Search the Community
Showing results for tags 'Empire Strikes Back'.
Found 4 results
Hi all. After some problems with the snow used in this small scene (that of AK) and changing the base for a larger one, I can show the work completely finished. For those who want to see the work done on the ships the links are: I have finished it in a month and a half, without messing with any other model in between which is a double achievement on my part. For the short time that I took to do it and because between the beginning and the end I have not taken a different model. Bandai kits related to the Star Wars saga totally and absolutely recommended. I have done some more and I have many others. From the first I can say the same and from the second I can say that the detail is equally impressive. The only but is its price. Even on the other side of the world it is high, here it is simply prohibitive for a normal pocket. Regards.
Hi all. This kit was given to me by a friend to accompany the AT-AT also from Bandai to 1/144 on the scene, diorama or vignette that I am doing about the battle of Hoth of The Empire Strikes Back. It is really simple, so much that it does not carry a passenger compartment. Like the rest of the ships at this scale produced by Bandai: Wing A, X and Y. The Staples. Normally I do not usually put pictures of them since rarely the detail of the pieces can be observed correctly in them and they only serve to see their distribution. But in this case it can be done, although it has really been to show the few pieces of which it consists. Honestly, I think they could have done something of the cabin, minimal but existing, even if it didn't look much anyway. At AT-AT, where it is virtually impossible to see I think they have solved it magnificently, as well as their pilots (considering the scale). A pity that the crystals in this model have to be painted black. I finished riding in about 30 minutes. As the coin is widely seen I have put a cigarette lighter as a reference. Anything known is worth it. As it will not be placed on the base provided by the kit I have closed the hole in the bottom. For this I have used the bumper of the black plastic piece that must go in place. Once the macro has been applied, I observe that I will have to use putty diluted in acetone to cover some small hole in the bottom where the glue has not been enough to convert the joint of pieces into a panel line and review a section in which the molten plastic has covered. Really natural almost no difference can be seen between panels. I could not resist "improving", even minimally, what the kit offers so I took the scriber and distributed some "screws" through the panel lines. I have taken more into account the logic and its possible placement than a specific reference. After all, it is about trying to visually enrich it one more point, if that is possible. The stupid thing about it is that I have not thought of having the 1/48 kit as a reference, which I also have. In search of the base color. The friend with whom I maintain this duel made me the point that although both the AT-AT and the Snowspeeder have a light gray color it is not exactly the same. Regarding this, it was clear that the AT-AT would carry the mixture proposed by Bandai, after making it and appearing appropriate. However, regarding the Snowspeeder I had doubts because it should be a light gray that differs from the AT-AT gray. Looking at the range of light gray that I have, which is quite abundant, I stayed with two: Gunze H-338 and a mixture that I made in his day for a Mirage F.1M. I have finally airbrushed the gray of the F.1M. Next, I masked to apply with Gray the identifying stripes of Luke's Snowspeeder as that of the Squad Leader, unlike the rest that are red. With a liquid mask and later with a brush I have made chunks in the ligth gray. I keep painting the gray identification bands at the bottom. In the upper one there are some marks in red that the kit brings in decals. I prefer to use Vallejo red, somewhat lowered with yellow, and paint them with a brush. As the gray color that I used for the Squad Leader marks seems a bit dark (I think I should have used Neutral Gray XF-53 or similar) I decide to “lighten it up” a bit and how to mask again I don't feel like laborious. I decide to apply the very diluted base color on the dark gray to lighten it. After the experience of the screws this time I use the instructions of the kit at 1/48 as a reference and apply the base color slightly darkened in some panels. The fouling of the model has been to apply different shades of Vallejo brown in the form of filters, some lighter and others darker. The chipping has been with a mixture of gray and black, although I usually do it with one of brown and black. As I progressed, it seemed to me that I was short. However, once finished and looking at the photos, because in person it did not give me that feeling so much, it seems to me that I have passed. It is true that these ships "had" a very neglected appearance, but I would have liked to leave it with a not-so-carried appearance. The next step has been to varnish in gloss, apply oil to highlight panel lines, place decals and varnish in matt. At this point, it is only the model left to place the harpoon launcher, which is already finished, and paint the crystals in black. I will show that in Ready for Inspection. Andrés.
Hi. I start another beautiful kit offered by Bandai for fans of the galactic saga of STAR WARS. Specifically the terrifying battle transport of the Empire called AT-AT. The general construction is advanced but until I have completed the cockpit I have not decided to start this post. I certainly believe that it has been a useless and stupid effort because even if you want to see something of what is inside, even using a flashlight, it is impossible. But as I paid for it, I decided that I had to do it. So here I show you: poorly painted, whith Vallejo MC, and worse photographed. I hope to put some progress soon as, as I say, the construction phase is advanced. Regards. Andrés.
Star Wars AT-AT Detail Set (03117 for Bandai) 1:144 GreenStrawberry Star Wars and AT-ATs are synonymous to a person of a certain age (self included), and Bandai's recent release of a raft of new kits has been great for anyone wanting to build a collection of Star Wars related models in a couple of consistent scales, rather than box-scale as seems to be the way with Revell, the main European license holder of late. The Bandai kits are snap-together, but don't let that fool you. They are the pinnacle of the injection-moulded art, and you'd wonder initially how they could get any better with the addition of Photo-Etch (PE) parts. These sets from GreenStrawberry are engineered to appeal to the more advanced modeller who will end up painting their creation, and you WILL need Super Glue (CA) to attach the parts to your model. The sets arrive in a flat re-sealable pack, with a black themed backing card, a chunk of thick cardboard to keep the PE safe, a set of instructions (both of which are hidden within), and the sheet of PE brass on display in the front. They are designed to improve both detail, accuracy to the scale/CGI models, and add a scale-thickness to otherwise over-scale parts. The kit cockpit is first to be upgraded, with controls, a central column and details within the cab that are missing on the kit, and should be visible through the visor once completed. Staying with the head, the cheek cannons are fitted with curved "ammo feed" assemblies, and the visor/windscreen is upgraded with a frame to finish it off. The rear of the walker shows off its kit-part heritage with a quartet of 20/40mm flak shields amongst the greeblies, which are all replaced by much more detailed and accurate PE parts that give it a scale thickness unachievable with injection styrene. A raised panel that overhangs the back is also replaced with a thinner PE assembly too, and at the front of the "hump" a triple-layer of PE is inserted into the upstand to better reflect the intake that is present. Each of the feet has a PE skin applied to the curved back/forward pivot, and a curved triangular end cap added the lateral pivot points, while the last section gives a nod to the diorama potential of this awesome model. The Bandai kit includes side access doors that cover up an entrance and plenty of greeblies, which are lost forever if you snap the covers in place. With the removal of the internal fixtures, new frames and hinges are added, allowing the modeller to pose them open with convincing detail on display instead of blank plastic. Anyone fancy building a screen projector on Endor? Conclusion While the snap-together nature of the kit does no justice to the level of detail included in the box, this small but useful set will improve the finished model no-end, as long as you're ready with the glue and paint to integrate and weather the finished article. Very highly recommended. Review sample courtesy of