-
Posts
129 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Media Demo
Everything posted by markleecarter
-
Eduard 1/48th Sopwith F1 Camel.
markleecarter replied to Paul Thompson's topic in Ready for Inspection - Aircraft
Ah yes, could be - I forgot that the 2F1 had smaller wings. The boxing and instructions were definitely not a ship's camel though and the cabine struts were certainly too long for the positioning of the upper wing holes. Maybe just a mix-up of which sprues were put in the box. Their new Camel should arrive on Friday so I'm hoping that will be an easier build! -
Eduard 1/48th Sopwith F1 Camel.
markleecarter replied to Paul Thompson's topic in Ready for Inspection - Aircraft
I had real problems with the Eduard Camel and just couldn't get the upper wing to sit right. I made such a mess of it that I re-bought the kit and discovered that the original kit had wings of a completely different size, throwing off the strut connection points for the cabine struts. I wonder if this could be the root of some of the problems some people have had. -
Sopwith Camel Stripdown 1/72
markleecarter replied to markleecarter's topic in Royal Air Force Centenary Groupbuild
Just thin superglue applied with the point of a broken micro drill bit. I don't think my soldering skills would be good enough for something this small! -
Sopwith Camel Stripdown 1/72
markleecarter replied to markleecarter's topic in Royal Air Force Centenary Groupbuild
Thanks all! It is certainly the trickiest thing I've ever attempted but still enjoying it so far. I don't know if it was a foolish decision or not, but I decided to go the whole hog and have begun adding the internal bracing wires to the wing. I could only get a bit done before my eyes stopped working! -
Sopwith Camel Stripdown 1/72
markleecarter replied to markleecarter's topic in Royal Air Force Centenary Groupbuild
I have so far done the tailplane and upper wing: And here is the upper wing mid-construction. It is made up of a separate centre section and the two wings which are all held together by thin strips. It's all very fragile! Then with little bracing pieces and a bit of paint this is where I am up to as of last night. It's pretty fiddly but I'm pretty pleased with how quickly it's come together. -
Hope it's ok to join! I'm making a sopwith camel from Eduard's 'Stripdown' range where most plastic parts have been replaced with photoetched parts representing the structure of the aeroplane. The box shows how it is supposed to look when finished: 20180330_085410 by markleecarter, on Flickr
-
Superb work! Very inspiring. Looking forward to the next update.
- 145 replies
-
- sailing ships
- Napoleonic naval warfare
-
(and 1 more)
Tagged with:
-
HMS Victory Revell 1:225
markleecarter replied to markleecarter's topic in Work in Progress - Maritime
Anyone who has made this kit before will know that while it is in many ways a lovely kit, for some silly reason someone decided it would be a good idea to mould loads of coils of rope on the deck. Sanding them off would require re-scribing the deck lines and I'm not sure this would really work. So I decided instead to make the deck from some grooved plastic card I already had. Technically the planks are too wide but they match the original revel ones fairly closely so I think it will be ok: The skid beams are simply cut from the original deck.- 12 replies
-
- 4
-
HMS Victory Revell 1:225
markleecarter replied to markleecarter's topic in Work in Progress - Maritime
Oh and here his is with the new lettering on the stern. It's just a fraction smaller and more spaced out than the previous one which matches the real thing a little bit better I think.- 12 replies
-
- 5
-
HMS Victory Revell 1:225
markleecarter replied to markleecarter's topic in Work in Progress - Maritime
Lego guy has indeed eaten all his spinach which has given him the energy to make a start on the yellow and black! Vallejo yellow ochre very lightly washed with vallejo buff and Revell tar black for the black bits.- 12 replies
-
- 3
-
Some years ago I started a build of this but after a dramatic tumble from the shelf I abandoned the whole thing. Now however, with a brand new purchase of the kit (plus a good few spares from the old build) I am all ready to start again. First of all I decided to go for the decoration of the stern. I had to get myself a size 20/0 brush and an optivisor but I am quite pleased with the results so far. 20171022_223634 by markleecarter, on Flickr I am going to redo the lettering however but I think this shows just how good the detailing is on this little model. I did have to sand off the giant bosses where the lanterns attach and you can still make them out a bit but in real life, and once the lanterns are attached it shouldn't show up too much.
- 12 replies
-
- 10
-
1/18 Spitfire Mk. XIVe - Race #80
markleecarter replied to airscale's topic in Work in Progress - Aircraft
WOW! -
1/18 Spitfire Mk. XIVe - Race #80
markleecarter replied to airscale's topic in Work in Progress - Aircraft
It really is all amazing and those pedals are just gorgeous. At the risk of appearing over critical, while I think the lap belts are really really really good, I do agree that the harness is not as strong as the other elements and I think it may be the shoulder straps - in particular the adjustment buckles just don't look as convincing. Every other element in the build is just so utterly believable but I'm just not sure those buckles are quite the right scale or something. I really hope you don't mind me commenting about it but it's only because you mentioned that you weren't entirely satisfied yourself! -
1/18 Spitfire Mk. XIVe - Race #80
markleecarter replied to airscale's topic in Work in Progress - Aircraft
It's just wonderful. -
RAF RE8, Airfix, 1:72 - FINISHED!
markleecarter replied to Brandy's topic in Work in Progress - Aircraft
Beautiful!- 174 replies
-
And here it is in situ.
-
Little tiny update after not much movement.I have made the control stick and rudder pedals using a combination of wire, micro drill bits, a cut down sewing needle and a spare cog from an old photoetch fret.
-
RAF RE8, Airfix, 1:72 - FINISHED!
markleecarter replied to Brandy's topic in Work in Progress - Aircraft
It was the wings that ultimately stalled my RE8 build. One thing I was getting quite far with however was something I read somewhere about embossing the underside of thin plastic sheet with a ball point pen and gluing that to the wing. I couldn't get it glued down quite to my satisfaction but the look of the ribs is really quite effective. Here is an excellent example of the effect from a quick google image search: http://www.network54.com/Forum/644810/thread/1437573073/last-1437701390/(View+All+Messages+in+this+Thread) Hope you come up with something that pleases you - I'm looking forward to seeing this one finished!- 174 replies
-
RAF RE8, Airfix, 1:72 - FINISHED!
markleecarter replied to Brandy's topic in Work in Progress - Aircraft
Looking very nice!- 174 replies
-
The trouble with thinning the fuselage sides is that the instrument panels don't fit any more! So after looking at too many wwi cockpits I decided to go for one with an 'Elliot Bros' panel which seems to be an additional board on top of the panel itself. It's very small but I quite enjoyed making it.
-
A very (very) tiny update:
-
Thank you for the comments guys, much appreciated. A few pictures of my reworking of the fuselage bracing. I glued the invisible thread to the struts before gluing the struts to the fuselage. It was quite fiddly but I think it looks more realistic now.
-
Sopwith Camel Eduard 1:48th
markleecarter replied to Jean Pierre CULIS-FERY's topic in Work in Progress - Aircraft
Beautiful work! Looking forward to following. -
1/18 Spitfire Mk. XIVe - Race #80
markleecarter replied to airscale's topic in Work in Progress - Aircraft
Just beautiful!