Phil @ Flory Models

Hi Guys, How did you get on with the wash ? Any problems let me know and we'll fix it for you

Trumpeter 1/32 Swordfish Scale: 1/32 scale Manufacturer: Trumpeter Parts used: out of the box build Main Paints used: Tamiya and Gunze Total running time 240 minutes in 8 parts Part 8 of the video build is free to watch now on the promodeller site covering the weathering and final reveal Happy modelling

Hope these might help you. Got another 500 on the promodeller site

Yep It's mine and will be taking it to the nats !! As for the chipping, it's my scrunched up ball way! just roll up a ball of foil roll it in some silver paint and then roll it on for instant chipping! I show it on the video.

To show the weathering the door is unweathered To solve the problem with the exhausts being to far apart a set off FOD covers deals with that!! So yes a bit off money but it makes a very impressive Display !!

OK guys quick rundown of the kit It goes together great apart from the spine, as it's a flat area it's a nightmare. Better to bite the bullet and fill the lot and fill sand and fill again and so on and then re scribe and rivet the whole thing!!

Yes!! Here's the latest one of the bench and now available as a full video build on the Promodellers site Loads more photos, as well as the 4 hour video of the whole build on the promodellers.com site I have also put the full weathering video on the free to view areas of the site here Airbrush weathering

Steve, the decals are printed back to front. There shown on the under side. They look black but trust me when you lift them off the sheet their there

Thanks for all your kind comments Working on the Bac lightning next

Hi Guys, Well the best thing is to have a watch of the videos and then give it a go Just remember to make sure your paint work is totaly dry!! Have a look here http://www.promodeller.com/promodellers-weathering-wash/ And keep and eye on the weekly news shows on the site as there will be a walk through on weathering next week. Last week was on pre shading http://www.promodeller.com/promodellers-news/ The shows are 30mins long, this weeks airbrushing walk through on pre shading is about 15 mins in and about 15mins long.

Sorry it's a 1/32 Trumpeter kit The engine is all hidden so I decided to cut the tail off to show the engine.

That's where check........Mark.....Check .......Cut is a must instead of.......Check.........Cut.........S**T. So yes it was a Mistake. Here it is being repaired

OK here's my big old Crusader Talk about problems with the build but they were my own fault. first I cut the fuselage in the wrong place Next I dropped it and destroyed the engine and formers but it was all good in the end Yes this is on the Promodellers site now for subscriber to watch over six 30min parts.

Yep, all the time it's bleeding it's ok.... it's when it stops it time to worry

HI guy's, Just done this one for 27 SQN It's the D kit and lots of scratch building. There's 150 ref photos on the subribers area of the site.