Search the Community
Showing results for tags '3D Parts'.
-
hello here is my next build the Lancia Stratos Pirelli : scratch build parts: cheers!
- 12 replies
-
- 22
-
- 1/24 Hasegawa
- Lancia
-
(and 1 more)
Tagged with:
-
I always start with the hardest part on really challenging models. That saves a lot of time, because if that doesn't work, all the time and effort beforehand is wasted. With the Italeri Lancia it's the cockpit. which looks awful! After the cockpit was finally finished in 3D, I bought the model. My special thanks to Iceman 29 @Iceman 29 who gave the cockpit the right look with Fusion 360. I cut off the cockpit roof! It looks good without the "bubble" The headlights and the air slits above the fender have also to be reshaped. The new cockpit looks fantastic, I hope that I can do it nearly as well in real terms in 1/24 scale! I hope that this project will end successfully! Regards Andreas
- 18 replies
-
- 14
-
- Lancia LC2
- Italeri
-
(and 1 more)
Tagged with:
-
Giddey to all, I tried to scratch build the coal winches, but as they are very tiny peaces (3 mm height) and 20 x, I did not succeed. So I decided to 3D print them. I worked many hours with TINKERCAD and learned to use it. Then I uploaded the 3D file at SHAPEWAYS and ordered the model. Starting the next lesson: the printability! Loose shells, thin walls and the scale. The design of the coal winch is relatively simple there are only 8 shells, so I got it after 6 tries. Here are the picĀ“s of this design: and the real thing: here is the next step for the build, 3D printed boat davits and the 2 boat cranes: take look at the red arrow ! This is the previous scratch build part and should be exchanged with 3D Part boat crane The boat davits - challenge was/is they should be movable! Design relatively simple: and the real challenge - the 2 boat cranes! I have to make 2 different designs to get it placed at my model. As designed with tinkercad: As designed with tinkercad: A very komplex design, 4 movable parts, 2 different designs and more than 60 shells! When shapeways noted issues, I had to disconnect up to 20 shells, -change the design, realign and connect the shells again. When uploaded I often discovered missing shells, and start all over again. Here what I ordered at shapeways: I am waiting now for the printed parts, I am very curious! regards Andreas
-
This kit comes with lots of problems.I wish, I could start a again,however we must say, that a lot with your models and l found this superb link, only after I had finished Kent. There are plenty of photo,s of the County class on the net,here are a couple. http://countyclassdestroyers.co.uk/index.htm plenty of pictures http://www.modellmarine.de/index.php?option=com_alphacontent§ion=11&category=210&Itemid=59 Great build of an Airfix kit. http://www.hazegray.org/navhist/rn/destroyers/county/ more pictures Items to overcome with the kit. 1 Plastic soft and brittle. 2 Gap between B turret and Bridge to big. 3 The difference in the class between Batch 1 and 2,even the rear mast was position different within the batches.
-
Its been April since I put anything on Britmodeller,I have been building, just very slowly.However with Peter Halls new P.E. for HMS Tiger Revell (yes it is the old Matchbox kit)I have been busy with Tiger,with 3D parts by Bogey at Shapeways and new gun parts it was time to start this kit. Parts Revell 1/700 HMS Tiger P.E. Atlantic Models HMS Tiger for both Gun and Helicopter version. 3D parts by Bogey at Shapeways Gun Barrels by Master Display case by Trumpeter Name plate by laserlayers Junks by Rainbow
- 22 replies
-
- 3
-
- Revell
- Atlantic models
-
(and 1 more)
Tagged with: