-
Posts
1,450 -
Joined
-
Last visited
-
Days Won
3
Content Type
Events
Profiles
Forums
Media Demo
Posts posted by tc2324
-
-
9 hours ago, Dazey said:
Fantastic models and display. It's also a great way to visualise the differences (and similarities) between the Sabre and the MiG-15.
May I ask what kits you used?Regards,
David
Hi David,
The 86 is the Academy offering and the MiG is the weekend edition from Eduard.
-
Thank you all for the comments. Much appreciated. 👍
-
-
On 8/14/2018 at 2:19 PM, Dave Fleming said:
They do now. Change of policy in the last couple of years.
45 was often quoted as the likely 'next most senior' Squadron at the time the third Lightning Squadron was proposed in the late 70s. By the time the F4J was coming into service, that identity had been absorbed by the TWCU.....
The 39 Sqn number plate was initially set aside for the F-4J but luckily enough a person with a lot of scrambled egg on their hat intervened and ordered 74 to be reactivated.
A bomber unit flying fighters just wasn`t cricket in his book.
- 2
-
Forgot to mention the finished article was posted on the Ready of Inspection thread last week.
- 1
-
On 8/6/2018 at 6:34 PM, Troffa said:
Yes, I think 74 Sqn jumped the queue in 1984,
Not so much jumped the queue, just a case of who you know, not what you know. Back then a certain amount of lobbying from officers could go a long way, especially if they were ex-Tigers. No such luck in todays environment.
As noted elsewhere, it would be great if 74 returned on Typhoons and the RAF got it`s Tiger squadron back, (no offence to 230 Sqn by the way), but you could say I`m slightly biased on the matter......
- 1
- 2
-
Again, thanks for for the comments, much appreciated.
-
Thanks for the comments all. 👍
Absolutely appreciate this isn`t going float everyone's boat, it was purely the challenge of pushing myself and if your familiar with my builds, you know I`m not one to do the `norm`.
-
A little something, (if you can call the Airfix 1/24 scale kit `little`), I have been working on and off for the last few months based on one of the residents now based at the Manston fire dump.
I wanted to do something a little different from the usual Harrier builds you see and after my visit to Manston last September, this wreck caught me eye.
To put it into context what I was trying to replicate here are a couple of pictures of the real thing....,
..... and now for my effort....,
Thanks for looking.
- 62
- 2
- 2
-
-
Spent an hour experimenting with ideas on how to get the rain water staining done on this and the idea I went with was mixing some Tamiya Rust from one of their weathering kits and watering it down. I then put a drop on the panel I wanted to look a little weather beaten and let gravity do it`s thing.
Once dry, this was the result.
What do you think?
- 3
-
-
-
-
A series of shots showing the progress so far.
The last two shots show the choice of the spray paints used as the base colours. These will all be weathered down in due course to better represent faded and sun bleached paint work.
If anyone has ideas for fading out the roundel decals, then I`d be happy to hear your ideas/suggestions.
More soon.
- 4
-
-
-
Great choice doing the `J` in 74 stripes. 👍
Depending on which airframe you do, note that ZE350 did not have the RWR on the sides of the intakes like all the others and research which aircraft kept their original US shade of grey. The link below may be of some help.
- 4
-
17 hours ago, goggsy said:
Great start. I wondered what the hell you were doing with the tail plane there until I took a second look at the original photos..... I’ll look forward to seeing this come together. Are you going to bother filling the rivets?
Not going to bother filling all the rivets goggsy, far too many and I could imagine that that kind of job would be soul destroying. 😉 I can live with then and hopefully the dio itself will take your eye away from the issues.
Majority of the base completed today starting off with cutting the board to size and adding strip`s of double sided sticky tape........,
....... which in turn led to the fur being placed on the board then the the operation moving to the garden for spraying. Thank god I`m using `grass green` paint, SWMBO didn`t notice a thing.....!Once dry the base ended up looking like this......,
....... and with the `kit` in place, these following pictures may give you a better idea of what I`m trying to achieve.
More soon.- 7
-
Coming back to the Harrier dio, this morning I took delivery of some grass green spray paint, a A2 cut of teddy bear fur and some wood board in preparation of making the base. Never used teddy bear fur before, but I hear it can give you a great result if you want to simulate long or uncut grass so it will be an interesting experiment.
Just need the weather to cooperate before moving forward with it.........
- 5
-
Spent the last couple of days looking after the missus while she recovers from her 4 hours and 40 minutes London Marathon triumph, so in between ice packs and cup of teas/coffee`s, I`ve managed to do the odd bit here and there.
Photo update in no particular order.....,
I`ve started work on the seat using plasticard to make the seat a reasonable representation of the real thin as well as drilling holes on a few places to represent missing panels. The engine blades are dirty and weathered and the wing section with dropping flaps are mostly done. You will notice that I`ve pretty much painted everything black and that`s simply because when your looking inside these wrecks, everything comes across as black and the black will add to the darkness of the inside of hulk in the finished article.
More soon.
- 2
-
Had the day off today so managed to crack on with a few things and experiment with some ideas regarding this build. First though I apologise for the high number of photo`s in this update but felt it necessary to highlight what I`m trying to do and it may also help or inspire someone else who may be in the middle of chopping up a 1/24 Harrier......
So as mentioned in the previous post, drill, drill bit, file and plasticard were put to good use to create the little intake doors around the main intake. (really should find out what they are called....)
It`s all a bit rough and ready at the moment, but I`ll tidy up the edges in due course and this is just to give you an idea of how I`m getting it done.Next are a series of pictures showing how I`m getting the tail to bend at a right angle. Luckily this kit comes with a tail unit for the AV-8 variant show I have used this as a test subject.
First mark up the cut line and cut the half that`s the direction of the bend, starboard in this case. Then score a line on the port half but don`t cut all the way through.
Next trim about 4mm off each of the starboard cut line half`s................. and then stick everything together so you end up with something like this.......
You now have a tail fin that can bend to the required angle and after a bit of filler and a bit of paint, it`s a reasonable representation of what I`m after.
Like I said this is all very experimental and done of a budget, so I`m open to suggestions before starting on the real parts.more soon.
- 3
-
Thanks chaps.
Peter, I was informed, (not confirmed though), that airframes are not burnt anymore at Manston, something to be with environment issues in the area. They have one of these huge metal aircraft looking containers for the fire practice. I believe they use smoke bombs on the actual airframes to simulate fire. Most airframes, including the huge Nimrod, are just sitting there in the elements doing not a lot.
Spent last night looking over the main issues that need to be planned and action.
1. Cutting off the nose, check.
(Not a perfect fit admittedly but the great thing about wreck diorama builds is that you can get away with certain things. In this case the nose is hanging off so I don`t need it to fit perfectly).
2. Internal engine plastic all needs to be taken out. As seen in the photos the nozzles are missing and it`s just 4 big black holes.
3. Got to think about the tail bend to a near right angle. I have an idea so hopefully will be able to post the result tomorrow.
4. Intake intakes(?) need to be opened up. Requires a drill, drill bit, file and plasticard.
Hopefully over the next couple of days I`ll be able to post the results.More soon.
- 3
-
Needing a break from the Norwich project, I have chosen to start one of my 1/24 projects. This will be a first for me and a long term project, something to work on between Norwich builds but hopefully ready for display at the 2019 Newark Cockpit Fest. I obtained this kit quite cheaply, £25 IIRC with the original plan to build this alongside a 1/24 Hurricane and Typhoon and then display all of them in flight on a central plinth. It was at this point that the drugs wore off and reality set in as to where the hell I would store such a display A centerpiece for the dinning room table would no doubt mean future dinners being eaten on our laps and SWMBO giving me `that` look for possibly years to come. So I have held off getting the Hurricane and plan to build the Harrier and Tiffie as separate entities. I`ll discuss plans for the Tiffie when the time comes as this thread concerns the Harrier GR.3.
So first a couple of pictures and this gives you an idea of the scale, 1/24 v 1/72 in the first photo and then the 1/24 Tiffie v 1/24 Harrier.
It was quite surprising to see that the Harrier and Tiffie are quite similar in size and makes you realise how large the Typhoon was and how small the Harrier GR.3 is despite the 20 years that separate both designs.So what exactly am I going to do with this Harrier. As mentioned I originally had the idea of an in-flight, bog standard build, possibly dropping a bomb or recreating a Falklands War ejection scene in 1/24 adding the aftermarket detailing sets and really going to town on as much detail as possible. It was when I googled said aftermarket sets that I realised that I would be paying out possibly 5 times the amount I spent on the kit itself! While I love modeling as a hobby, I refuse to take out a second mortgage on it. So plan B sprung into action and while it was a plan B, it`s more a Plan A- as it`s a modelling challenge right up my alley and far more cost effective....., kinda. (Dio base and bits will have a cost implication).
So last September I was lucky enough to get a visit to the Manston Fire School to view the various airframes, especially ZE360. But I was also quite intrigued with the other residents and always thought this Harrier, (XW768), would make for a decent diorama. It was one of three Harrier GR.3`s delivered to Halton as the last flying examples in the RAF and used for airframe training before ending it`s days as an non destructive airframe for the fire school. I`m assuming non destructive means they can not burn it??
More soon.- 8
BoB 1968
in Ready for Inspection - Aircraft
Posted
As you may already know it`s been 50 years since the making of the BoB movie. Leonard Mosley`s `making of` book was probably one of the first books I read as a child and the front cover always drew my attention. It seemed fitting that if I ever came to make a BoB movie diorama, I would choose the front cover.
Just need to find a correctly sized frame to protect the base and this will be done but as it`s a day past the actual anniversary of the real BoB, it seemed right to post this up now.
The kits are 1/72 and the only really issue I had during the build has the continual humming of the movies theme tune......
Thanks for looking.