Search the Community
Showing results for tags 'Cobra'.
-
After the 1/72nd kits (link) Special Hobby is reported working for 2020 on a 1/48th Bell AH-1G Cobra/Sea Cobra family. Info obtained from a Special Hobby representative at IPMS Belgium National/Plastic & Steel 2019. To be followed. V.P.
- 57 replies
-
- 10
-
- Special Hobby
- Cobra
-
(and 1 more)
Tagged with:
-
Release expected in late November by Trumpeter, a 1/35th - ref. 05116 - Bell AH-1W Super Cobra kit Source: http://www.trumpeter-china.com/index.php?g=home&m=article&a=show&id=289 Box art V.P.
-
One of my favorite helicopters. I did a W variant a few years ago, which is an addition to the future collection of AH-1s. The kit was fantastic and a pleasure to build. I wish all the kits were this fun. Since the kit was supplied with only Spanish and Israeli decals, and I really wanted the machine from Vietnam, I've used some spare decals from other helicopters from that era (so some sizes and numbers are not quite correct)
- 14 replies
-
- 53
-
Hot(tish) on the heels of the Mirage IIIC, I have finally finished this AH-1G Cobra. A little gem of a kit partly let down by stencils that are prone to silvering. I decided to add some PE, air intakes from BrenGun and bring some home-made improvements but it would really build nicely OOB. The WIP is there: I chose to build "the Gladiator" from C/16 Cav. at Can Tho in 1970. Not that I like movies about gladiators but the sharkmouth, red panels and black tailboom top bring some variety to the OD scheme. For once, I am rather pleased with the pictures: As usual, I am open to constructive criticism and do not hesitate to let me know if you spot anything wrong
- 18 replies
-
- 59
-
After the AH-1Z Viper (link), Dreammodel is to release a Bell AH-1W Super Cobra - late version - kit - ref. DM720017 Sources: https://www.facebook.com/story/graphql_permalink/?graphql_id=UzpfSTk4MzQ5ODQ2NTExNDA4MDoyNTcyNDcyNDEyODgzMzM2 https://www.1999.co.jp/eng/10896723 https://www.super-hobby.fr/products/Bell-AH-1W-Super-Cobra-47631540.html V.P.
- 35 replies
-
- 5
-
- AH-1
- Dreammodel
-
(and 1 more)
Tagged with:
-
Helicopter Ground Personnel – Vietnam War (53102) 1:35 ICM via H G Hannants Ltd There has been a spate of new helicopter kit releases in 1:35, many of them from ICM themselves, including their CH-53 Tarhe “Skycrane” and their AH-1 Cobra series that’s ongoing, and appears to be the focus for this figure set, although other kits could well use them in different positions. This set arrives in a top-opening box with ICM’s usual captive flap on the bottom tray, and inside is a single sprue of grey styrene, a glossy instruction sheet that’s printed on both sides in colour, and a flyer for their acrylic paint range that debuted some time ago. There are four figures supplied on the sprue, two of whom are standing to inspect their charge, one leaning over for a better view. The other two are kneeling or sitting, the kneeling gentleman inspecting something low down, while the other chap is sitting atop a winglet on the box top, screwdriver in hand, contemplating his next move in repairing or maintaining the engine compartment he has open. This last figure is the most kit-specific, but could easily be re-tasked by adding a box or platform of suitable height under his backside to give his stance some support. The parts for each figure are found in separate areas of the sprue for ease of identification, and parts breakdown is sensibly placed along clothing seams or natural breaks to minimise clean-up of the figures once they are built up. The sculpting is typically excellent, as we’ve come to expect from ICM’s artists and tool-makers, with natural poses, drape of clothing and textures appropriate to the parts of the model. Seamlines and stitching have been engraved into the surfaces, making detail painting easier, and more rewarding to the eye. Markings There are no decals provided, but over the page from the sprue diagram and paint chart are four drawings of the figures in colour, with part numbers supplied in black, and paint codes in red boxes that correspond with the chart and give codes for ICM’s own paint system, plus the generic name of the colour in question. It also lets us know that ICM’s acrylic boxed set #3023 can be used to paint the figures, which you can find in our mega review, scrolling down to the appropriately numbered set. Conclusion I’ve worn out my keyboard saying that figures provide a much-needed human scale to a model, but whilst that remains true, I’m hardly going to tell you otherwise. Excellent sculpting and natural poses make this a compelling set for anyone in the market for figures for their 1:35 helicopter. Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
-
V.P.
-
Bell AH-1G Cobra Carrera Revell 1:32 (03821) Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for pans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The Kit This is a brand new kit from ICM, which is reboxed here by Revell. The quality of the moulding is first rate from ICM with fine engraved panel lines and nice rivet detail on the tail boom and tail. While this boxing is the the early G you can see from the sprues that other versions will be along as there is the opposite handed tail, different landing skids, an upturned exhaust, different winglets and TOW missiles on the weapons sprures. The kit arrives on 5 main sprues of grey plastic and a clear sprue. As well as the main helicopter and armaments, the kit also comes with the ground handling attachments for the skids, something often missing from kits. While there is good detail on the kit and the option to open up the engine and gearbox area, this area is not massively detailed and will open itself up for the super detailer if they want. Work starts conventionally in the cockpit. The two five part armoured seats are built up and added into the main cockpit tub. Tail controls are added to the floor ,and for the pilots station a cyclic and collective columns go it. For the front seater the weapons control column is made up ad fitted in. Side controllers are also fitted for the gunner. Instrument panels and coamings go in for both stations with instruments being provided as decals. Now the cockpit is complete the visible parts of the engine/gear box and its compartment are built up. This is followed up by parts for the rotor controls. The tails are added onto the fuselage. Here there is quite a large part which overlaps to compete a good solid join. The tail rotor needs attaching to fuselage half before closing up if you want it to move. The engine / gear box parts are fitted into the right fuselage followed by the cockpit and cockpit rear bulkhead parts. The fuselage can now be closed up with additional cockpit armour panels being fitted at each side. At the rear of the engine housing the exhaust part goes in. At the front of the helo the nose goes on, being careful to choose the right parts for the decal option being modelled. Turning things over the large central fuselage insert goes on with additional parts at the nose. The chin turret is now fitted with either one or two miniguns depending on your decal option. A light goes behind the turret. The final exhaust ring goes on the back and the tip of the tail is added. Next up we concentrate on the stub wings. The two wings are built up and the weapons pylons are fitted. These are fitted to the fuselage along with the rear stabilisers towards the tail. The landing skids can then be fitted. Next up the large clear canopy parts go on. A sight is fitted to the front of the central glazing section. The front and rear large side canopy parts are fitted, these can be open or closed as need by the modeller. The access panels can be fitted to each side of the open engine/gear box area; again these can be open or closed as required. We now move to the main rotor. Each of the two blades are split upper/lower, and they are joined together. The central rotor head is made from tow parts, these are upper and lower, these sandwich in the rotor blades. Once these are on the control arms to the swashplate are then added along with the central mounting shaft. The rotor this then mounted. To finish off armaments can be added to the pylons as needed. The kit provides Two M157 7 shot rocket pods, two M158 7 shot rocket pods, two M200 19 shot rocket pods; and two M18 minigun pods. If the modeller want to use them then two pairs of ground handling wheels can be made up and attached to the back of the skids, Towing bars then can be attached to the front of the skids. Decals The decal sheet is from Cartograf so there will be no issues with it. Revell give us two options; 68-17054 C Battery, 2nd Battalion, 20th Aerial Rocket Artillery (C/2/20 ARA) Call sign Blue Max. US Army, Vietnam 1971 AH-1G (Early) VT-7, Marine Light Attack Helicopter Sqn 367 (HMLA-367) Call sign Scarface, USMC, Vietnam 1970 (As per the box art) Conclusion This is great kit and even in 1.32 will not take up a large amount of space. Highly recommended. Carrera Revell model kits are available from all good toy and model retailers. For further information visit or
-
Kovozávody Prostějov (KP) is to rebox in March 2023 the AZmodel 1/72nd Bell AH-1G Cobra kit. https://www.modelarovo.cz/novinky-kovozavodu-prostejov-a-azmodel-na-brezen/ - ref. KPM0378 - Bell AH-1G Huey Cobra - Late https://www.kovozavody.cz/produkt/bell-ah-1g-huey-cobra-late/ - ref. KPM0379 - Bell AH-1G Huey Cobra - Early" https://www.kovozavody.cz/produkt/ah-1g-huey-cobra-early/ - ref. KPM0380 - Bell AH-1G Huey Cobra - International https://www.kovozavody.cz/produkt/ah-1g-huey-cobra-international/ - ref. KPM0381 - Bell AH-1G Huey Cobra - Special Markings https://www.kovozavody.cz/produkt/ah-1g-huey-cobra-special-markings/ V.P.
-
AH-1G "Arctic Cobra" (48299) 1:48 ICM via H G Hannants Ltd Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for plans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The AH-1G could be fitted with the The M-35 Gun System, this was a single M195 20mm cannon (a short-barrelled version of the six-barrel M61A1 Vulcan) on the port inboard pylon of the AH-1G. 950 rounds of ammunition were stored in boxes faired to the side of the aircraft. The system was primarily pilot controlled, but featured dual controls to be either pilot or gunner controlled. For this purpose the pilot was provided with a M73 sight. Some Cobras were tested by the US Army in low temperature conditions in Alaska. These were painted white with Arctic Red markings, these were known as Arctic Cobras. The Kit This is a recent tool from ICM & Special Hobby and brings us a long-overdue update to some of the older kits of the type on the market. This edition depicts airframes used in Alaska,. Inside the bag are eleven sprues in various sizes in grey styrene, a large clear sprue with a choice of canopies for upcoming versions, a decal sheet and their usual glossy A4 instruction booklet with spot colour throughout, and colour profiles of the decal options in the rear. Detail is excellent, as we’ve come to expect from ICM, especially in the cockpit, the exterior surface and the rotors, and the instruction booklet takes you through the build process with colour and scrap diagrams used to clarify the process. Construction begins with the cockpit, which will be highly visible through the crystal-clear canopy parts, and this starts with the twin tub (no, not a 60s washing machine), into which the quilted rear bulkhead, twin pilot controls and tail rotor pedals are fitted, followed closely by a pair of instrument panels with decals and deep coamings to reduce glare coming though the big canopy panes. The panels are different for front and rear crew, but their seats are very similar with armoured wings and sides on the cushioned seat, made of four parts each. Remarkably quickly we’re starting prep of the fuselage halves by drilling out a number of holes, adding the nose cone and tail fin, taking care to align them carefully as well as choosing the right one, as there are two tails on the sprues. The rotor-head is installed on a flat plate, allowing the head to rotate if you’re careful with the glue, then it is inserted into the fuselage along with the cockpit tub and the short exhaust trunk, closing it up and leaving it to set up so you can deal with the seams, and fill a small hole near the rotor head. With that done, the cockpit is outfitted with more armour panels on the internal sidewalls and on the port side exterior, adding a number of appliqué panels in two parts. The underside of the fuselage is bereft of detail until you add the two armoured panels under the cockpit, and glue an insert into the hole in the underside after drilling out a pair of holes from within for one variant. Two main intakes above that slot into recesses on the fuselage sides. The Cobra has wings! Little ones that are essentially weapons carriers, and these both have a separate wingtip and root mounted ammo pod under each one, the port pod later feeding the M35 gatling gun and a link between the starboard and port pods. At the rear you have a choice of two styles of tail stabilisers, one covered in rivets, the other nice and smooth. Speaking of the tail, the boom is covered in nicely rendered raised rivets, as is correct for the type. Two pylons attach to the underside of the winglets, one in the tip, another fitting into two holes. The short circular exhaust ring is installed at the open end of the trunking, with two small strengthening plates just underneath them. With the fuselage flipped on its back, the nose turret is next, with a pair of inserts added into the main turret part, and a 7.62mm gatling gun in one aperture, plus a 40mm grenade launcher in the other that you’ll need to drill out the muzzles on if you feel the urge. The very tip of the nose cone is separate, and has a pitot probe added near the top, then it’s time to add a few antennae and clear lights, plus the BIG gun, which has a separate hollow muzzle part, ammo feed and two other small parts, which is suspended from the underside of the port winglet, and linked to the ammo pod as mentioned earlier. The skids with the thicker supports and a whip-like safety skid under the tail finish off the main fuselage for now, after which the rotating parts are made. The Cobra had a twin-blade tail rotor that slots straight into a hole in the top of the tail fin, with an M-shaped control mechanism fixed to the centre, and a couple of clear parts added to fairings nearby. The main rotor sits on a chunky axle, over which a faceted washer slides, that is joined to the base by a pair of actuators. The two main blades are moulded as a single item, and are first detailed with additional parts before they are glued to the top of the drive-shaft, and supported by a pair of long control rods linked to the blades to adjust their incidence. A scrap diagram shows the various parts in grey to help you get everything correctly aligned. It is lowered into the top fairing later and glued into place, but first the canopy is completed. The Cobra’s canopy opens on different sides for each crew member, and has the long narrow top is fixed first, with the windscreen moulded-in. A small instrument is glued to the side of the screen, 3.5mm up from the bottom, after which it is glued onto the fuselage. The pilots exit from opposite sides, so after the sloped starboard section and port rear section are fixed in place, the two openers can be mounted in the open position and supported by props to achieve the correct angle for them. In addition to guns the Cobra could carry rocket pods, and two each of the seven-shot M157, M158 and four of the 19-shot M200 pods are included on separate sprues, the M157 & M200 pods cylindrical and with detail inserts in both ends. The bare tubed M158 pods have two ends, a central section and a curved cover at the top that is attached to the pylon. The final assembly is the optional towing equipment pack. This consists of a pair of graft-on wheels that attach to a pair of pegs on the upper rear of the skids, lifting them off the ground, and a pair of towing bars that also have castors near the skid-end to facilitate movement when they’re off the airframe. The bars attach to the front of the skids, then it’s down to you to find a suitable towing vehicle if you wish. Markings The decal sheet is in house from ICM, the decals look thin, in register and have minimal carrier film. 3 Options are included; 69-16440, Elmendorf AFB, Alaska 1975 67-15767, 120th Aviation Co. "Artic Knights", Fort Richardson, Alaska 1973 66-15250, Fort Richardson, Alaska 1968 Decals are printed by ICM’s usual partners, with good registration, sharpness and colour density, with a thin gloss carrier film cut close to the printed areas. Conclusion Another great Very highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
-
ICM is to release 1/32nd Bell AH-1G Cobra kits - ref. 32060 - Bell AH-1G Cobra (early production), US Attack Helicopter - released Source: https://www.hannants.co.uk/product/ICM32060 - 1/32 - ref. 32061 - Bell AH-1G Cobra (late production), US Attack Helicopter - released Source: https://www.hannants.co.uk/product/ICM32061 - ref. 32062 - Bell AH-1G Cobra with Vietnam War US Helicopter Pilots - released Source: https://www.hannants.co.uk/product/ICM32062 Special Hobby boxing - ref. SH32082 - Bell AH-1G Cobra "Early Tails over Nam" V P.
-
Has anyone built any of the new(ish) AZ 1/72nd Bell AH-1G Huey Cobra series of kits? A search of Google didn’t bring up any worthwhile comments – have I missed any reviews? Many thanks
- 36 replies
-
- helicopers
- AH-1G
-
(and 2 more)
Tagged with:
-
AH-1G Arctic Cobra ICM 1:32 (32063) Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for plans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The AH-1G could be fitted with the The M-35 Gun System, this was a single M195 20mm cannon (a short-barrelled version of the six-barrel M61A1 Vulcan) on the port inboard pylon of the AH-1G. 950 rounds of ammunition were stored in boxes faired to the side of the aircraft. The system was primarily pilot controlled, but featured dual controls to be either pilot or gunner controlled. For this purpose the pilot was provided with a M73 sight. Some Cobras were tested by the US Army in low temperature conditions in Alaska. These were painted white with Arctic Red markings, these were known as Arctic Cobras. The Kit This is a brand new kit from ICM, and their first helicopter kit. The quality of the moulding is first rate from ICM with fine engraved panel lines and nice rivet detail on the tail boom and tail. While this boxing is the the early G you can see from the sprues that other versions will be along as there is the opposite handed tail, different landing skids, an upturned exhaust, different winglets and TOW missiles on the weapons sprures. The kit arrives on 5 main sprues of grey plastic and a clear sprue. As well as the main helicopter and armaments, the kit also comes with the ground handling attachments for the skids, something often missing from kits. While there is good detail on the kit and the option to open up the engine and gearbox area, this area is not massively detailed and will open itself up for the super detailer if they want. This boxing comes with an additional sprue for the M-35 Gun System. Work starts conventionally in the cockpit. The two five part armoured seats are built up and added into the main cockpit tub. Tail controls are added to the floor ,and for the pilots station a cyclic and collective columns go it. For the front seater the weapons control column is made up ad fitted in. Side controllers are also fitted for the gunner. Instrument panels and coamings go in for both stations with instruments being provided as decals. Now the cockpit is complete the visible parts of the engine/gear box and its compartment are built up. This is followed up by parts for the rotor controls. The tails are added onto the fuselage. Here there is quite a large part which overlaps to compete a good solid join. The tail rotor needs attaching to fuselage half before closing up if you want it to move. The engine / gear box parts are fitted into the right fuselage followed by the cockpit and cockpit rear bulkhead parts. The fuselage can now be closed up with additional cockpit armour panels being fitted at each side. At the rear of the engine housing the exhaust part goes in. At the front of the helo the nose goes on, being careful to choose the right parts for the decal option being modelled. The side applique armour panels can be fitted to the model if needed as these parts are marked as optional. Turning things over the large central fuselage insert goes on with additional parts at the nose. The chin turret is now fitted with either one or two miniguns depending on your decal option. A light goes behind the turret. The final exhaust ring goes on the back (if modelling option 3 then the anti IR upturned exhaust is fitted) and the tip of the tail is added. Next up we concentrate on the stub wings. The two wings are built up and the weapons pylons are fitted. These are fitted to the fuselage along with the rear stabilisers towards the tail. The landing skids can then be fitted. Next up the large clear canopy parts go on. A sight is fitted to the front of the central glazing section. The front and rear large side canopy parts are fitted, these can be open or closed as need by the modeller. The access panels can be fitted to each side of the open engine/gear box area; again these can be open or closed as required. We now move to the main rotor. Each of the two blades are split upper/lower, and they are joined together. The central rotor head is made from tow parts, these are upper and lower, these sandwich in the rotor blades. Once these are on the control arms to the swashplate are then added along with the central mounting shaft. The rotor this then mounted. To finish off armaments can be added to the pylons as needed. The kit provides Two M157 7 shot rocket pods, two M158 7 shot rocket pods, two M200 19 shot rocket pods; and two M18 minigun pods. If the modeller want to use them then two pairs of ground handling wheels can be made up and attached to the back of the skids, Towing bars then can be attached to the front of the skids. If fitting the M-35 Gun System then one of the pylons is left of the left stub wing as the gun fits directly to the inboard station here. The two large ammunition panniers fit to each side of the fuselage. A cross feed links the two sides at the front, and at the rear the feed to gun itself goes on. Decals The decal sheet is in house from ICM, the decals look thin, in register and have minimal carrier film. 3 Options are included; 69-16440, Elmendorf AFB, Alaska 1975 67-15767, 120th Aviation Co. "artic Knights", Fort Richardson, Alaska 1973 66-15250, Fort Richardson, Alaska 1968 Conclusion This is another great looking kit from ICM which great tooling and possibilities for future variants on the sprues. Very Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
-
This is the Hasegawa AH-1S in one of its JGSDF boxings. This is a very nice kit with some lovely surface detail and a good shape, moulded in a hard olive plastic that reminds me of some of Hasegawa’s older kits. The cockpit is a little bare so the interior was dressed up with a little plastic card and rod, and some seat belts from Tamiya tape. The exterior doesn’t need much attention but I used a set of Master barrels for the M-197 cannon, which are a nice addition. Camo is Gunze H320 green, Model Master FS30219 for the tan, and Tamiya NATO black. Decals are from the kit (I do like a sharkmouth!) and went on nicely, needing just a few nicks with a sharp knife to conform around the nose. After a bit of search around for a new photo hosting site when Village Photos stopped working, I followed a tip from @Markh-75 and went for Postimages. Let's hope this works for a while! Chris
-
AH-1G Cobra "Early Tails over Nam" Special Hobby 1:32 Hi Tech (32082) Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for pans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The Kit This is the brand new kit from ICM, to which Special Hobby have added Resin, 3D printed parts, photo-etch; and decals. This provides the experienced modeller with an all round package. The quality of the moulding is first rate from ICM with fine engraved panel lines and nice rivet detail on the tail boom and tail. While this boxing is the the early G you can see from the sprues that other versions will be along as there is the opposite handed tail, different landing skids, an upturned exhaust, different winglets and TOW missiles on the weapons sprures. The kit arrives on 5 main sprues of grey plastic and a clear sprue. As well as the main helicopter and armaments, the kit also comes with the ground handling attachments for the skids, something often missing from kits. While there is good detail on the kit and the option to open up the engine and gearbox area, this area is not massively detailed and will open itself up for the super detailer if they want. Work starts conventionally in the cockpit. The two new resin sets are added along with the resin seat cushions and PE seatbelts. Tail controls are added to the floor ,and for the pilots station a cyclic and collective columns go from the new 3S printed parts. For the front seater the weapons control column is again from the new 3D printed parts. Side controllers are also fitted for the gunner. Instrument panels and coamings go in for both stations with instruments being provided on the new PE sheet. Now the cockpit is complete the visible parts of the engine/gear box and its compartment are built up. This is followed up by parts for the rotor controls. The tails are added onto the fuselage. Here there is quite a large part which overlaps to compete a good solid join. The tail rotor needs attaching to fuselage half before closing up if you want it to move. Note for decal option D2 the tail rotor is on the opposite side from the others and both sides are in the kit. The engine / gear box parts are fitted into the right fuselage followed by the cockpit and cockpit rear bulkhead parts. The fuselage can now be closed up with additional cockpit armour panels being fitted at each side. The front armor panels for the cockpit are provided in resin with the cut out part to be used if you are opening the front cockpit. At the rear of the engine housing the exhaust part goes in. At the front of the helo the nose goes on, being careful to choose the right parts for the decal option being modelled. Turning things over the large central fuselage insert goes on with additional parts at the nose. The chin turret is now fitted with either one or two miniguns depending on your decal option. New resin barrels are provided in the kit. A light goes behind the turret. The final exhaust ring goes on the back and the tip of the tail is added. Next up we concentrate on the stub wings. The two wings are built up and the weapons pylons are fitted. These are fitted to the fuselage along with the rear stabilisers towards the tail. The landing skids can then be fitted. Note option D2 has different skids, these again being included in the kit. Next up the large clear canopy parts go on. A sight is fitted to the front of the central glazing section again this is provided in resin for this kit. PE and resin parts are included also for the central canopy part. The front and rear large side canopy parts are fitted, these can be open or closed as need by the modeller. The access panels can be fitted to each side of the open engine/gear box area; again these can be open or closed as required. We now move to the main rotor. Each of the two blades are split upper/lower, and they are joined together. The central rotor head is made from two parts, these are upper and lower, these sandwich in the rotor blades. Once these are on the control arms to the swashplate are then added along with the central mounting shaft. The rotor this then mounted. To finish off armaments can be added to the pylons as needed. The kit provides Two M157 7 shot rocket pods, two M158 7 shot rocket pods, two M200 19 shot rocket pods; and two M18 minigun pods. If the modeller want to use them then two pairs of ground handling wheels can be made up and attached to the back of the skids, Towing bars then can be attached to the front of the skids. Two new pods are also provided in resin as are wheels for ground handling. Special Hobby Extra Parts For this Hi Tech boxing Special Hobby have provided PE, 3D printed, and resin parts for the Cobra. There are also a full set of tape masks for inside and outside of the canopy (These are not shown). The PE is mainly front & rear instrument panels plus a full set of belts for both seats on a colour nickel fret. The brass fret contains engine bay panel grills, internal parts and mounting plates for the rocket launchers. The 3D parts include the a fire extinguisher, cyclic & collective sticks for the pilot, and the weapons system controls for the front seat. The resin part are both Seats complete with new cushions and a mounting base for the front seat. Other parts for the cockpit include the tail rotor pedals, side plates for the centre console, and the front cockpit armour panels. Showing attention to detail they even include the part which is hinged with the front canopy if you wish to position this open. There are new barrels for the chin turret, new wheels for the ground handling trolley, and new M158 7 shot rocket pods. The last major items being a pair of flight helmets to display in the cockpit if wanted. The resin & photoetch are up to Special Hobby's usual excellent standards and the inclusion of 3D parts is most welcome with some excellent items that normal resin might not make. Decals The decal sheet is in house from ICM, the decals look thin, in register and have minimal carrier film. 4 Options are included are the same as from their 1/72 kit, these are; A. 68-15183 C Battery, 2nd Battalion, 20th Regiment Aerial Rocket Artillery, Phuoc Vinh, Vietnam 1971. B. 68-15049 C Battery, 2nd Battalion, 20th Regiment Aerial Rocket Artillery, Bu Dop, Vietnam 1970 (Cambodian Invasion Markings) C. 66-15259 Cobra New equipment Training Team, Vung Tau, Vietnam 1967 (USAF Style SA Camo) D1. 68-15189 "Wretched Mildred" D Troop, 3rd Bridge, 4th Cav, Chu Chi, Vietnam 1971 D.2 68-15189 "Wretched Mildred" 1972, after suffering damage the airframe was rebuilt with a new tailboom, this one with the tail rotor on the right side. Conclusion This is another great looking kit from Special Hobby, combining the great kit from ICM with a whole host of extra parts.. Very Highly recommended. Review sample courtesy of
-
AH-1G Cobra with Vietnam War US Helicopter Pilots ICM 1:32 (32062) Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for pans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The AH-1G could be fitted with the The M-35 Gun System, this was a single M195 20mm cannon (a short-barrelled version of the six-barrel M61A1 Vulcan) on the port inboard pylon of the AH-1G. 950 rounds of ammunition were stored in boxes faired to the side of the aircraft. The system was primarily pilot controlled, but featured dual controls to be either pilot or gunner controlled. For this purpose the pilot was provided with a M73 sight. The Kit This is a brand new kit from ICM, and their first helicopter kit. The quality of the moulding is first rate from ICM with fine engraved panel lines and nice rivet detail on the tail boom and tail. While this boxing is the the early G you can see from the sprues that other versions will be along as there is the opposite handed tail, different landing skids, an upturned exhaust, different winglets and TOW missiles on the weapons sprures. The kit arrives on 5 main sprues of grey plastic and a clear sprue. As well as the main helicopter and armaments, the kit also comes with the ground handling attachments for the skids, something often missing from kits. While there is good detail on the kit and the option to open up the engine and gearbox area, this area is not massively detailed and will open itself up for the super detailer if they want. This boxing comes with an additional sprue for the M-35 Gun System. Work starts conventionally in the cockpit. The two five part armoured seats are built up and added into the main cockpit tub. Tail controls are added to the floor ,and for the pilots station a cyclic and collective columns go it. For the front seater the weapons control column is made up ad fitted in. Side controllers are also fitted for the gunner. Instrument panels and coamings go in for both stations with instruments being provided as decals. Now the cockpit is complete the visible parts of the engine/gear box and its compartment are built up. This is followed up by parts for the rotor controls. The tails are added onto the fuselage. Here there is quite a large part which overlaps to compete a good solid join. The tail rotor needs attaching to fuselage half before closing up if you want it to move. The engine / gear box parts are fitted into the right fuselage followed by the cockpit and cockpit rear bulkhead parts. The fuselage can now be closed up with additional cockpit armour panels being fitted at each side. At the rear of the engine housing the exhaust part goes in. At the front of the helo the nose goes on, being careful to choose the right parts for the decal option being modelled. The side applique armour panels can be fitted to the model if needed as these parts are marked as optional. Turning things over the large central fuselage insert goes on with additional parts at the nose. The chin turret is now fitted with either one or two miniguns depending on your decal option. A light goes behind the turret. The final exhaust ring goes on the back (if modelling option 3 then the anti IR upturned exhaust is fitted) and the tip of the tail is added. Next up we concentrate on the stub wings. The two wings are built up and the weapons pylons are fitted. These are fitted to the fuselage along with the rear stabilisers towards the tail. The landing skids can then be fitted. Next up the large clear canopy parts go on. A sight is fitted to the front of the central glazing section. The front and rear large side canopy parts are fitted, these can be open or closed as need by the modeller. The access panels can be fitted to each side of the open engine/gear box area; again these can be open or closed as required. We now move to the main rotor. Each of the two blades are split upper/lower, and they are joined together. The central rotor head is made from tow parts, these are upper and lower, these sandwich in the rotor blades. Once these are on the control arms to the swashplate are then added along with the central mounting shaft. The rotor this then mounted. To finish off armaments can be added to the pylons as needed. The kit provides Two M157 7 shot rocket pods, two M158 7 shot rocket pods, two M200 19 shot rocket pods; and two M18 minigun pods. If the modeller want to use them then two pairs of ground handling wheels can be made up and attached to the back of the skids, Towing bars then can be attached to the front of the skids. If fitting the M-35 Gun System then one of the pylons is left of the left stub wing as the gun fits directly to the inboard station here. The two large ammunition panniers fit to each side of the fuselage. A cross feed links the two sides at the front, and at the rear the feed to gun itself goes on. Decals The decal sheet is in house from ICM, the decals look thin, in register and have minimal carrier film. 3 Options are included; 68-17074 "The Gladiator", C Troop, 16th Cav, Can Tho, January 1972. 68-115031 "Pandora's Box", 238th AWC, Vietnam 1971. 68-15012" #1 Du Me Mi", F Troop, 4th Cav, Phu Bai, 1972. The first 2 carrying the M-35 Gun System. Now normally with ICM the decal and painting guides are quite clear, for some reason they are not for this kits, they are very dark and indistinct, a little bit of a let down. The Figures This is the set ICM previously released on its own, now bundled with the Cobra, which we all suspected they would do. There are two standing pilots and one sitting, though this third figure could also be a crew man. As well as the sprue for the figures there are two smaller sprues with flight helmets. As with all ICM figure sets the sculpting looks upto their usual excellent standards. Conclusion This is another great looking kit from ICM which great tooling and possibilities for future variants on the sprues, the inclusion of the figure is a nice move. Very Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
-
AFV Club is to rebox the Academy 1/35th Bell AH-1W Super Cobra under ref. AF35S21 Air Cavalry Brigade AH-1W Super Cobra NTS Update - R.O.C Army Aviation and Special Forces Command Three barrelled metallic 20mm gun Gun turret can be posed left or right / Up / down Resin parts to reflect the AH-1W late version Photo-etched sheets for the AH-1W late version The engine covers can be posed opened or closed The canopy can be posed opened or closed Including multiple air to land armed modes Brand new decal and painting instruction of ROCA Including opposing force painting instruction Sources: https://www.facebook.com/AFVCLUB.TW/posts/4224422977603189 https://www.facebook.com/AFVCLUB.TW/photos/pcb.4224422977603189/4224407220938098 V.P.
-
AH-1G Cobra (Late Production) US Attack Helicopter ICM 1:32 (32061) Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for pans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The AH-1G could be fitted with the The M-35 Gun System, this was a single M195 20mm cannon (a short-barrelled version of the six-barrel M61A1 Vulcan) on the port inboard pylon of the AH-1G. 950 rounds of ammunition were stored in boxes faired to the side of the aircraft. The system was primarily pilot controlled, but featured dual controls to be either pilot or gunner controlled. For this purpose the pilot was provided with a M73 sight. The Kit This is a brand new kit from ICM, and their first helicopter kit. The quality of the moulding is first rate from ICM with fine engraved panel lines and nice rivet detail on the tail boom and tail. While this boxing is the the early G you can see from the sprues that other versions will be along as there is the opposite handed tail, different landing skids, an upturned exhaust, different winglets and TOW missiles on the weapons sprures. The kit arrives on 5 main sprues of grey plastic and a clear sprue. As well as the main helicopter and armaments, the kit also comes with the ground handling attachments for the skids, something often missing from kits. While there is good detail on the kit and the option to open up the engine and gearbox area, this area is not massively detailed and will open itself up for the super detailer if they want. This boxing comes with an additional sprue for the M-35 Gun System. Work starts conventionally in the cockpit. The two five part armoured seats are built up and added into the main cockpit tub. Tail controls are added to the floor ,and for the pilots station a cyclic and collective columns go it. For the front seater the weapons control column is made up ad fitted in. Side controllers are also fitted for the gunner. Instrument panels and coamings go in for both stations with instruments being provided as decals. Now the cockpit is complete the visible parts of the engine/gear box and its compartment are built up. This is followed up by parts for the rotor controls. The tails are added onto the fuselage. Here there is quite a large part which overlaps to compete a good solid join. The tail rotor needs attaching to fuselage half before closing up if you want it to move. The engine / gear box parts are fitted into the right fuselage followed by the cockpit and cockpit rear bulkhead parts. The fuselage can now be closed up with additional cockpit armour panels being fitted at each side. At the rear of the engine housing the exhaust part goes in. At the front of the helo the nose goes on, being careful to choose the right parts for the decal option being modelled. The side applique armour panels can be fitted to the model if needed as these parts are marked as optional. Turning things over the large central fuselage insert goes on with additional parts at the nose. The chin turret is now fitted with either one or two miniguns depending on your decal option. A light goes behind the turret. The final exhaust ring goes on the back (if modelling option 3 then the anti IR upturned exhaust is fitted) and the tip of the tail is added. Next up we concentrate on the stub wings. The two wings are built up and the weapons pylons are fitted. These are fitted to the fuselage along with the rear stabilisers towards the tail. The landing skids can then be fitted. Next up the large clear canopy parts go on. A sight is fitted to the front of the central glazing section. The front and rear large side canopy parts are fitted, these can be open or closed as need by the modeller. The access panels can be fitted to each side of the open engine/gear box area; again these can be open or closed as required. We now move to the main rotor. Each of the two blades are split upper/lower, and they are joined together. The central rotor head is made from tow parts, these are upper and lower, these sandwich in the rotor blades. Once these are on the control arms to the swashplate are then added along with the central mounting shaft. The rotor this then mounted. To finish off armaments can be added to the pylons as needed. The kit provides Two M157 7 shot rocket pods, two M158 7 shot rocket pods, two M200 19 shot rocket pods; and two M18 minigun pods. If the modeller want to use them then two pairs of ground handling wheels can be made up and attached to the back of the skids, Towing bars then can be attached to the front of the skids. If fitting the M-35 Gun System then one of the pylons is left of the left stub wing as the gun fits directly to the inboard station here. The two large ammunition panniers fit to each side of the fuselage. A cross feed links the two sides at the front, and at the rear the feed to gun itself goes on. Decals The decal sheet is in house from ICM, the decals look thin, in register and have minimal carrier film. 3 Options are included; 68-17074 "The Gladiator", C Troop, 16th Cav, Can Tho, January 1972. 68-115031 "Pandora's Box", 238th AWC, Vietnam 1971. 68-15012" #1 Du Me Mi", F Troop, 4th Cav, Phu Bai, 1972. The first 2 carrying the M-35 Gun System. Now normally with ICM the decal and painting guides are quite clear, for some reason they are not for this kits, they are very dark and indistinct, a little bit of a let down. Conclusion This is another great looking kit from ICM which great tooling and possibilities for future variants on the sprues. Very Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
-
AH-1G Cobra (Early Production) US Attack Helicopter ICM 1:32 (32060) Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for pans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The Kit This is a brand new kit from ICM, and their first helicopter kit. The quality of the moulding is first rate from ICM with fine engraved panel lines and nice rivet detail on the tail boom and tail. While this boxing is the the early G you can see from the sprues that other versions will be along as there is the opposite handed tail, different landing skids, an upturned exhaust, different winglets and TOW missiles on the weapons sprures. The kit arrives on 5 main sprues of grey plastic and a clear sprue. As well as the main helicopter and armaments, the kit also comes with the ground handling attachments for the skids, something often missing from kits. While there is good detail on the kit and the option to open up the engine and gearbox area, this area is not massively detailed and will open itself up for the super detailer if they want. Work starts conventionally in the cockpit. The two five part armoured seats are built up and added into the main cockpit tub. Tail controls are added to the floor ,and for the pilots station a cyclic and collective columns go it. For the front seater the weapons control column is made up ad fitted in. Side controllers are also fitted for the gunner. Instrument panels and coamings go in for both stations with instruments being provided as decals. Now the cockpit is complete the visible parts of the engine/gear box and its compartment are built up. This is followed up by parts for the rotor controls. The tails are added onto the fuselage. Here there is quite a large part which overlaps to compete a good solid join. The tail rotor needs attaching to fuselage half before closing up if you want it to move. The engine / gear box parts are fitted into the right fuselage followed by the cockpit and cockpit rear bulkhead parts. The fuselage can now be closed up with additional cockpit armour panels being fitted at each side. At the rear of the engine housing the exhaust part goes in. At the front of the helo the nose goes on, being careful to choose the right parts for the decal option being modelled. Turning things over the large central fuselage insert goes on with additional parts at the nose. The chin turret is now fitted with either one or two miniguns depending on your decal option. A light goes behind the turret. The final exhaust ring goes on the back and the tip of the tail is added. Next up we concentrate on the stub wings. The two wings are built up and the weapons pylons are fitted. These are fitted to the fuselage along with the rear stabilisers towards the tail. The landing skids can then be fitted. Next up the large clear canopy parts go on. A sight is fitted to the front of the central glazing section. The front and rear large side canopy parts are fitted, these can be open or closed as need by the modeller. The access panels can be fitted to each side of the open engine/gear box area; again these can be open or closed as required. We now move to the main rotor. Each of the two blades are split upper/lower, and they are joined together. The central rotor head is made from tow parts, these are upper and lower, these sandwich in the rotor blades. Once these are on the control arms to the swashplate are then added along with the central mounting shaft. The rotor this then mounted. To finish off armaments can be added to the pylons as needed. The kit provides Two M157 7 shot rocket pods, two M158 7 shot rocket pods, two M200 19 shot rocket pods; and two M18 minigun pods. If the modeller want to use them then two pairs of ground handling wheels can be made up and attached to the back of the skids, Towing bars then can be attached to the front of the skids. Decals The decal sheet is in house from ICM, the declas look thin, in register and have minimal carrier film. 4 Options are included; 5728/47 "Blue Max", 2nd Battalion, 20th Aerial Rocket Artillery Regiment. 66-15252 / 15 - Presumed to be part of the Cobra NETT (New Equipment Transition Team) 66-15310, B Battery, 2nd Battalion, 20th Aerial Rocket Artillery Regiment., 1st Cavalry Division (Air mobile) originally from Cobra NETT and featured a two tone trial camouflage scheme. 67-15762 / "Executioner", 235th Air Cavalry, Capt Lou Bouault (Aircraft commander), Daub Ting, November 1969. Conclusion This is another great looking kit from ICM which great tooling and possibilities for future variants on the sprues. Very Highly recommended. Available in the UK from importers H G Hannants Ltd. Review sample courtesy of
-
Hello all, I have started the AH-1Z/W 1/35 project, using Academy kits. Since several parts are common, I'm prioritizing these parts over the rest so that they fit both versions of my models and I'll post the results here. The part that makes the greatest contribution to enhancing the model is the M-197 A/A49E-7(V4) gun turret system. The only difference between the Zulu Cobra and the Whiskey Cobra is that in the latter, the IZLID laser system is installed. In order to mount it, the front panel with the hole where the three barrels pass through is excluded. The two side covers of the cannon are removable thanks to 1 x 1 mm magnets. The metal cannon barrels are the only parts I purchased. These are from Master and I'm waiting for the ones from Def Model.
-
- 3
-
- helicopers
- Cobra
-
(and 1 more)
Tagged with:
-
Two different 1/72nd families of Cobra kits in view by AZ Models and another one by Special Hobby. The Czech ennemy brothers! A 1/72nd Bell AH-1G Cobra kit (early & late versions) is to be released in July by AZ Model. Soon also AH-1Q and TH-1G. Source: https://modelweb.eu/2013/12/23/172-ah-1g-huey-cobra-az-model/ - ref. AZ7450 Another family of 1/72nd Cobras (G and Q/S) is also to be released this summer by Special Hobby. Source: http://www.britmodeller.com/forums/index.php?/topic/234939769-new-72nd-scale-ah-1-cobra-available-soon/)1/72 3D renders V.P.
- 20 replies
-
- AZ Model
- Special Hobby
-
(and 1 more)
Tagged with:
-
AH-1G Cobra "Early Tails over Nam" 1:72 Special Hobby (72427) Most modellers will instantly recognise the Bell AH-1 Cobra Attack Helicopter. The AH-1 was the first production Gunship or Attack Helicopter to see service. During the Vietnam war the US Army began to see the need for armed helicopter to escort its unarmed UH-1 Hueys into combat. In parallel to this Bell Helicopters had been investigating helicopter gunships as early as the late 1950s. In 1962 Bell displayed a mock up concept to the US Army. This Helicopter featured a 20mm gun pod, and a ball turret mounted grenade launcher. It was felt by the Army to be lightweight, under powered and not suitable. Following this the US Army launched and Advanced Aerial Fire Support System (AAFSS) competition. This competition gave rise to the Lockheed AH-56 Cheyenne heavy attack helicopter. However this proved to be to advanced for its time and was eventually cancelled in 1972 after 10 years of development (some things don't change!). Despite the AAFSS programme Bell stuck with its idea of a smaller, lighter gunship and invested its own money developing the AH-1. They used all of the proven components they could from the UH-1 platform, adding these to a newly designed fuselage. When The US Army therefore asked for pans for an interim gunship for Vietnam Bell was in a fortunate position to be able to offer the AH-1, or the Bell 209 as it was then called. Given the work Bell had already done the programme was completed in a relatively speed eight months and won the evaluation against the competition. In 1966 the US Army signed an initial contract for 110 aircraft. Some slight modifications were made to the production airframes. The heavy armoured glass canopy was replaced by Plexiglas with an improvement in performance. Wider rotor blades were fitted and the original retracting skids were replaced by simple fixed units. The G model was the initial 1966 production model gunship for the US Army, with one 1,400shp (1,000 kW) Avco Lycoming T53-13 turboshaft. Bell built over 1100 AH-1Gs between 1967 and 1973, and the Cobras would go on to fly over a million operational hours in Vietnam, approximately 300 were lost to combat and accidents during the war. The U.S. Marine Corps would use AH-1G Cobra in Vietnam for a short period before acquiring twin-engined AH-1J Cobras. The AH-1 went on to serve the US Army until it was replaced by the AH-64 Apache. The last one leaving active service in 1999. The Kit The kit is for the early machines in Vietnam, It arrives as two major sprues, and 3 smaller sprues if light grey plastic, with a single clear sprue. All of the parts are very well moulded with no flaws I can see or flash. There are parts for other Cobra models on the sprues so care needs to be taken to select the right parts. Construction does not start with the cockpit (shock I know!) but with adding some small parts and the exhaust nozzle to the left fuselage half. We then move reassuringly back to the cockpit! The rear bulkhead needs to be removed and replaced with the right one for this boxing. The multipart seats with their armour plating shields are made up and added to the cockpit tub, along with instrument panels and control columns. The instrument are represented by decals. Once the cockpit tub is made up it can be placed inside the fuselage halves and they can be closed up. If you wish the main rotor to rotate then the head is placed into the fuselage at this point. If the modeller does not wish for it to rotate then this step can be left until later on in the build. Following completion of the main fuselage the stub wings/weapons pylons are made up and added to the fuselage. The nose turret is also completed and added at this point as are what look to be armour panels at the side of the cockpits. Construction then moves to the tail section. A left and right handed tail are supplied on the sprues so make sure you select the correct one (right hand for this kit). The tail is constructed and the tail rotor added, along with the tailplanes. Intakes and exhaust details are also added at this stage. Next its time to arm up your Cobra if you so wish (it would be naked without armament tho !). The armament in the kit is two M18 7.62mm Minigun pods, two M261 2.75" Rocket Pods, two M158 2.75" rocket pods, and the 20mm M-35 Gun System. The modeller will need to consult their references to get the exact combination s for the Cobra they are modelling as I suspect not all of these were used at the same time. Once your cobra is "tooled up" the canopies can be added. These are multi-part and can be displayed open as needed. The landing skids are also added at this time. There are different skids for different decal option in this kit so please select the right ones. A nice touch in the box is the addition of ground handling wheels for the skids, and a vehicle tow bar. Great if you wish to add a little something to the model, or included it in a diorama. Canopy Rather than a one part canopy the canopy is a single part main centre piece with two parts for each side. This will allow the modeller to pose the canopies open if they wish. It will though make for a more difficult construction. The parts are quite thin, and very clear. Decals Decals are by Eduard and are provided for four Cobras; A. 68-15183 C Battery, 2nd Battalion, 20th Regiment Aerial Rocket Artillery, Phuoc Vinh, Vietnam 1971. B. 68-15049 C Battery, 2nd Battalion, 20th Regiment Aerial Rocket Artillery, Bu Dop, Vietnam 1970 (Cambodian Invasion Markings) C. 66-15259 Cobra New equipment Training Team, Vung Tau, Vietnam 1967 (USAF Style SA Camo) D1. 68-15189 "Wretched Mildred" D Troop, 3rd Bridge, 4th Cav, Chu Chi, Vietnam 1971 D.2 68-15189 "Wretched Mildred" 1972, after suffering damage the airframe was rebuilt with a new tailboom, this one with the tail rotor on the right side. . Conclusion These new Cobras from Special Hobby are excellent kits of an important Helicopter type. Highly recommended. Review sample courtesy of