller one than usual. Inside is a single sprue of grey styrene and a glossy instruction sheet with spot colour profiles of the five figures that can be found on the sprue in parts. There are three flight crew members, two of which are dressed for flight, complete with their life jackets and harnesses, while the third crewman is wearing just his olive drabs and a leather flying jacket with an officer’s cap and his hands in his pockets. Two of them have large kit bags at their feet, while the guy in the peaked cap is carrying a parachute pack in one hand and a glove in his other. The two ground crew figures are dressed in overalls, one kneeling down with a spanner pack to his side, while the other is reaching up with what looks like a screwdriver in one hand. Sculpting is excellent, with an abundance of crisp detail throughout, even down to the sewn-in ribbing on the underside of the crewman’s turned up cap bill. The poses, breakdown of parts and fabric drape is also beyond reproach, and they should build up into an excellent set of figures to dot around the US bomber of your choice. Conclusion Adding some figures to a model, diorama or vignette gives scale as well as a human dimension, and this set will provide just that with the addition of some judiciously applied painting, which is key. Very highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  13. OV-10A Bronco US Attack Aircraft (48300) 1:48 ICM via Hannants The Bronco was conceived as a light attack, long loiter aircraft of modest size, enabling it to operate from roads close to the combat zone. As so often seems the case, the final design turned out to be much larger and heavier due to the requirements of the avionics and ejection seats, thus limiting its use to conventional airfields. The twin boom aircraft first flew in 1965 and was destined to serve with the US Navy, Airforce and Marines as a replacement for the Cessna O-1 Bird Dog & O-2 Skymaster. The Marines were the first to take the OV-10 into service as a forward air controller platform operating both night and day missions. Whilst the Bronco is best known for its operations in Vietnam, it also served in later conflicts as late as the Gulf War before being retired from US service in 1995. The USAF received Broncos in 1968 and deployed the aircraft in the Forward Air Control (FAC) role, using smoke laying methods initially, and later using laser targeting designators. Eventually it carried its own ground attack armament including rockets, machine guns and bombs that gave it the capability of Light Attack Aircraft, and made it a daunting prospect for the enemy to see overhead. Seven export contracts were signed with other foreign operators including Germany, Columbia and Indonesia, the very last of which will be leaving service in the near future after long service. The Kit This new tooling from ICM relieves us all of the ancient Testors kit with its legendarily incorrect wings and nacelle locations, which could only have been fixed with the help of a Paragon Designs set. This is a relief for this modeller, as there were also other blank areas that would have required some further work. Back to the matter in hand. A 100% new model from ICM, which arrives in one of their standard top opening boxes with the captive inner lid, and has ten sprues in grey styrene, one in clear, two sheets of decals and a glossy instruction booklet with spot colour inside and glossy colour profiles on the back pages. De-bagging the sprues reveals the detail is excellent, and the booms have raised as well as engraved rivets on their surface, which is just as it should be if you check out any walk arounds that get close enough to the aircraft to see them. The clear parts have been engineered so that they fit together as individual facets, and are crystal clear, allowing the modeller to see their hard work in the cockpit, providing they don’t put any gluey fingerprints on the glazing during the build. Overall, it looks like it will build into an excellent replica of the aircraft. Construction begins predictably with the cockpit, starting with the crew seats, of which there are two. The base of the seats are made from the curved lower and cushion, while the backs are formed from a shell with two cushions, one for the pilot’s back, the other for the headbox. The two elements are brought together and a small part is added to the headbox, then different rear detail and a launch rail are added to the rear of them both. There are colour call-outs as we go along, and two warning decals are supplied for the seats, although these are shown applied to the cushions, which seems odd, but having checked some references, that’s where they go. Every day’s a school day! The rear seat is glued to the cockpit floor which has a bulkhead and a shelf moulded into the rear, then side consoles are fixed onto the floor around the seat with control column on a lateral support, and a throttle quadrant that sits on top of a raised portion of the port console. A divider between the two seats is prepared with rudder pedals and other details, then has a choice of either of two instrument panels added atop the flat section, based on your decal choice. These are well detailed and have dial decals for each option. The divider is glued in place, then the front cockpit is made up starting with the seat again, but with a different set of launch rail parts with “antennae” to the side of the headbox. He too gets a control column and floor-mounted rudder pedals, after which the seat is bracketed by side consoles that have detailed tops, but no decals which is a shame. A bulkhead for within the footwell of the front cockpit is created from a number of parts, and fixed in place with the details facing forward, forming the rear bulkhead of the nose gear bay. The pilot gets a well-appointed instrument panel with coaming and decal, plus a number of small parts sitting on top of the coaming. This is glued in, and more details are added to the rear shelf in the shape of equipment boxes that probably have festive twinkling lights on the real thing, especially at Christmas. The cockpit is put to the side briefly while the crew nacelle is prepared with interior sidewall details, plus an internal frame that runs up the side of the canopy. You are advised to align this with the canopy sides, which have a shallow groove running top to bottom, so it would be an idea to glue the parts, then tape the canopy sides in place and align the frame with the groove, taping it in place until the glue sets. With the sides complete and painted internally, the cockpit can be secured inside and locked in place by bringing the two halves together. Providing you have painted the front of the crew nacelle, the nose gear bay is already complete and just needs the main strut, a diagonal support that goes far back under the canopy, and a pair of bay doors. The underside of the cockpit floor is then covered over by a well-detailed underside panel that has recesses ready for the stubby weapons pylons, and has a small central strake added toward the rear. Here it will be key to align the nacelle skins before the glue sets to avoid having to make good later and risk losing any of that lovely detail. The weapons “wings” need four holes drilling in their underside if you are going to hang weapons from them, then they are closed up around a small rectangular insert that the barrels later plug into, the wingtips are added, and each one has an insert applied to the leading edge that makes up the rest of the fairings for the weapons. These are glued into their recesses on the underside, and are fitted with shackles on the twin pylons on their undersides if you plan on using weapons. Another small nose gear door fits to the diagonal leg, and the four-part nose wheel with separate hub parts is first trapped between the yoke, which is then glued to the bottom of the nose strut along with the other half of the oleo scissor-link. I suspect this could be a weak point of the nose gear, so ensure you leave this to set up for a good while before attempting to put weight on it. The addition of the four gun barrels to the winglets and a couple of sensors completes the crew nacelle for now. The upper wing of the Bronco is a single full-width part that also has a section of the fuselage upper and the twin boom tops moulded-in, while the underside is in four sections. Before the two surfaces are joined, two spar sections are attached to the upper wing straddling the future location of the engine nacelles, and if you plan on adding wing pylons, there are a few holes to be drilled in the outer lower panel of the wings. All the flying surfaces are separate and the twin flap sections per side are made of three parts laminated together, while the ailerons are a single part each to which are added balances and trim actuators. When completed, the six flying surface sections are fitted to the cut-outs at the rear of the wing unit along with a pair of actuators for the ailerons, a pair of exhaust deflectors on top of the engine nacelles, and a large sensor blister at the centre-rear. The wing assembly is then mated to the crew gondola, and the canopy is begun. The blown windscreen that offers the pilot a good field of view has a sight fitted to the top centre before it is glued to the front of the cockpit, then has the clear canopy roof put in place, bridging the gap between the windscreen and cockpit rear. The two canopy sides are next, and these parts are each single pieces, which doesn’t give the modeller the opportunity to prop the front two sections in the open position without taking their life in their hands and cutting the parts with a razor saw or fine scriber and a lot of trepidation. No doubt an aftermarket company will step-in here. Building of the two nacelles begins with the gear bays, which starts with the making of the gear legs that have two main partss and a Y-shaped insert that traps the lower section in place but leaves it movable. Two more parts make up the suspension strut, which are also trapped in place by a V-shaped insert, and then glue is applied to the previously mobile joint, setting the correct angle for the leg permanently. It is glued to the stepped bay forward roof with a number of small parts, after which it is joined by the detailed sidewalls, rear bulkhead and another few parts to close over the rear of the roof and add more detail. The nacelle sides have a couple of holes drilled on each side, and these are joined around the bay assembly, capped off at the front by the intakes and propeller backing plate. Underneath, the triangular inserts with their many raised rivets are glued in carefully to avoid damaging that lovely detail, and two optional towel-rail antennae are glued into the holes on the sides of the nacelle. The two-part rudder is fixed to the tail, and an exhaust is made up from two halves, with baffles within. Align these carefully to minimise the join-line and check your references to get these right. A small intake is added to the side of the nacelle just forward of the exhaust. This process if carried out twice of course, in mirror-image so your Bronco doesn’t fly round in circles. The large horizontal elevator panel is made from top and bottom surfaces plus the elevator itself, and this is slotted into position between the nacelles as they are glued into place under the wings. You might need to grow another hand or two to make this happen, or get yourself one of those wonderful jigs like that of EBMA to help hold everything in place for this. Four optional shark-fin spoilers can be glued onto their corresponding slots in the top of each wing if you wish, or leave them in the box for a clean upper wing. The twin props have the three blades moulded as one, with a front and back boss, and take care to install the correct props on the nacelles, as the blades (and the turboprop engines) are handed, spinning in opposite directions to cancel out the effect of torque steer. A windscreen wiper and various sensor lumps are added around the fuselage, with more underneath, at which point you’ll notice that the main gear is without wheels. Each of these are made of a two-part wheel and two-part hub, with no weighting moulded-in, although that’s easily remedied by a quick sanding of a flat-spot on the bottom, just don’t overdo it so it looks like it needs more air. Fun with weapons is next, and this modeller thinks that the Bronco looks best when loaded for bear, as they say. There are two wing pylons on long supports to add to the outer wing panels, then it’s just a case of choosing which munitions you want to hang from them. There is a diagram showing which weapons can be fitted to which pylons, but if you’re aiming for realism, check your references to establish real-world load-outs for training and live-fire missions. In the box you get the following: 2 x LAU-33 twin rocket pods 2 x LAU-069A 21 rocket pods 2 x Mk.77 Incendiary bombs 2 x LAU-68 6 rocket pods 2 x 150gal fuel tanks 2 x Mk.81 Lowdrag iron bombs with optional daisy-cutter fuse 2 x Mk.81 Snakeye iron bombs with optional daisy-cutter fuse 2 x Mk.82 Snakeye iron bombs with optional daisy-cutter fuse 2 x Mk.82 Lowdrag iron bombs with optional daisy-cutter fuse 2 x LAU-10A 4 rocket pods The detail of the individual weapons is excellent, with multiple parts for fins, fuses and rockets, and only the seamlines to clean up along the way. The canopy is about as clear as can be, so it’s going to be important to mask it up before you inadvertently ruin the startling clarity. Although masks aren’t included in the box, there is a handy template near the back of the instructions that you can place tape on and cut out masks for your use on the model. Each section is numbered and there is another drawing showing their location on the canopy. Very handy! Markings There are five options in the rear of the instructions in various shades of grey and camouflage green, and there’s also a new paint set from ICM themselves that gives you all the shades you’ll need to paint the majority of the airframe as depicted in this boxing. You can read about that in a later review that we’ll link back once we’ve had chance to spray them out. From the box you can build one of the following: OV-10A 155471 Light Attack Sqn. 4 (VAL-4), ‘Black Ponies’, Binh Thuy, 1971 OV-10A 155456 Marine Observation Sqn. 6 (VMO-6), Quang Tri, 1969 OV-10A 67-14649, 20th Tactical Air Support Sqn., Da Nang, 1972 OV-10A 155416 Marine Observation Sqn. 2 (VMO-2), Da Nang, 1969 OV-10A 155416 Marine Observation Sqn. 2 (VMO-2), Da Nang, 1970 The 4th and 5th options depict the same airframe at different periods, which possibly had light grey wings earlier in its career, which was later painted green on the topside, and may have been painted a lighter or darker grey on the underside. The profiles give you the option and leave it up to you. Decals are printed by ICM’s usual partners, with good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. The weapons all have stencils to apply, which are shown next to each profile, as their colours varied over time. There are also rear and white tip decals for the props, and the large wide T-shapes on the upper wings are also included as decals, as are the tapered exhaust gas “hiders” on some of the decal options. Conclusion I’m a happy bunny. I’ve always liked the Bronco, and this new tooling is an excellent looking model that is crammed full of detail that will doubtless encourage new decal sheets into the market to cater for the many buyers. The launch of the paint set is a clever move, encouraging modellers to try their new(ish) paint system. You know you want to! Very highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  14. British Torpedo Trailer (48405) 1:48 ICM via Hannants The British 18” Mk.XII Torpedo was an air-launched variant of the earlier Mk.XI that entered service in the early 30s. The Mark.12 was the variant used by the Fleet Air Arm and RAF Coastal Command during WWII, and could be fitted with a break-off wooden tail fairing to reduce entry speed into the water, and the nose was painted red for a training round, or the less visible black for a live round, which goes against the “red for danger” methodology normally used. The Kit This kit is a single sprue of grey styrene in a small top-opening box that contains parts for a complete torpedo, plus a trailer to transport it around the airfield. The torpedo is made first, built from two halves with a double layer screw and a pair of perpendicular fins at the rear, two of which are moulded in. The optional break-off tail is made from two rectangular end panels, with a single horizontal plane stretching between them. The wooden tail includes the tail fins of the torpedo and is a straight replacement to the standard fins, then a spacer and large spinner are fitted to the front. The guts of the trolley consists of two scissor jacks, and these are both made from four parts each that are mounted onto a slotted base, then surrounded by a framework with two small balancing wheels at either end. A short axle projects from the centre of the rails, and these mount a larger wheel with integrated tyre, plus a winder at each end that operates the scissor-jacks (on the real thing). The torpedo is lowered into the cradle along the trolley’s direction of travel to finish off. The instructions have a sprue diagram on the front page, the build steps spreading over the two central sheets, and at the rear are the painting instructions, with codes from ICM’s new paint range, plus Revell and Tamiya codes as well as colour names. There are two painting suggestions, and from the box you can build one of the following: Net photo – Copyright unknown. Conclusion A nicely detailed set that will complement any diorama scenario or even to personalise a model placed on the shelves of your cabinet. Notice the Beaufort in the background on the box top? Me too Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  15. Leyland Retriever General Service (35600) 1:35 ICM via Hannants The British Army remembered the usefulness of mechanising transport that it learned from WWI, so when war became likely, British companies such as Leyland were tasked with creating a modern truck chassis to be used in the forthcoming conflict. The Retriever was a six-wheeler chassis that could be outfitted with truck bodies, cranes, or even command wagon bodies such as that used by Monty during his campaigns in Europe and the Middle East, which now resides in the Imperial War Museum. It was a flexible type, and thanks to its 6-litre, 4-cylinder petrol engine outputting over 70hp, it could carry a healthy 3 tonne load almost 200 miles before refuelling. Around 6,500 were made in total before the end of WWII, and many were put to good use after their military service in civilian use. The Kit This is a reboxing of a brand-new tooling from ICM, and the second of a series of kits using the same chassis, which already includes the early General Service (GS) cargo body that we reviewed recently. This is the standard GS Cargo, and arrives in ICM’s usual top opening box with captive inner lid. Inside are an increased nine sprues in grey styrene, a small clear sprue, seven flexible plastic tyres, a postage-sized fret of Photo-Etch (PE) and a similarly small decal sheet that is found within the glossy instruction booklet with colour painting guide on the rear page. Detail is crisp, and slide-moulds have been used to add detail to the chassis rails, with the steering wheel having a delightfully crisp set of finger grips on the inside of its circumference. The majority of the box is the same as the early boxing, with just the two new sprues that we’ve marked accordingly. New Sprues Construction begins with the ladder chassis, adding cross-rails, front suspension and the mounting point for the powered double rear axle, after which the Leyland engine is made up from a substantial number of parts along with the four-speed (and reverse) transmission and ancillaries. With the block mounted between the chassis rails at the front, the exhaust downpipe and muffler are installed from below, with a scrap diagram showing the location of the downpipe once in place. The rear axles are mounted either end of a pair of large leaf-springs that pivot around the centre, and these are joined to the motor with drive-shafts as they are slotted into the springs from above, then a number of linkages are inserted in two stages to complete the bogie. The front wheels are free-wheeling, and have brake drums at either end of the steering rack, which is then joined to the underside of the front springs and again linked to the chassis and steering wheel by rods. The rear hubs have their brake drums added to the backs of them before they have their well-moulded tyres slipped over the rim, while the front wheels have a flat back that joins to the drums already on the axle. Finally, the spare is fitted onto a two-part hub and fixed to a bracket with a turnbuckle holding it in place, then it is further attached to a larger set of bracketry for stowing between the cab and load bed. The cab starts with the new firewall with window frame to which the instrument binnacle is added on the right (correct) side, then the floor halves are installed, with the driver’s controls attached to the right hand footwell. The delicately moulded steering wheel and column with brace are slid in through the small hole in the footwell, and the engine cover is constructed from a fixed central section and two L-shaped inspection panels that allow maintenance without removing the whole cab. What initially looks like a pair of stowage boxes at the rear of the cab are in fact the crew seats, which have short back “rests” on the rear bulkhead that is joined by a pair of short sidewalls. A pair of mudguards are attached underneath the floor, then the lower cab is glued to the chassis over the engine compartment, with the radiator assembled from styrene with a PE grille and a pair of PE name badges top and bottom. With the chassis flipped over, the outlet for the exhaust is slipped through a bracket and joined to the back of the muffler, then it’s time to make up the fuel tank, which has separate end caps, and twin mounting brackets that allow it to fit onto the space between the cab and load area alongside the spare wheel. This kit is the cargo version and has a flatbed built up with low sides, bench seats and loading gate at the rear. Underneath the bed are two longitudinal beams with cross-braces slotting into the engraved grooves along its length. To each outer side of the beams are stowage boxes and diagonal mudguards, after which the sub-assembly can be mated with the chassis, then a pair of running boards are attached on brackets between the front and rear wheels. The crew are protected by a canvas roof that has sides and back fitted before it is joined to the cab, leaving just the sides open to the atmosphere, an improvement from the early model, which had no windscreen at all. The front is fitted out with two headlamps with clear lenses, and an optional “shelf” on the left side of the radiator, then side-lights are installed outboard on stalks and a hand-crank is slotted into the front of the radiator at the bottom. The wagon has a canvas cover in real life, but in the model you get the option of leaving the frame as per the Early model, which consists of four lateral inverted U-shaped supports and seven longitudinal ribs that slot into the grooves moulded into the hoops, or adding a canvas tilt. The tilt is actually the simplest option, as it is made from three parts, top and two sides, with the frames moulded into the inside for added detail. Markings It’s a truck in the British Army, so it’s going to be green apart from the canvas tilt, which will be canvas coloured. They didn’t wear much in the way of additional decoration other than number plates and the occasional unit markings. From the box you can build one of the following: British Army, 1940s Lend/Lease Consignment, Winter 1942 Decals are by ICM’s usual printers, which is a guarantee of good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. Conclusion ICM have been filling a lot of gaps in the British WWII softskin range, and this will likely be very welcome, finding a place in a lot of stashes. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  16. WWII Red Army Rocket Artillery (DS3512) 1:35 ICM via Hannants During WWII, Ford UK built a great many vehicles for the British war effort, as well as some 34,000 Merlin engines for Spitfires, Lancasters and Hurricanes. Made by Ford UK under the Fordson brand, the WOT 8 was the last of a long line of vehicles using similar nomenclature in service of the British Army. Introduced in 1941 there were approximately 2,500 built, with a number of those sent to Russia as Lend/Lease vehicles, of which a number were converted to carry BM-13-16 Katyusha rockets on an angled rack that extended partially over the cab and is bolted firmly to the chassis. They carried 16 RS-132 rockets in an over-and-under configuration on each of the eight rails, which made an uncanny howling roar as they were unleashed from the rails. Its large fuel tank gave it a healthy range and a reasonable top speed thanks to the Ford V8 engine that put out 85hp, which wasn’t terrible for the day. The WOT.6 was a 4x4 light truck (3 ton capacity) with a short cab that housed a 3.6L V8 engine pumping out a fairly paltry 85hp that could get it to 75mph eventually. The engine's location under the cab gave the load bed plenty of space on the chassis rail, and also gave the truck a sit-up-and-beg look. The heat from the radiator had to be redirected by a fairing to prevent it being ingested by open windows, thereby cooking and possibly even poisoning the crew if it wasn't in the best of health. Over 30,000 were built in a number of configurations, and they were in service from 1942 to the end of the war, with those in good enough shape carrying on into the early 60s. A great many WOT.6 and WOT.8 wagons were sent to the Soviet Union under the Lend/Lease programme during WWII, and were used in all manner of operations from simple transports to the WOT.8 carrying a Katyusha rocket launcher that was loaded with up to 16 RS-132 rockets. The rockets accelerated off their rails up to almost 800mph and had a flight radius of under 5 miles with a lack of precision that ensured that although you knew something was going to be blown up in a given area, it was anyone’s guess who or what would fall victim to its detonation. They were however incredibly useful for terrifying the enemy, gaining the nickname Stalin’s Organ (no sniggering at the back!) due to the haunting screech as the rockets left their rails. The Kit This is a multi-kit reboxing of existing kits, most of which we’ve seen already, so rather than send you off on a link-following rampage, we’ll gather them all together in the one place, and add in reviews of few parts we’ve not done before. Inside the box are the following kits: 35591 BM-13-16 Katyusha on WOT.8 Chassis 35507 WOT.6 WWII British Truck 35795 RS-132 Ammunition Boxes (reduced sprue-count) 35648 Soviet BM-13-16 Crew (1943-5) 35643 RKKA Drivers (1943-5) There are no decals included in the kits due to Soviet vehicles seldom having much in the way of markings, and their instruction booklets have been gathered in a card folder to keep them together. Let’s crack on. BM-13-16 on WOT 8 Chassis (35591) This is a recent tooling from ICM as part of their expanding WOT line. Inside the bag are eight sprues in grey styrene, five black wheels in flexible plastic, a clear sprue, and a small fret of Photo Etch (PE) brass. I don’t know about you, but I’m an admirer of rocket launchers and such like. Construction begins with the chassis ladder and the front sub-frame with cross-members and leaf spring suspension, plus a full V8 block made up from a good number of parts. The exhaust has a silencer near the rear and exits the underside at the rear of the aft suspension springs to which the rear axle and differential are fitted, then joined to the central transfer box by a driveshaft with the front axle having a similar reversed layout plus steering box. The drum brakes are hidden behind the wheels, which are made up from the flexible “rubber” part that is sandwiched between the inner and outer hub, plus extra detail parts on both sides, eventually slotting onto a long axle front and rear. The underside is mostly complete, and attention turns to the body beginning with the engine compartment between the two curved front wings. Radiator, air filter and fan are added along with a hand-crank for manual starting, then the radiator hosing is installed so that the side plates that isolate the power plant from the crew cab interior can be added. In the right foot well the driver’s controls are added, with a handbrake further to the rear, and a central instrument panel sits almost on top of the engine. The crew seats sit atop boxes and have separate cushions for back and base, after which the cab can be boxed in, adding detail parts and glazing panels as you go. The sloping cab is trimmed with a dash panel and steering wheel, then separate doors with handles and more glazing are put in place either open, closed or anywhere in between at your whim, then closed in with the rear cab and finally the curved-sided roof. The PE radiator grilles have to be bent to match the contours of the sloped front, and these are later joined by a rain “porch” that prevents ingress of water in the winter, and probably helps divert engine heat from the open cab windows in the summer. The spare wheel and the substantial fuel tank are built next, and positioned behind the cab. This is made from a large floor, detailed sides, front and tailgate, with stowage boxes between the front and rear angled mudguards, which have braces holding them at the correct angle to the floor. On the original kit the truck bed would now be made up (and the parts for it are still in this boxing), for this boxing though the rocket launching rails and their elevating apparatus are constructed. The eight rails are built up from three parts each and are then threaded together on three cross members. The modeller will need to line up the spacing of these and luckily ICM provide a jig for this. After the rails are sorted then the fairly complex raising gear is put together, this can be in either the raised or lowered position. 16 rockets can then be added to the rails (8 on the upper side, and 8 on the lower). The base for the launching system is then built up and attached to the back of the truck before the launch rails can then be added on. Two rear ground stabilisers are then added to the chassis. To finish off the vehicle lights are added and on the cab there are shutters to protect the cab when the rockets were being fired. Model WOT.6 WWII British Truck (35507) Inside the outer clear foil bag are seven sprues in medium grey styrene, a clear sprue in its own bag, four flexible black plastic tyres and a sheet of Photo-Etch (PE) parts, each in their own bags. The instruction booklet completes the package, and is printed on glossy white paper in colour, with black and red used for the diagrams throughout, and the unused decal options printed in colour at the rear. The construction phase begins with the chassis, which is made up from two main rails, with sub-rails and spacers holding things together, and front suspension moulded into the outer rails. With the chassis completed by adding the rear end, attention turns to the engine, which is a complete rendering, and made up from a good number of parts for detail, including the block, pulleys, transmission and a short drive-shaft that threads through the holes in the cross-members. The two long exhaust pipes with mufflers go under the chassis on each side, and the rear suspension is fitted, which is a substantial set of leaf-springs, then the axles and drive shafts are attached to the suspension and transfer box. Brake drums, fuel tanks, steering arms and struts are all installed before the wheels are built-up around the rubbery black tyres, which have tread details moulded-in, and are finished off by the addition of the hubs, which attach from both sides, and are then detailed with additional parts before they are slotted onto the axles. The undercarriage is almost done, and it's time for the upper surfaces, beginning with the engine bay, which has the front wheel-arches moulded in, and is then detailed with lights, front rail, radiator and some additional ancillaries to keep the engine running. You even get a pair of lower hoses for the radiator to mate it to the engine, and two more longer ones diving diagonally down into the topside of the engine from the top of the rad. There's going to be a bit of painting needed, as the engine can be seen from the underside, even though access is limited. The bay sides are planted, and are joined by internal covers and instrumentation on top, which have a few decals to detail them up. Some of the driver's controls are added on the right side (the correct side) of the engine, and a pair of seats are built up and added to the square bases installed earlier, then the front of the cab is detailed with clear parts and window actuators, before the sides are attached to the edges and lowered onto the chassis, then joined by the simple dash board and steering wheel on its spindly column. The doors are separate parts and have clear windows, handles and window winders added, then joined to the sides in either the open or closed position or any variation of the two. The cab is a bit draughty at the moment, until the rear panel and the roof are added, the latter having a pop-up cover on the co-driver's side, with a couple of PE grilles then added to the front radiator frames after being bent to shape. Now for the truck bed, beginning with the sides, which have two stiffeners added, then are covered with bumpers along the top and bottom edge of the outside face. The bed floor fits into a groove into the bottom, and is kept square by the addition of the front and rear sides. Under the bed are a number of stowage boxes and racks for additional fuel or water cans, which are happily also included, then they are joined by the two parts per wheel that form the wheel arch that are braced on the outside with two small struts. Then it's the fun part! Adding the bed to the chassis, which is kept in the correct place by two ridges under the bed that mate with grooves in the chassis rail. At the front, two light-hoods are fitted above the lights, and the prominent pedestrian unfriendly hood that deflects the rain and hopefully redirects the engine heat from being sucked back into the open front windows on a hot day. The cab is detailed with additional lights, horn, wing mirrors, grab-handles and even some pioneer tools, then the windscreen wipers. Moving backwards, the four c-shaped hoops that support the canvas tilt are applied to the outside of the bed sides, reaching roughly half-way down the sides to obtain a strong join in both 1:1 and 1:35. The final act is to add seven rods along the length of the roof section of the tilt frame, which will need some careful alignment to ensure all the hoops are vertical and correctly spaced. Now you can paint it, but you've probably got a lot of that done already in truth. RS-132 Rockets This half-set is a recent tool that is made to stack in the back of a resupply wagon like the WOT.6 above, or spread liberally around the scene. Inside the re-sealable clear bag are two sprues of grey styrene. Both sprues are identical, and from the box you can build two additional ammo crates, each holding four rockets apiece. Ignore the x4 in the middle of the photo above and imagine a nice white x2 instead The Crew Figures (35648) All four figures within the bag are on one sprue with a separate instruction booklet and product code. They are moulded in ICM’s by now familiar lifelike style, with lots of detail, realistic poses, sculpting, and including a number of weapons to sling over their shoulders. Three of the figures are shown loading rockets onto the back of the rails, while the fourth can either be their commander watching over the process, or with the tweak of his arm, he can be propping up the next rocket for loading with one of his hands, as can be seen in the picture below. RKKA Drivers (35643) This small bag contains two sprues in grey with a set of figure parts on each one. They are different in pose as well as head-coverings, but both are in the seated position with their arms outstretched to hold the steering wheel. Honk! Honk! One figure is wearing standard WWII era uniform with a parade cap at an angle on his head, while the other is wearing a winter-weather insulated smock with medal and a traditional Soviet-style fur cap with fold-down ear flaps tied over the top. Both wear calf-length “Cossack” boots. Conclusion All of the kits in this set are excellent modern toolings in their own right, and how they’ve fitted them all into one reasonably small box is quite surprising. The price is also very attractive, and if you can see yourself using all the models in the set, they’re a bargain even at list price. They should rocket off the shelves Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  17. Type G4 Partisanenwagen WWII German Car (35530) 1:35 ICM via Hannants Mercedes aren’t massively keen on being linked to their work on vehicles used by the Nazis during WWII, for obvious reasons. This huge touring car was developed by them on the W31 platform that was notable not only because of its size, but also the fact that it had a third axle at the rear, with both rear axles driven by a 5 litre V8 engine that could lock out the differential for maximum traction, and used a four-speed gear box, some of which were synchromesh – a luxury feature at the time. It was complex and expensive to manufacture, so only a small number reached the German military, and these were soon co-opted into use by the SS and senior members of the party. By 1938 a larger engine was installed, and it was this later model that was used by Adolf Hitler during parades and other such high-profile appearances. Only 30 of the last variant were made, with production finishing in 1939 as war broke out. They were used throughout the war by the Nazis, and thanks to their cost and cachet, the Wehrmacht never saw sign of them for their use. Their seven-seat passenger compartment was luxurious by comparison to other vehicles of the era, and the drop-down hood was ideal for their use as a VIP transport, although Hitler’s cars were fitted with additional armour and bullet-resistant glass, further slowing its top speed thanks to the extra weight. It was capable of driving on all terrain, depending on whether the correct tyres were fitted, but this also limited its top speed to just over 40mph. How fast the armoured variants were(n’t), you can probably imagine. The VIP examples had rear-view searchlights installed to blind anyone aggressively chasing the vehicle, and a pair of MG34 machine gun mounts could be installed, although the passengers probably wouldn’t have appreciated the hot brass raining on them in the event of an ambush. These were used as convoy protection from ambush by Partisans, hence the name. The Kit This is a reboxing with new parts of ICM’s 2011 kit of these six-wheeled monster, which has been reboxed a few times since its original release, and is now with us in the Partisanenwagen guise, complete with a pair of MG34 machine guns mounts in the passenger compartment. Inside the box are eight sprues in grey styrene, a small sprue of clear parts, a tiny decal sheet containing instrument dials, and the instruction booklet with a page of colour profiles on the glossy back cover in full colour. Construction begins with the V8 engine with block, cylinder head, transmission, exhaust manifolds and ancillaries all depicted, which has a short drive-shaft attached at the rear, directing the power toward the back wheels. The box-section ladder chassis is next with numerous attachments to the outer edges, then cross-braces are fitted along with the big 5 litre engine. The two sides of the chassis are joined, with other additional parts supporting the central section, a stowage box on the left rail, then the lowest parts of the bodywork is attached to the front of the chassis around the engine, and the steering column is mounted on the left chassis rail. The front suspension consists of a pair of leaf-springs separating the chassis from the front axle, which has pivots for the front drum-brakes and links to the steering arm, with smaller parts completing the assembly before it is glued into the underside of the front chassis, after which it has dampers fitted on each side. The rear suspension has two inverted leaf-springs per side, one above and below the central pivot, with a pair of axles and their differential housings in between the two sides. It attaches to the chassis and drive-shaft, which also has another shaft linking the two diffs from above, plus a few control arms, then the exhaust is made up with two ribbed header tubes leading from the manifold into a single wider pipe that has a muffler and the final long exhaust that leads to the rear of the vehicle. This attaches to the right chassis rail and a linkage between the steering and front axle is dropped into place. In a rather confusing move, the rear axles are shown as being in place in step 48, but are installed in step 49, along with the steering linkage. Someone had a little hiccup there, I suspect. The six wheels are of two types, and four are made for the rear, with the front hub, tyre and contact surface moulded into one part, and the rear wall a separate part, as is the centre of the hub and drum brake housing. The front wheels don’t have a centre part, as this is already on the front axle. The vehicle can now stand on its wheels for the first time, while you attach the running boards and front wheel arch to the chassis, and the L-brackets that were fitted earlier. The firewall is made from three sections, with the windscreen and wiper arms moulded-in, that has the clear windscreen part added from inside. The dash panel with two supports is also inserted from behind, and has decals for each of the dials in the centre binnacle, with a horn and fluid pot on the engine side of the firewall. The floorpan is a single panel, but it needs a single 2mm hole drilling in the rear of the forward section, with a scrap diagram showing the correct location of the hole to help you get it in the correct place. A trio of foot pedals are glued to the angled front of the pan, then the firewall is joined to the front along with the rear section that is made from two side sections and the rear. Flipping over the bodyshell allows you to put the two double arches in place, which both have a foot-hold and stowage box hidden in the fairing between the two cut-outs, and rear light clusters attached. The boot is a trunk that is attached to the rear of the body on pegs, which has two main parts plus brackets and handles added before it is glued in place. The fuel tank and three-part armoured surround are built next, with filler tube, tie-down lugs and rear searchlight added before it is glued in under the back seats, then a pair of lower body panels under the front doors are joined while the body is upside down. Flipping the body back over, the rear bench seat is made from six parts and includes a pair of luxurious arms, plus generous cushions to keep the passengers comfortable on even the roughest terrain. The centre seats are individual units, with grab-handles on the rear, and “proper” arm on the outer side, plus a smaller tubular arm with comfort pad on the inner side. These are dropped into the bodywork and located on a couple of pegs each along with their door handles on both sides. The front seats have separate bases, but a bench rear, and while these also have grab handles for the passengers behind, they’re the only ones without arms due to the proximity of their sides to the door. A pair of B-pillars are added to the sides of the bench backs, then the two doors per side are each made up as a single unit, having glazing added to the front along with handles, winders, décor strip, and a pistol holster on both of them. These are glued into the frames on the body, and a rear glazing panel that includes the window for the rear door and the fixed quarter light in one part per side. Now the body can be joined to the chassis and I’ll be totally honest here, a weird-looking two-part pistol-shaped “box” is glued together and attached to an oval hole under the chassis. If anyone can tell me what this is, they’ll get a Tufty badge. There is a spare tyre on each side of the engine compartment, resting in a dished area in the front arches, and attached via a twist-on nut with handle. The tyres are made up from two parts in the same manner as the front wheels, and they are dropped into place along with the prototypical Mercedes grille, complete with three-star logo. You ain’t seen this, right? The side panels have six moulded-in vent-doors on both sides, while the right side has cut-outs for the down-pipes from the manifold, and both have latches and a central grab-handle, then they are topped off with the cowling top, with moulded-in vents and piano-hinge where the cowling folds up for maintenance. Headlights are added on a bar with convoy light in the middle, sidelights and number plate board are inserted between the two front fenders, with latches, handles, searchlights and short flag poles either side of the grille are all dotted around the front and sides of the vehicle, and strangely the gear lever and handbrake are installed in the front of the cab at this late stage, to be joined by the two-part steering wheel, rear-view mirror and two flip-down sun visors that fit on the top of the windscreen frame. The folded-down hood is appropriate for this vehicle, as the MG mount would baulk its closing, so the folded hood is made from two parts representing the fabric, and two additional parts for the visible parts of the framework on either side. These fit into two holes in the outer lip of the body at the rear, and can be glued in place for safety’s sake. The two MG34s are on separate mounts, and each one has a separate breech top, folded bipod and drum mag, then each one is clamped between a two-part perforated bracket and have a corrugated guide fitted to direct the spent brass downward and away from the passengers as far as possible. The longer mount installs in the hole in the floor you drilled earlier, and the shorter mount is fitted to the rear on the left by drilling another 1.4mm hole just inside the hood. Markings There is only one option offered for this kit, and that is panzer grey. It’s not going to light any fires, but that’s the colour they were, unless you wanted to do something fanciful. From the box you can build this big lump: Decals are up to ICM’s usual standards, and the tiny sheet contains just one decal for the vehicle’s instruments. Conclusion A welcome rerelease of a brute of a car that was used extensively by the Nazis. If you get a few, you could depict a convoy of them on their way to or from an arm-lifting engagement with Mr Hitler sat in one of them. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  18. Chevrolet G7107 WWII Army Truck (35593) 1:35 ICM via Hannants The Chevrolet G506 truck formed the basis of a range of 4x4 load-carrying vehicles that were capable of carrying up to 1.5 tonnes of cargo or equipment. They were initially made under the 4100 code, then moved to the 7100 range, and usually had a standard enclosed cab, with a 3.9L straight-6 engine under the bonnet, with a four-speed “crash” (non-syncro) gearbox putting down a little over 80hp through all four wheels. It rapidly became the Allies’ standard light truck, and served in substantial quantities with the Allies in the West, the Soviets in the East, and the forces fighting Japan in the Far East. There were a lot of variants, some in US Army service, others in USAAF service, with almost 50,000 of two specific types, the G7107 and G7117 sent over to the Soviets under the Lend/Lease program. The G7017 had a cargo bed with canvas top, while the G7117 was the same except for the addition of a winch to give it some static pulling power. They were well-liked by their drivers and crews, and were adapted to other tasks due to their ubiquity, such as being used by the Soviets to carry Katyusha rockets on a stripped-down flatbed. I’d be willing to bet that’s probably going to be one of the later boxings, even if I didn’t know that was the case already. The Kit This is a brand-new tooling from ICM, and is the first kit of a range that is inbound to your favourite model shop very soon. It’s an ICM kit, and a full interior kit too, with engine cab and load area all included along with some very nice moulding and detail, particularly in the chunky tyres. It arrives in one of ICM’s medium-sized top-opening boxes with the usual captive inner flap, and inside are five sprues in grey styrene, a clear sprue, decal sheet and glossy instruction booklet with colour profiles on the rear pages. Construction begins with the ladder chassis, which has leaf-springs fore and aft, cross-braces and rear towing eye fitted to create the structure, then has the rear bumper irons, fuel tank, transfer casing and front axle installed, before the engine is built up based on the straight six-cylinder block, with carburettor, dynamo and transmission added, plus the pulleys and fan at the front, and a short drive-shaft at the rear that links to the transfer box in the middle of the chassis. The rear axle is made up and fitted with another drive-shaft, while the front axle gets the steering arm installed, which keeps the twin ball-jointed hubs pointing in the same direction, providing you’ve not been over-enthusiastic with the glue. The exhaust and its manifold slip into the underside of the chassis from below, and the battery box attaches to the outside of the ladder chassis next to a pair of tread-plated steps, then from the left of the engine, the air box and intake are attached to finish it off. The crew cab is next, beginning with the dashboard that inserts in the front bulkhead along with a top panel, then is joined with the cab floor and decked out with a pair of levers, gear stick and hand-brake on the floor, three foot pedals and the steering wheel on a long column that slides through a hole in the diagonal floor section in front of the pedals. The driver and co-driver share a bench seat that is made up from back, cushion and a C-shaped surround that fits into the rear of the cab and has the back wall with small ovalised window, then the roof fitted, after which the doors are made up with handles, winders and glazing, fitting within the frame in the open, or closed position. On the front of the firewall a vent is glued to the scuttle panel, and two reservoirs are attached, then the cab is mated to the chassis along with a couple of additional engine ancillaries and linkages to the front axle. The radiator is laminated from core, surround and tin-work, with a bezel fitted to the front and the assembly is then applied to the front of the engine, attaching to the chassis and input/outlet hoses that are already there. The cowling sides and front fenders are installed to permit the front grille to be attached, plus the bonnet and a large front bumper iron that runs full width, and is quite literally a girder. Behind the cab a spare tyre is placed on a bracket near the exhaust, and attention turns to the load bed. The load bed floor is a single moulding with a ribbed texture down the walkway, and a thick rear section with hooks, and the optional reflectors moulded-in, which are removed for three quarters of the decal options. The same is true of the shallow sides, which also have a series of tie-down hooks fixed along their lengths, and the front upright gets the same treatment. An upstand incorporating two vertical pillars is glued to the front, and a pair of sides that consist of siding on five pillars per side are made up and are added to their locations, while underneath the floor is stiffened by adding four lateral supports, a trapezoid rear valence with lights, and four vertical mudguard boards and their supports. The front valance has a hole with a length of tube for the fuel filler to travel, and the final position of this tricky part is shown in a scrap diagram to help you with placement. It’s time for the wheels to be made up, with singles at the front, each made from two halves each, and twin wheels at the rear axle, put together with two two-part wheels each, and two hub parts added to the finished pair. Each wheel slips over its respective axle, and is secured in place by a central cap. There is a choice of steps when completing the load bed, as the lower portion of the sides can be built either vertically to make maximum use of the cargo area, or with the lower sections flipped down to form seats for the transport of troops. This is accomplished by using a different set of supports, fitted vertically for stowed, or diagonally below for deployed. Both options then have the five tilt hoops fixed into the tops of their pillars to finish off. The model is finished off with front light with clear lenses, door handles, bonnet clasps, wing mirrors, and a choice of open or closed front windscreen parts, which requires the fitting of alternative wipers to accommodate the horizontally stowed screen, which has small supports fitted diagonally against the A-pillars, as shown in scrap diagrams at the end. Markings These Lend/Lease vehicles were usually left in their arrival scheme of olive drab, but were personalised with unit and other markings. Some would probably have been re-painted at some point, but that’s down to your references. From the box you can model one of the following machines: Vehicle from Lend-Lease consignment, 1943 14th Guards Mechanised Brigade of the 4th Guards Mechanised Corps, Yugoslavia, 1944 1st Belorussian Front, Poland, Kustrin, Feb 1945 10th Guards Mechanised Brigade of the 5th Guards Mechanised Corps of the 4th Tank Army, Czechoslovakia, May 1945 Decals are printed by ICM’s usual partners, which is a guarantee of good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. Although undocumented, there is a decal provided for the central instrument binnacle in the cab, which is nice to see. Conclusion Maybe it wasn’t very high profile at the time, but this was an almost ubiquitous vehicle in the Lend-Lease supplies to Soviet Russia that helped to carry out the crucial task of keeping the front-line supplied with weapons and supplies. Moulded in great detail as we’ve come to expect from ICM. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  19. Model T 1914 Fire Truck (35605) ICM via Hannants The Ford Model T has gone down in history as the world’s first mass produced car, introducing the production-line in a manner that would still be familiar to modern eyes, only perhaps with not so many robot arms flailing around. That production line ran from 1908 to 1927 with over 15 million sold. Its so-called three-speed transmission included a reverse gear rather disingenuously, and the four-cylinder 2.9 litre engine could output a whole 20bhp through the rear axle to reach a top speed of just over 40mph at some point after you floored it. It was capable of 25mpg with a light foot, and over the course of production, many different applications and body styles were envisaged for the first world-wide car, including armoured cars, trucks and fire trucks. The Kit This is a new boxing of the recently released base kit with new parts specific to its task. It is in the predominant AFV scale of 1:35, although ICM have also tooled a 1:24 series of kits that have been released alongside these to appeal to the car modellers in their main scale. It arrives in a medium-sized top-opening box with ICM’s usual captive inner lid, and inside are two sprues in grey styrene, a small sprue of clear parts, no decals and a glossy colour instruction booklet with the painting guide on the rear page in full colour. Construction begins with the radiator surround that is moulded to the front axle and has the Ford logo in the centre of the core insert, and on the header tank of the surround. This is fitted to the floor pan, which has two styles of tread-plate engraved into the footwells and the running boards between the fenders. Some small parts are added under the front, then the engine block is made up with its transmission and other ancillaries added along the way. Incidentally, this engine stayed in production until 1941, long after the Model T became extinct as a complete vehicle. The engine is fitted into the bay behind the radiator, and is plumbed into it with entry and exit hoses. Underneath is the long exhaust pipe with a single muffler box that is made from two halves with the exhaust tip moulded to the separate part that extends it to the back of the vehicle. The drive-shaft with its large differential housing is fitted between the rear drive-shafts and suspension part, and is inserted into the underside with the drive-shaft mating to the back of the angular transmission housing. Suspension braces are added to the front and rear axles, along with the steering arms that fit to the rear of the front axle, then the single-part spoked wheels with pneumatic tyres moulded-in are clipped over the ends of each axle. The wheels are very well moulded, with air valves and sharp spokes on each one, plus a well-defined rim and tyre tread detail. The early Model T had a faceted five-faced cowling over the engine until 1914, the two sides lifting up on a central hinge that ran from front to rear of the top face. The hinge is attached between the bulkhead and the radiator, and the two lift-up panels are added over the top to complete the cowling, although you could also leave one or both open to show off the engine, but you’ll need to remove a couple of ejector-pin marks, which is easily done because the cowlings are flat-surfaced and should be a little thinner to be more realistic anyway. The front floor pan has the Ford logo in the passenger well according to the instructions, but there’s just a section of ribbing there on the plastic, as well as some more treadplate patterning, and this is sandwiched between the two lower sides of the body, with a spacer at the rear. It is lowered onto the chassis and the three foot pedals and handbrake lever are inserted into their slots on the left (wrong) side. A quick trip to the furniture store has you making up the front seats (read “couch”) from an L-shaped seat pad with quilted surface, and matching texture is also present on the arms. The completed soft furnishing is fitted within an outer shell that is made from base, back and two side panels, then it is installed on the raised platform between the front and rear areas. A rear lamp is made up with a clear three-sided wrap-around lens, then the rear passenger compartment is filled with a pair of water tanks, which are three parts each, and joined together by a frame that has control wheels at the rear, along with pressure regulators with more valves on the top. A large stowage box is fitted on a frame over the tanks, and each side is perforated to form a diamond mesh pattern, with a coiled hose placed in the bottom, linked to the manifold in the rear of the vehicle. The driver’s fifth wheel has a pair of controls mounted at the top and a long column added, then it is slid into a hole in the sloped part of the floor in front of the pedal box. Two front lights are made up in the same manner as the rear lamp, but they have handed brackets to fit on the bulkhead, while a two-layered ladder is fastened to the left side of the vehicle on a pair of brackets that form part of the rear equipment area. Two more headlamps are each given clear lenses and their cylindrical bodies are made of two halves, split top and bottom. Another lamp, this time a searchlight also has a clear lens and fits to the top of the bulkhead, with a bell for the dinging-of on the opposite side next to the driver. Two types of fire extinguisher and a short drum are the final parts that fit on the right running-board, with the optional hand-crank for the engine slipped into the front under the radiator. Markings There is only one colour option supplied on the back page, and it’s not going to surprise anyone that it’s predominantly red with a bit of brass for the fitting, plus a pale grey set of tyres. When did tyres become black? There are no decals, as already mentioned, so registration and all that aren’t of any interest for a change. Cool. Conclusion ICM have done really well with this range of Model Ts in both scales, although the 1:35 kits are of more interest to me personally. Moulding is excellent, with some really crisp detail on show, both in the metal areas as well as those ever-so-comfy front seats. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  20. WWI Belgian Infantry (35680) 1:35 ICM via Hannants Ltd At the beginning of WWI, Germany demanded free passage through Belgium, and when they refused, they invaded anyway, commencing hostilities with the Belgian forces on the 3rd August 1914, with Britain declaring war on Germany the day after due to treaties between them. In the early days, there was a distinct lack of understanding of the type of conflict the various combatants were heading toward, and uniforms and equipment was still reminiscent of days gone by, with bright colours and soft helmets, plus swords carried by officers and cavalry riding horses into the face of withering fire from machine guns. The Belgian forces fought bravely against the German onslaught for a month but they and their Allies ended up pulling back, leaving most of Belgium under German occupation for the rest of the war. This figure set arrives from ICM in a small top-opening box with their usual captive inner flap, and within are three sprues of grey styrene and a single sheet of instructions, printed on glossy paper in colour. The largest sprue holds the four figures, while the two smaller ones contain lots of accessories and weapons to assist in personalising the finished articles. The four soldiers are dressed in dark blue tunics with lighter blue trousers, and are all striking a crouching pose as if they were under fire. The officer with his sword is aiming his pistol from a kneeling position with his free hand supporting some of his weight, while two of the troopers are aiming their Belgian-made Mauser M1889 rifles from the kneeling position with large packs on their backs. The final figure is cocking or reloading his rifle with a fresh stripper-clip of 5 x 7.65mm rounds. The figures are broken down sensibly to improve the detail and hide the seams as far as possible once complete, while the tails of the tunics that are hanging loose are moulded as separate parts, as are their caps, some of which can be exchanged for metal bowlers akin to the French WWI type. The instructions consist of a page of sprue diagrams with a colour chart, and a full side of colour drawings of the figures on the other side, with their parts and colours called out around them. To avoid too much confusion, the colours letters are printed in red boxes that correspond with the chart overleaf, which should keep you cool due to the constant flipping of the page. The colour key has colour names in Ukrainian and English, plus ICM’s own brand-new paint system as well as Revell and Tamiya. Conclusion There aren’t many sets of WWI Belgian soldiers out there, so this one is a welcome sight, and with ICM’s excellent sculpting and moulding, they should make up well. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  21. German AFV WWII Marder I Acrylic Paint Set (3003) ICM via Hannants ICM have been a plastic model company that is well-known to most of us for quite a few years now, and until today(ish) they haven’t had their own paint range, which is now changing. There are 77 acrylic colours in the initial range, plus three varnishes in matt, satin and gloss, all in the same 12ml plastic bottles. A conversion chart is available that will give you equivalents in AK, Tamiya, Humbrol, Gunze, Testors, RLM, RAL, FS, Revell, AK Real Color, and even Citadel paints, although there aren’t many cross-overs in that last one. This set arrives in a card box with a header tab at one end, and inside are six 12ml plastic bottle with white plastic lids and a one-time tear-off safety ring. While they bear a passing resemblance to another brand of paint from ICM’s neighbourhood, they have stated categorically on Facebook that it is not a collaboration, and having now used both brands, they are indeed substantially different in look and use. The paint is undiluted, so will need thinning by between 40-60% with water or acrylic thinner for use with an airbrush, and they naturally have a semi-gloss finish that can be adjusted by the use of varnishes, and are waterproof when dry. During testing, I used Ultimate Thinners, my go-to thinners for any acrylic paint, which really keeps down the number of bottles in my spray booth. The paint comes out of the bottle quite thickly, so it’s possible you’ll have to dilute for good brush painting use although I didn’t during testing, so a small bottle will go a long way in either case. It sprays well when diluted, and like a lot of acrylics a light coat is best initially, then lay down heavier coats until you have the coverage you require. It dries quite quickly, and is touch-dry in 5-10 minutes in 20-23oc temperatures. All the solid colours went down without a hitch, while the metallic shade was a little more tricky initially. I had to start again a couple of times as I had inadvertently applied the initial coat too thickly, which had led to beading. Eventually, lighter coats with a rest between them did the trick. I suspect that could have been down to my inexpert thinning. Airbrush I sprayed out a patch of each colour on some blank credit card sized plastic sheets, taking up half for each colour except Gun Metal. As there are only five actual colours, I sprayed the full card with that, and over-sprayed a coat of Matt Varnish on one half of the gun metal to demonstrate the matting effect of the varnish. You can see the finished cards below. From a novice’s point of view with this brand, I’m pleased with the results, especially the Gun metal, which gave a good finish after my original bumblings. They are very densely packed with pigment, and the paint is almost of the consistency of custard from some of the pots, so a little will go a long way. I’m not a fastidious user of specific ratios of thinner to paint, so I usually splash in the Ultimate Thinners until it’s the consistency of semi-skimmed milk, then crack on. It might occasionally need adjustment, but it sure beats standing there for hours counting drops. I’m getting old! As always, I primed the cards to obtain a good consistent surface, for which I used a rattle can of Tamiya grey, as it was close to hand and convenient. Primers give a surface a microscopic key that helps acrylic paint stick, as well as providing an even colour over which to paint, and show-up any blemishes before you put the final coats on your models. It’s an accepted fact that acrylic paint is less robust than enamel or lacquer paint, so building up your colour coats on a firm foundation is a must if you are endeavouring to produce a good, professional, or at least half-way decent finish. Even for brush painting, it’s still a good idea, which was demonstrated when I scraped vigorously at the paint with my fingernail. Although the paint was damaged, very little of the primer was exposed, even on the Gun Metal, which had been wet 30 minutes earlier, where there was no primer visible, and absolutely zero lifting of the paint occurred when I burnished some Tamiya tape onto the surface and tore it off later in a careless and flamboyant manner. The airbrush I used for the test was a Gunze PS-770 with a 0.18mm needle, and it suffered zero blockages and no paint drying on the tip even though it was a warm day, so if your airbrush has a nozzle larger than that, and most are between 0.2 and 0.35mm, it should give you no trouble at all in that respect. Paint Brush I’m not a brush painter, so let’s get that out of the way firstly. I primed another card and brushed out a stripe of paint with an AMMO No.6 Synthetic Filbert brush, which is a flat tipped brush that has gently rounded edges. We reviewed them some time back if you’re interested here. I paused after one coat and took a picture to show the level of coverage you can expect. It was pretty good, perhaps slightly thinned due to the dampness of the brush after all but the first Middle Stone stripe, and I was pleasantly surprised at how easy it was to lay off the paint to reduce the appearance of brush strokes. The paint is very nice to use, and it spreads around well on all but the driest of surfaces, but I think the curved edges of the brush may also have helped. After the second coat there was no primer visible through the paint, and again there was very little in the way of brush marks. This is among the nicest paint I’ve brushed out, although I’m no expert due to my consistent use of an airbrush for anything but the smallest areas. If I had the full set, I’d still be tempted to use them for detail painting and dry-brushing, as the are so good. The performance of the varnish seems to have been the only drawback with a paint brush, as it has left a streaky satiny finish even after two coats from a pot that has been electronically stirred and had a glass stirring ball dropped into the pot beforehand. I’m still prepared to give it the benefit of the doubt however, as it worked well enough with the airbrush. Conclusion For a company that hasn’t been in the paint game before, ICM have hit the ground running with the quality of the paints. Some people have wondered at 12ml being a little small, but you’re not paying for any extra water to be delivered to you, so it should balance out when you’ve thinned them sufficiently. They’re excellent for airbrush and paint brush work, and if I can figure out where I went wrong brushing out the matt varnish, I’ll alter the review accordingly. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  22. Marder I on FCM 36 Base (35339) 1:35 ICM via Hannants The Marder series of Tank Destroyers were originally created to fill a need for mobile artillery that could be self-sufficient and yet work in unison with troops and tanks at the high speed of Blitzkrieg. The concept was to mount a PaK40 or captured Soviet 76 mm F-22 Model 1936 divisional field gun on a captured tank chassis that had been stripped of its superstructure and given an extended splinter shield around the gun and its crew, whilst leaving the roof open to the elements. Many of the initial Marder Is were built on French Lorraine or Czech 38(t) chassis, but a small number were constructed on the obsolete FCM 36, with a large shield that extended almost the whole length of the vehicle. FCM stands for Forges et Chantiers de la Méditerranée, who were based at Toulon in the French Riviera. They saw use on the Eastern Front initially, then also in the West after D-Day. Although they were intended to be mobile artillery that was capable of destroying most tanks at a respectable range, they were only lightly armoured to protect their crews from shrapnel, shell splinters or light arms fire from all-round, which is somewhat better than a standard artillery piece would afford its crew, although the open roof would make a tempting target for grenades or demolition packs in close combat. It would have been uncomfortable for the crew in bad weather too, necessitating a temporary tarpaulin roof to keep the precipitation out, but very little of the cold. The Kit This is a substantial re-tool of ICM’s previous FCM 36 kits, adding the specialised parts for the conversion undertaken by Baustokommando Becker at the time. It arrives in a standard ICM top-opening box with additional captive inner lid, with seven sprues in grey styrene, two flexible black sprues of track links, a decal sheet and glossy instruction booklet with colour profiles in the back pages for painting and markings. The original FCM 36 kit was only released in 2020, so it’s a modern tooling with plenty of detail and this boxing includes the majority of the interior due to the open roof. Construction begins with the lower hull, which is made up initially of the floor and two sides, with bulkheads added to the sides to support the lower sponson panels that give the vehicle more ground clearance. The running gear is made up from a three-part drive sprocket, eighteen sets of twin wheels that are fitted to eight double bogies and two singles, then the big idler wheels at the rear of the hull on sliding tensioning axles. The sloped armoured upper sponsons are installed along the way, with the mud-shedding apertures on each side. Two pairs of return rollers on the top run are glued inside the sponson, then the flexible black “rubberband” tracks are glued together, the instructions neglecting to mention that styrene glues won’t join them, so you should use super glue or epoxy instead. Each run has two sections, with the joints best placed in the centre of each run so they stand less chance of being seen on the finished model. Detail on the tracks is very nice, with twin guide horns and perforated centres like the real thing, but of course the links will curve round the ends, rather than give the correct faceted look that individual links provide. The upper hull is a new part, and has an opening at the front where the turret would have been, and has the two fender sides fitted to the rear before it is joined to the lower hull, hiding most of the upper track run. At the rear a large louvered panel and fixtures on the final-drive access hatches are glued on first, with the two exhausts and their mufflers slotted into grooves to their side, and a C-shaped manifold joining them at the top. Pioneer tools and towing eyes are the final parts for now, because the gun must be made up first. The PaK40 is begun by making up the cradle and inserting the breech, then the one-piece gun tube and part of the elevation mechanism. The cradle trunnions are held in place by the side frames, which are fixed to the arrow-shaped floor. More of the elevation mechanism is added, then the floor is mated to the hull, covering up the turret aperture, then having armoured supports slipped under the overhang. The gun’s double-layer splinter shield is slid over the barrel and glued to the gun, then the two faceted side panels are fitted out with shell racks, then attached to the side of the vehicle, to be joined by the rear wall after adding some stowage boxes inside and a pair of louvered panels to the sides. Twenty-eight shells are supplied on the sprues to be slotted into the holes in the racks nose down, then some spare tracks are fixed to the sides, and the self-defence MG34 machine gun is fitted to the front shield on a short pintle-mount. An outer splinter shield slides over the gun, and then you can put on the two-part muzzle brake, which gives the impression of a hollow barrel. Markings There are three markings options on the decal sheet, with a nice variation between them, all of which saw action (or training exercises) in 1943. From the box you can build one of the following: 931st Assault Gun Division, 2nd Battery, France, 1943 Training camp of the Mobile Brigade “West”, summer 1943 Mobile Brigade “West” 2nd Battery, Manoeuvres, Spring 1943 The decals are printed by ICM’s usual partner, which is a guarantee of good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. Unusually for a model review, we’re going to talk about actual paint. That’s because ICM have just recently announced that they are launching their own range of paints, beginning with a set of 6 pots for this particular model, with another set for their Cobra helicopter kit in 1:32. The rest of the range will be following along in due course, totalling 77 in all. If you’d like to know more, follow the link at the end of the review (I’ll add it later). Conclusion Another peculiar, interesting example of German re-use of captured vehicles, and a nicely detailed one too. Now you can also paint your model with ICM paints, which is novel. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  23. Leyland Retriever General Service – Early (35602) 1:35 ICM via Hannants The British Army remembered the usefulness of mechanising transport that it learned from WWI, so when war became likely British companies such as Leyland were tasked with creating a modern truck chassis to be used in the forthcoming conflict. The Retriever was a six-wheeler chassis that could be outfitted with truck bodies, cranes, or even command wagon bodies such as that used by Monty during his campaigns in Europe and the Middle East, which now resides in the Imperial War Museum. It was a flexible type, and thanks to its 6-litre, 4-cylinder petrol engine outputting over 70hp, it could carry a healthy 3 tonne load almost 200 miles before refuelling. Around 6,500 were made in total before the end of WWII, and many were put to good use after their military service in civilian use. The Kit This is a brand-new tooling from ICM, and the first of a series of kits using the same chassis, which already includes the later General Service (GS) cargo body that will be with us soon. This is the Early type GS Cargo, and arrives in ICM’s usual top opening box with captive inner lid. Inside are seven sprues in grey styrene, a small clear sprue, seven flexible plastic tyres, a postage-sized fret of Photo-Etch (PE) and a similarly small decal sheet that is found within the glossy instruction booklet with colour painting guide on the rear pages. Detail is crisp, and slide-moulds have been used to add detail to the chassis rails, with the steering wheel having a delightfully crisp set of finger grips on the inside of its circumference. Construction begins with the ladder chassis, adding cross-rails, front suspension and the mounting point for the powered double rear axle, after which the Leyland engine is made up from a substantial number of parts along with the four-speed (and reverse) transmission and ancillaries. With the block mounted between the chassis rails at the front, the exhaust downpipe and muffler are installed from below, with a scrap diagram showing the location of the downpipe once in place. The rear axles are mounted either end of a pair of large leaf-springs that pivot around the centre, and these are joined to the motor with drive-shafts as they are slotted into the springs from above, then a number of linkages are inserted in two stages to complete the bogie. The front wheels are free-wheeling, and have brake drums at either end of the steering rack, which is then joined to the underside of the front springs and again linked to the chassis and steering wheel by rods. The rear hubs have their brake drums added to the backs of them before they have their well-moulded tyres slipped over the rim, while the front wheels have a flat back that joins to the drums already on the axle. Finally, the spare is fitted onto a two-part hub and fixed to a bracket with a turnbuckle holding it in place, then it is further attached to a larger set of bracketry for stowing between the cab and load bed. The cab starts with the firewall to which the instrument binnacle is added on the right (correct) side, then the floor halves are installed, with the driver’s controls attached to the right hand footwell. The delicately moulded steering wheel and column with brace are slid in through the small hole in the footwell, and the engine cover is constructed from a fixed central section and two L-shaped inspection panels that allow maintenance without removing the whole cab. What initially looks like a pair of stowage boxes at the rear of the cab are in fact the crew seats, which have short back “rests” on the rear bulkhead that is joined by a pair of short sidewalls. A pair of mudguards are attached underneath the floor, then the lower cab is glued to the chassis over the engine compartment, with the radiator assembled from styrene with a PE grille and a pair of PE name badges top and bottom. With the chassis flipped over, the outlet for the exhaust is slipped through a bracket and joined to the back of the muffler, then it’s time to make up the fuel tank, which has separate end caps, and twin mounting brackets that allow it to fit onto the space between the cab and load area alongside the spare wheel. This kit is the cargo version and has a flatbed built up with low sides, bench seats and loading gate at the rear. Underneath the bed are two longitudinal beams with cross-braces slotting into the engraved grooves along its length. To each outer side of the beams are stowage boxes and diagonal mudguards, after which the sub-assembly can be mated with the chassis, then a pair of running boards are attached on brackets between the wheels. The crew are protected by a canvas roof that has sides and back fitted before it is joined to the cab, leaving the front and sides open to the atmosphere – lucky drivers! The front is fitted out with two headlamps with clear lenses, and an odd “shelf” on the left side of the radiator, then side-lights are installed outboard and a hand-crank is slotted into the front of the radiator at the bottom. The wagon has a canvas cover in real life, but in the model you get the frame, which consists of four lateral inverted U-shaped supports and seven longitudinal ribs that slot into the grooves moulded into the hoops. That’s the model finished, unless you want to add two small supports to the front of the roof, which are shown in a drawing at the end of the instructions. These aren’t supplied, but can be made from styrene rod or wire quite easily if your references show they were fitted to your example. Markings It’s a truck in the British Army, so it’s going to be green. They also didn’t wear much in the way of decoration other than number plates and the occasional unit markings. From the box you can build one of the following: Europe 1945 Europe 1944 Decals are by ICM’s usual printers, which is a guarantee of good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. Conclusion ICM have been filling a lot of gaps in the British WWII softskin range, and this will likely be very welcome, finding a place in a lot of stashes. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  24. WWII Luftwaffe Airfield Set (DS4801) 1:48 ICM via Hannants During WWII the Luftwaffe operated from all manner of airfields, from rough temporary strips to fully furnished airfields with all mod cons of the time, including brick-built barracks and even a specially oversized bath for a visiting Hermann Göring. They often hosted numerous aircraft types at once, plus all of the attendant crew, in groundcrew and aircrew flavours. The Kit This is a boxed set of three kits that have been brought together to fit the theme, and includes a Messerschmitt Bf.109F-4 fighter (48103), a Henschel Hs.126B-1 Reconnaissance aircraft (48212), and a set of Pilots & Ground Crew (48082) to finish off the set. All of these kits have been released previously under their own individual codes, but in this compact box they represent excellent value and an exercise in convenience too. The kit(s) arrive in a small top opening box with ICM’s usual captive inner lid, and inside are three bags of sprues for the three kits. The Henschel has three sprues and two wing halves in grey styrene, a small clear sprue and decal sheet, the 109 has three in grey, one clear and a decal sheet, while the figure set is on a single sprue, each one also having their own instruction booklet and painting guide. They are all relatively modern toolings with good detail, engraved panel lines, and in the case of the figures, realistic sculpting and fabric drape. We’ve not reviewed any of these kits previously, so let’s get on with it. Henschel Hs.126B-1 This kit originated in 2010, so is of recent vintage and has plenty of detail included. Construction begins with the cockpit, which has plenty of parts, including a clear two-part instrument panel that is augmented with styrene details and is arranged around the floor panel with a rear bulkhead, rudder pedals and other controls, then the cockpit sidewalls are decked out with a substantial number of boxes, instruments, ammo cans and other parts that liven-up the interior. The gunner’s section of the cockpit is a more spartan affair with a rear bulkhead, simple seat and machine gun with concertina dump bag hanging from the breech. The fuselage can be closed up around the sub-assemblies once the engine mount is attached to the bulkhead behind, and a donut (not a real one) is inserted into the front ready to accept the engine later. A group of inserts are fitted around the front of the fuselage, and the top deck closes over the forward portion, then main wheels are made up either with or without spats and two-part wheels that are surrounded by a teardrop-shaped fairing for the spatted version. At the rear a single-part wheel, yoke and mudguard are inserted into the space under the tail, permitting the aircraft to stand on its own three wheels for the first time. The 126 has a large greenhouse canopy that affords the crew a good view of their surroundings, which is key to any recon bird. The gunner however isn’t given a canopy, so he’d better dress warmly! The pilot’s windscreen and canopy are separate parts, and are accompanied by a pair of handrails, one down each side. The engine is next, and a full rendering of the Bramo 9-cylinder radial engine is provided, from the bell-housing at the front, through the piston banks and out the back with the ancillaries. It is fitted to the donut at the front of the fuselage, then the cowling is assembled round it, after which the three-blade prop is built on the boss and secured in place with a ring that is covered over by a spinner. The wings are of the parasol variety to improve situational awareness of the crew further, totally supported by two large v-shaped struts and a set of cabane struts in front of the windscreen. All the flying surfaces are separate and have separate hinges, so can be fitted deflected, as can the rear feathers, which are supported by two struts each, almost parallel to each other. Markings You get a generous and disparate three markings options from the decal sheet, one more traditional with splinter uppers, one in a winter distemper, and the other in a North African sand camouflage. From the box you can build one of the following: 1.(H)/32, Finland, December 1941 4.(H)/23, Russia, Winter 1942 2.(H)/14, North Africa, 1941/1942 Decals are printed by ICM’s usual provider, which is a guarantee of good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. Messerschmitt Bf.109F-4 This kit harks from 2006, and while it isn’t the newest 109 in the world has all the parts you’d expect, although time has introduced a little flash here and there, but it’s always preferable to short-shot parts any day of the week. For a change construction begins with the DB601E engine, which is quite well-detailed and includes exhaust stubs and flame-guards over the top. The cockpit is straight-forward, based upon an L-shaped floor with the cannon breech between the pilot’s knees, the instrument panel supported on a panel projecting from the forward bulkhead. The clear gunsight, rudder pedals, control column and seat pan finish that off, then the engine is attached to the front by joining the bearers between the two sub-assemblies, with machine guns and ammo cans between them. With the addition of a trim wheel on the sidewall and some paint, the fuselage can be closed up around the completed interior. The elevators are each single parts, and are installed in their slots, then joined by a separate rudder that can be posed deflected. The fuselage is completed by fitting the four-part cowling around the engine, adding the windscreen with bullet-proof insert, fixed rear canopy and the opener, which has a set of head-armour installed inside. The lower wing is full width and the upper halves are glued to the top, then the wingtips are inserted into the newly formed slots. The wings are brought together with the fuselage, and underneath the nose the chin intake for the oil cooler goes in, and the two radiator baths are inserted into their underwing positions then the flaps are put into their tracks in the trailing edge. The narrow track main gear legs are each made up from strut, captive bay door and wheel, which are narrow enough to be moulded from a single part each. The tail wheel is a single part and slots into the rear under the tail, then it’s back to the front for the supercharger intake on the port side, and the prop with spinner and retaining ring. Markings Four markings options are supplied for the 109, again all pretty varied and colourful. From the box you can build one of the following: Ofw. Eberhard von Boremski, 9./JG3, Ukraine, May 1942 Hpt. Hans Philipp, Gruppenkommandeur of I.JG54, Siwerskaya (Leningrad area), March 1942 Lt. Hermann Graf, Staffelkapitan of 9./JG52, Rogan (Ukraine), May 1942 Lt. Heinrich Ehrler, Staffelkapitan of 6./JG5, Petsamo (Finland), July 1942 German Luftwaffe Pilots & Ground Personnel (1939-45) This set includes a combination of three pilots and four ground crew on one sprue, one of the former bearing more than a passing resemblance to Adolf Galland, complete with his customary moustache. The other officer is wearing riding trousers and boots, with his hands folded behind his back, while the third pilot is being helped into his parachute harness by one of the groundcrew. The other three figures are groundcrew in overalls, one standing with a toolbox, another with his hands out in front of him, while the final figure is on his knees working on something, screwdriver in hand. The instructions show the figures complete, and points out parts and painting suggestions for each one. The paint codes are referenced in a table overleaf using Master Model colour codes and colour names in English and Ukrainian. Conclusion A compact and bijou boxing that is full of modelling fun. The Henschel is the better of the two kits, and the inclusion of the figures is a bonus. Make sure you have enough gloss black in stock for Mr Galland’s perennially slicked back hair. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
  25. le.gl.Einheitz-Pkw.Kfz.4 (35584) 1:35 ICM via Hannants Made mostly by three German companies, this all-wheel drive staff car designed by Stoewer was produced with different bodies during the early war, the most prevalent being the four-seat staff car, although it was used in other roles, notably the mobile light anti-aircraft units that were fitted with a twin MG34 mount for deployment, as depicted here. It was however complicated and unreliable, so was eventually replaced by the ubiquitous Kubelwagen. The Kit The box contains seven sprues in grey styrene plus a single clear sprue and decal sheet, with two sets of instructions with integral painting guide at the rear of the larger one. This is a re-box and amalgamation of the staff car with their recent Zwillingssockel 36, plus a few extra parts on new sprues that helps merge the two together into the completed vehicle. New Sprues Gun Sprue The chassis is first to be built up with dual springs supporting independent suspension and a driveshaft linking the two transfer boxes, plus the steering linkage front and rear. Fuel tank and stowage are placed to either side of the chassis rails and an exhaust pipe is threaded through to the engine compartment, which is filled with a full rendering of its 4-cylinder 2 litre Stoewer power plant over the front axle. The floor of the cab is built up and added to the chassis, then the three-part styrene wheels with moulded-in tread are fitted to each corner along with the radiator at the front. The firewall and a new rear passenger bulkhead are installed next with the former having instruments and transmission tunnel moulded in and pedals attached to the floor. The cab sides, boot/trunk cover, engine cowling and gear shifter are all put in place before the seats are built up from base, cushion and curved back in the front, with a large tread-plated area for the gunners that has just enough room down the sides for spare ammo cans in racks lining the lip. Two rifle points are attached to the front bulkhead, bumpers/fenders and doors are all added with steering wheel, and windscreen also made up between the front and rear compartments with tripods racked on the rear deck of the vehicle. The rear light cluster is fitted to the rear quarters with a spare wheel in between them, and the folded canvas roof above the divide between compartments. Front lights and pioneer tools are attached to the fenders, and windscreen wipers are fitted into the depressions on the frame, with wiper-motor boxes moulded into the frame for completeness. The lights and windscreen all have clear parts so the passengers don't get bugs in their teeth. The guns are built on a separate instruction sheet, and the completed assembly is shown in the main instructions being dropped into place in the rear fighting compartment. The Gun The ammo cans are made up first, joined to the twin frame, which then has the gun mounts fitted on top. The guns are still fitted with their bipods, which along with the breech cover are moulded separately to the rest of the guns. If you’re a detailer, you may want to drill out the muzzles very carefully with a tiny bit in a pin vice. With the guns on their frame, the outer frame is fitted around it in two halves, slotting into the pivot points moulded into the frame, and supported by a cross-brace lower in the frame. Another bracing strut fits across the front and has a canvas brass catcher curtain suspended beneath it that is attached to the tube by a series of rings moulded into the part. The conical base is built from two parts and inserts into a socket in the underside of the outer frame, then it’s a case of making up the seat that fits at the very rear of the outer frame, and choosing the correct sighting part for your chosen pose, pivoting the guns to an appropriate elevation during the process. A pair of scrap diagrams shows the two finished poses, and overleaf is a painting guide in greyscale that could be a tad confusing as it has no paint call-outs on the two greyscale profiles. Markings There are three theatre specific options included in the box with early war Panzer Grey the colour of choice. For whatever reason, my scanner had trouble with the grey, so please accept my apologies for the lower than usual standard of the profiles. From the box you can build one of the following: Luftwaffe Ground Units, Greece, 1940 1st Panzer Division, Greece, 1941 11th Panzer Division, Eastern Front The decal sheet is small and printed on a bright blue paper, with good register, sharpness and colour density. Conclusion It’s nice to see these more unusual kits being made from adding existing kits together with a few additional parts to create something new. Detail is excellent, and it’s a cool little early WWII vehicle. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
×
×
  • Create New...