Search the Community
Showing results for tags 'ExtraTech'.
Ilyushin IL-62 is probably one of the most successful Soviet built intercontinental airliners. The plane carried max. 186 passengers to a max. distance of 10.000 km. Its maiden flight took place in January 1963 and a total of 292 planes were built during the years. Its main operator were Aeroflot and it was also the biggest plane used by Interflug, the East German state airline. The company operated a total of 24 planes. IL-62 was also widely used by many other Soviet block airlines. Ilyushin IL-62's were in use until the early 2000 but because of stricter noise regulations and new and more economical plane types they went almost totally out of commercial traffic. The only airline still using the plane for domestic tourist flights are Air Koryo of North Korea. I built the Interflug IL-62M from a Zvezda 1/144 kit with BOA decals I ordered from the web. I also used a photoetch set from Extratech. The Zvezda kit was of very high quality, very detailed and its fit was excellent. I primed the fuselage with white Tamiya Fine Surface primer which I then sprayed with Tamiya rattle can gloss varnish. The lower part of the fuselage, the wings and stabs were painted with Xtracolor X137 light gull grey. For the smaller details, wheels, lights, etc. I used Humbrol enamels and Vallejo acrylics.
Decided to break out the 1:72 Concorde and have a go at taming the beast. I've Read so many accounts of it being a difficult kit I thought it was time to have a go and see what I thought. I also fancy having a Concorde in the cabinet. I bought an Extratech photoetch sheet a few years back from the Czech Republic (Llona Mullerova). I also bought an transparency mask and a weighted wheel set from Hannants a while back. The story so far... Started the engine bays to be finished later. The instructions say the darker areas are either Hu85 or Hu53 but I'm inclined to think it's more of a dark metallic (was it titanium?). I may opt for a dark Alclad and then do lots of panel variations. These things will go on towards the end and I'll probably pick some supplies up at Telford (for it is not all that far away!) The Extratech photoetch, one of two sheets. Looks to be very well made. Weighted resin wheels for later. Look much better than the rubber jobs it must be said....now where's my razor saw?
Hello and thanks for your interest, here's another Lavochkin La-5FN from Kovozavody Prostejov. "Yellow 8" was flown by pilot P. Rakov in summer 1944 (according to kit instructions). I used photoetch parts (for dashboard, seatbelts and landing gear covers) from an old Extratech set. Photographs by Wolfgang Rabel.
I did it again. I bought one of these expensive ExtraTech pig-in-a-poke aftermarket stuff. This time for the AMT/Italeri XB-70 Valkyrie. "Pig in a poke" because it is next to impossible to get any information of what detail enhancements the ExtraTech sets provide. I had the same issue with their Concorde set (reviewed here:http://www.britmodeller.com/forums/index.php?/topic/234949458-concorde-etch-set-172-extratech/) before but as I was rather pleased with this I waited for a good opportunity to get the XB-70 set as well. Here we go: Included are these two pieces of etch sheets: The instruction sheet is two pages of rather simple copy paper: As you can see the following areas are addressed: - intake - exhaust area (only inside detail - but no exhaust cones - the kit ones are poorly detailed and too small) - under carriage - U/C doors - wheels - various vents Edit: What I miss here are the various antennas of the XB-70 and what would have been very nice: A windscreen frame (under the visor similar to the Concorde - the windscreen is missing in the kit) and a visor frame, so the clear parts could be added with clear sheet. Armory also offers an etch set for the Valkyrie (reviewed here: http://www.britmodeller.com/forums/index.php?/topic/234938609-xb-70-valkyrie-172-exhausts-by-armory/?hl=valkyrie) which includes new exhaust cones (which really make a different!), various vents (same as the ExtraTech set, so you will have some double if you buy both sets) and the lightend "end plate" above the exhausts (again this is the same part included in the Extratech set). If you want to dress up your Valkyrie I can recomment the Armory set noted above and only suggest the ExtraTech set as a second set which will add further less obvious (than the exhaust cones and vents) details. As the Extratech set is rather expensive (IMHO the price is 50% too high compared with other offerings from other manufacturers) for what additional details you get only die-hard Valkyrie maniacs will probably buy this. But for these I can recomment it :-) Rene