maxdecal
Members-
Posts
86 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Media Demo
Everything posted by maxdecal
-
Light aircraft of the Antarctic/Arctic
maxdecal replied to Ozmac's topic in Ready for Inspection - Aircraft
What an interesting topic! I've been interested in antarctic aviation for years and I've produced a few decal sheets with Antarctica as a theme including sheets for Beavers, Otter and LC-130 Hercules and some helicopters used in Antarctica. Most are sold out at the moment but see the Antarctic helicopter sheet at http://www.maxdecals.com/webpages/max7222.html As regards early light aircraft used in the exploration of Antarctica many are available in kit form but in some cases I'm not sure of the exact markings carried. My quick list shown below. 1928: Hubert Wilkins used a Lockheed Vega. 1929: Richard Byrd used a Ford Trimotor and a Fairchild (exact type not known to me). The Trimotor was kitted by Monogram in 1/77 scale and comes with scale sledges and huskies. The Norwegians used a Lockheed Vega and a Hansa-Brandenburg W.33 serial F-18 on their expedition that year. 1931: Douglas Mawson lead the BANZARE expedition which utilised a DH Moth on floats. Serial was VH-ULD in big letters on the upper wings. Fuselage was orange or red. Avis make a kit of this type. 1933-1935: Richard Byrd's second expedition to Antarctica used a Curtiss Condor on floats ( Glencoe models??), Also used, Kellet K-4 autogyro, a Barkley-grow seaplane and another Fokker. 1935: Lincoln Ellsworth's trans-antarctic expedition used a Northrop Gamma (available in kit form from Williams Bros). In the 1930's the BGLE (British Graham-land Expedition) used a DH Fox Moth on floats, the registration was G -ACRU with a penguin figure on the rudder. The Australians used a DH Gypsy Moth on floats in the search for Lincoln Ellsworth (he was found alive and well). Germany used two Dornier Wal flying boats to survey large tracts of the Antarctic coastline in 1939 ( Huma Model or A model make kits). 1946 saw the large scale deployment of American forces to Antarctica in Operation High Jump. Douglas R4D's , martin Mariners and helicopters were used. Other posters have mentioned DH Beavers and Otters used in Antarctica. The Australian ANARE used a DC-3, Kingfisher, Walrus and beavers and Otters for a number of years. In the 1950's the Russians deployed IL-12, Il-14 and later IL-18 aircraft. They also used the Li-2 and the An-2. There was a joint Swedish-Norwegian expedition in the late fifties where the Norwegians used a DHC Otter and the Swedes deployed a Beech 18 on skis and a Saab Safir on floats. Belgium also mounted an expedition in the late fifties or the early sixties in which they used an Alouette II helicopter and possibly a Cessna 180. Lots more besides that shown above. All very colourful and make nice modelling projects. Cheers Joe -
Vampire T.55 ejection seat Question- telescopic rails?
maxdecal replied to maxdecal's topic in Aircraft Cold War
Hi Nige, Thanks for that info. It will be the left seat that will be shown as "ejected" when I get this model built. Regards, Joe -
Vampire T.55 ejection seat Question- telescopic rails?
maxdecal replied to maxdecal's topic in Aircraft Cold War
Thanks Selwyn. That is very helpful. Must have been quite a bang and flash for the guy sitting next to the ejectee. Best regards, Joe -
Vampire T.55 ejection seat Question- telescopic rails?
maxdecal replied to maxdecal's topic in Aircraft Cold War
Hi Steve, That's very helpful, thank you. One more question if I may. On the Vampire T.55 or any other side by side trainer do the instructors sit on the left or the right? Best regards, Joe -
Vampire T.55 ejection seat Question- telescopic rails?
maxdecal replied to maxdecal's topic in Aircraft Cold War
Thanks Julien, I found a good source of info on the Marti-baker seats at http://www.martin-baker.com/_pdfs/history_development_mk1-mk10_ejection_seats.pdf On page 17 there is a photo showing a test firing of a Mk 3 from a Gloster Meteor and there is at telescopic arm sticking out of the fuselage> I'm trying to verify if the same thing would have been visible on the Vampire T.55. Best regards, Joe -
Hi all, I want to model a Vampire T.55 after one of the seats has been fired. The T.55's were equipped with Martin -Baker Mk 2 or mk 3 seats I think, so my question is what rail arrangement was used on the Vampire? Was it a twin metal rail or a solid post or was it a telescopic rail that extended once the seat was fired? I'm attempting to model the moment when an Irish Air Corps cadet ejected from a spinning Vampire. The change in airflow following the ejection allowed the instructor to recover from the spin and fly the aircraft back to Baldonnel. See http://www.independent.ie/regionals/kerryman/news/military-achievement-award-for-jeremiah-30382988.html and http://www.ejection-history.org.uk/Country-By-Country/Ireland.htm. Any help greatly appreciated. Regards, Joe
-
It's a good kit but the Nitto 1/100 scale kit is pretty good too. Very hard to find and an odd scale but is very well moulded and detailed. Comes in an AWACS boxing but can be built as a 707. cheers, Joe
-
Problem with a sparmax regulator on a Revell compressor
maxdecal replied to maxdecal's topic in Compressors
Thanks, that did the trick! cheers, Joe -
Hi folks. I purchased a Revell compressor complete with regulator about 9 months ago and it worked great up until the last time i used it about 3 months ago. Just attempted to use it today for the the first time in ages and the compressor switches on and fills the tank to 50 psi but there is no air at all reaching the airbrush. I thought I may have had the regulator locked but opening it fully and closing it fully has no effect. it seems to be blocking all air flow. Any ideas what may be wrong or how I can fix the regulator? Any help greatly appreciated. Cheers, Joe
-
1/72 Fokker D.VII are the Revell and Esci kits the same mould?
maxdecal replied to maxdecal's topic in Aircraft WWI
Thanks for all the replies. I think I'll upscale to Eduard. regards, Joe -
Hi folks, IAC Fouga Magisters did in fact use the small tip tanks most of the time. The large ones were only used for ferry flights to France when the aircraft required 600 hour inspections. Cheers, Joe
-
Canberra B(I)8 ever taxi with canopy open?
maxdecal replied to maxdecal's topic in Aircraft Cold War
Thanks for the info. Really helpful and quite amazing that the canopy couldn't be opened on the B(I)8. Must have got really hot in there! the diorama I'm planning features an Indian Af Canberra taxiing past a wrecked Katanga Fouga Magister in the Congo in Sept 1961. Cheers, Joe -
Hi folks, I'm planning a diorama featuring a Canberra B(I)8 being marshalled on to a parking spot on the ramp. Did pilots ever taxi the B(I)8 with the canopy open? Also, what is the resting position of the Canberra elevators assuming hydraulic pressure has bled down after a few hours? Thanks, Joe
-
Thanks for the replies. So rudder straight but nosewheel castored left or right should be ok. Thanks, Joe
-
Hi All, I'm planning to do a small diorama of a Canberra taxiing off the runway onto the hard stand. I want to build it with the nosewheels turned off-centre but I was Just wondering if when the nose wheels were turned off-centre was the rudder deflected as well on the real thing? Any help greatly apreciated. thanks. Joe http://www.maxdecals.com
-
position of target tug winch on post war Mosquito TT.35
maxdecal posted a topic in Aircraft Cold War
Hi All, I'm trying to find out where on the aircraft the target tug winch was attached on post war Mosquito TT.35's. I've seen a few indistinct pictures which look as if the winch was mounted on the belly centreline below the bulged bombay doors. Would that make sense? Is there a structural member running along the centreline that would allow the winch to be mounted like that and still allow the bomb bay doors to open? Any help greatly appreciated. Joe -
New Turbo Porter decal sheet from Max Decals
maxdecal replied to maxdecal's topic in The Rumourmonger
Hi All, The new 1/48 scale TurboPorter decal sheet is now available to order from my website via Paypal.. Price is 12 euro each including worldwide postage.Please see my webshop at http://www.maxdecals.com/Maxdecalsshop.html Cheers, Joe -
Hi all, I have a new decal sheet in production for the Turboporter. It should be available in 3 weeks.Price will be 12 euro including world wide postage. Subjects include Swiss, Austrian, Iranian Japanese and Dubai examples. Suitable for Roden kit 449 (the one that comes with the optional larger fin fillet and extended wing tips). The decal sheet features subjects with both the standard wingtip/fin fillet and the larger one so an earlier boxing of the Turboporter can be used as well. I'll post it on the shop when it's available. See http://www.maxdecals.com and http://www.maxdecals.com/Maxdecalsshop.html Cheers, Joe
-
Hi all, i saw a stand at Telford that had some Red Roo conversion kits on display but i can't remember who it was. Does anyone know of a source for Red roo conversions in the UK? Regards, Joe
-
I'm delighted to see this kit released. An Irish Dauphin can be made almost straight from the box, though the rear doors were flush fitting rather than the slightly bulged type shown in the about to be released Kittyhawk dauphin. Irish Air Corps Dauphin markings are available on max4820. For details see http://www.maxdecals.com/webpages/max4820.html Joe
- 62 replies
-
- Kitty Hawk
- Dolphin
-
(and 1 more)
Tagged with:
-
Max decals is pleased to announce that the new Fouga Magister decal sheet in 1/72 scale is now available to purchase direct from our store at http://www.maxdecals.com/Maxdecalsshop.html The sheet features Fouga Magisters from no less than 11 former operators of the type including Algeria, Bangladesh, Cameroon, El Salvador, Finland (6 options no less!), Ireland (Silver Swallows aerobatic display team), Katanga, Lebanon, Morocco, Senegal and Togo. It's a treat for fans of small air forces and the decals are suitable for all the Fouga Magister kits in 1/72 scale including those announced recently by MPM and Valom together with the existing Heller and airfix kits. The Fouga Magister sheet costs 14 euro including worldwide postage. Selected subjects from this sheet will be scaled up to 1/48 scale for the new kits from Kinetic and Avant Garde. To celebrate the launch of this new decal sheet we are temporarily reducing the price on what must be the definitive book on the Fouga. Fouga Magister- An Irish perspective is the perfect reference for those that wish to add plenty of detail to their Fouga models. The book can be purchased from Max decals at 15 euro each plus postage.
- 2 replies
-
- Fouga magister
- small air forces
-
(and 3 more)
Tagged with:
-
New Fouga Magister decal sheet in 1/72. Available at Telford which will work with any 1/72 scale Fouga kit See http://www.maxdecals.com for details. I had a problem trying to load the images on here. Regards, Joe
- 103 replies
-
- CM.170R
- Special Hobby
-
(and 1 more)
Tagged with: