Phil @ Flory Models

Here you go Gary. http://www.modelsforsale.com/catalog/produ...ducts_id=227259 in stock now

lovely photos guys a very sad day

They are the lights for the tail, just a drop of silver on the underside of the clear part does the trick

OK, I have had a reply from Bob Sanchez and he's diggin' into this to see "what's what".

Thanks Jake, Am I right in thinking it was the largest operational jet to operate of a aircraft carrier?

This is a prototype for the Sukhoi Company. they requested the green colour. Sorry it's a crap scan, never have figured out how to scan. But here's one in green.

It was my lame bear back mount him Sorry Broke back mountain joke

Well Stephen you beat me to it Lovely build and looks sharp. As for the nose, who's to say it's not a new or refurbished nose One thing I have learnt is no to aircraft are the same in real life so why should models. As for the exhaust Stephen get some pastel on your finger and rub up it's bottom Well done mate

Hi, the paint is a mix of Tamiya and Vallejo acrylics. I made a large amount last year of the dark green and I lightened it to give the three shades of green.

Full build here http://www.britmodeler.com/forums/index.php?showtopic=965 Thanks Phil

I have just got back from the hospital, great now your cooking. One thing every now and then bleed the tank as it will fill up with water very quick. good luck

is there a exploded diagram with the compressor instructions. If so have a look at that part and see if it's a bolt or a weld. It seems that they have changed the design since my two.

This is one of mine. I'm just making shore your not trying to undo the blue bit?

hold on I'm uploading a photo

it is a brass bolt?

They all come without the regulator installed, you just get two boxes, You are going anti clockwise?

the one on the end? It might have a drop of lock tight on it but it should just unscrew then put the double ended one in and the water trap / air regulator on that give it some welly man.

I should just unscrew whats the problem?

I was having a look at all things Buccaneer and found a great site on all things blackburn buccaneer. http://www.blackburn-buccaneer.co.uk/0_Contents.html You probably all know it but its new to me

No they haven't stretched. I did one side first and then measured the others still on the sheet It's the colour middle layer it's to small. Also the colour sheet it solid Carrier film you have to cut it out I can't think of the technical name but it looks like it's been done on a home printer

I must admit I was very disappoint in the colour and quality of the decals.

I have just emailed Mr Two Bob but I can see me having spay the tail. I'm going to need more Tamiya tape

No she was a out of the box commission. I didn't think the spine looked that bad.

Just so i'm not going mad This shows the tiger and top F-16 all nicely lined up. But look at the bottom F-16 no were near In this shot the bottom f-16 is in but the width of the wing tips is out and the tiger and the top F-16 Tell me it's not just me?

That what I thought but the white and the black tiger strips fit perfect