Jump to content

Night Owl

Frozen
  • Content Count

    126
  • Joined

  • Last visited

Everything posted by Night Owl

  1. Night Owl

    Deleted

    Deleted - not the wanted area
  2. Awsome choice I have it on my to do list as well there are some great after market flap, cockpit and airbrake kits. I was able to negotiate a deal with another modeller on this site for the afterburner decal set " Jammin Jihad" I like the three tone gray or desert scheme. I am starting a TA-4J Adversaries Bandits in a five color scheme that will challange my masking skills. Ill be following your profile happy modeling if your looking for anything I have a stash of some F-117 upgrades and an Academy F-117 1:48 kit. I can photograph for you. I also have an unbuilt Kitty Hawk F-35A and an Italer
  3. Glad to see your finished that's a keeper for the shelf. Great job and detailing you've inspired me to look at a Raptor so what are you onto next?
  4. I'll be following your progress so please post as time permits. Nice detailing behind the seat was that the kit or your doing?
  5. After a day of not looking at the model I referenced some photos and decided to tone down the panel lines l think it looks better. For a scale reference here is the fire Scout beside a Sea Hawk
  6. When you get to the camouflage scheme may I suggest you use a mask or masking putty. I think those colors are will loose their individuality with too soft of an edge. I had this problem on an A-1 Skyraider at 1:48 and found masking improved the final finish tremendously. I mean really and I have argued this point if you reduce any sprayed on scheme from 1:1 to 1:48 the scale would be representative of an almost unfeathered edge. Many good models have been ruined by out of scale airbrushing.
  7. Wow thats ambitious detailing making moving parts, soldering tubing is an aquired skill it will be very interesting to see how the parts function alot of dry fitting and testing for sure. I guess you could continue on trying to get all the flaps ect to move that would be impressive. Looking to the RC planes for how they rig control surfaces might give you an insight into making yours work at smaller scale.
  8. Got alot done this weekend on the fire scout. Filling and sanding adding all the little pieces. This kit is like glass super fragile I can't list all the parts that broke while painting and sanding. The aft section looking at photos was missing alot of rivet details so I broke out the rivet decals. So because this is a small model after I did the Vallejo light ghost gray primer I noticed that the model without pre shading was extremely boring. So I preshaded NATO black and mist coated Dark Ghosts gray then cut in on the larger surface with light
  9. Nice attention to details all around can you post some more photos of the cockpit and underside. Great paint and weathering quit flawless.
  10. Tonight stared getting into this kit looking at detailed photos there are many corrections that will need to be made along the way. This kind of moulding mistake is almost unforgivable I mean common for the price this is not acceptable. So ill have to cut it and fill it and shape it. Cut off the bottom and ill sand it down we will see if that works. Sanded, reglued and puttied. Lined up ill let it dry overnight and sand it out tomorrow.
  11. Thanks for the tips ill try them and see if I can get the images to enlarge.
  12. Thanks for all the kind words it makes the hours of work worth while.
  13. I use Smugmug its a small fee but east to use www.smugmug.com
  14. After allot of posts I had another member comment that it was too bad my photos were not larger. I tried in the post to enlarge the photo but I dont think thats the issue as i didnt see any options. I would appreciate some help with this techy issue. Photo details says 3246 x 2488 avg 2.13 MB
  15. I didnt use decals they tend to look too much like decals and this pattern didnt exist in a decal or mask so it was lots of tape.
  16. Really nice airbrushing looks really fine colours are very striking nice choice adding the FOD covers.
  17. Night Owl Models "Up all Night" proudly displays this Great Wall Hobby hand painted digital camouflage Mig-29AS in the Slovakian Air force scheme. Construction details posted in Under Construction forum.
  18. Thats looking good be careful on your weathering dont go overboard stick with what the photos are showing you. If you have a spare wing from another model paint it the same way and use it to trial your weathering and decals. Both can make or break a good build. If your paint is too flat and your decals are silvering try a coat of Vallejo satin clear over your weathering then apply decals. Every decal set acts differently so do trials it will save you from the " want to fly this thing into the wall" moment.
  19. Finally finished and ready to post to final inspection in a few days. Just making some pallets for the engine cowling and assemmbling intake covers, engine covers, ladder and bench. I also did an upgrade to the maintenance cart from photos. Laying everything out for the first time thinking about a proper diorama base. In conclusion the Great Wall Hobby kit was a pleasure no surprises this kit would look good painted in any scheme. Adding the Eduard detail sets went very smooth and well worth the cost. Surface detail on th
  20. After all the tape was off I am very happy with the finish. looking at the photos there is light weathing of course. and Ill have to make a mask for the tail numbers. I have a few more parts to finish the camo on and some cutting in to paint the nose, stabalizer tips other small parts.
  21. Tonight final coat of paint and the big reveal, so far I am happy with the results. After two weeks of masking it will take a few hours to unmask. There are bound to be a few touch ups.
  22. I tripped across this kit looking for carrier deck parts and thought it would be a unique build. Did some reading up on the drone and found out an interest combat proven history in recent conflicts. https://en.m.wikipedia.org/wiki/Northrop_Grumman_MQ-8_Fire_Scout This Brengun kit in 1/48th on first look has nice surface detail it will take some careful cutting to get the parts off the carrier sprune. Plans are very straight forward should be a good build I havent done a kit lik
  23. That looks good just the right amount of detail its hard to say when to stop. You can go poor buying photo etch sets and upgrade kits I did an F-35B I think you'll be interested in had a great time frustrating thing is a mask set came out the next year. Keep up the hard work you gain skills for the next challenge.
  24. Your build is right up my alley we build the same way. I like your attention to the kits short falls and going to the extra lengths to scratch build parts and add on PE. I think Js works does a F-22 camo mask you should check out. Look forward to seeing the finished Jet.
×
×
  • Create New...