-
Posts
541 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Media Demo
Everything posted by Bill.B
-
I can’t even get an airbrush finish as good as that, very well done! 😎
-
1/48 Grumman F-14D Tomcat ‘Red Rippers’
Bill.B replied to Dansk's topic in Ready for Inspection - Aircraft
That’s a cracking model and very nicely weathered too. -
I realise this type of project is nothing new, but it’s something I’ve fancied doing for a while and has been a refreshing change and a welcome break from the usual kit bashing. The kit was an impulse purchase from Aldi whilst doing the weekly shopping and at less than a fiver for a starter kit I thought it rude to pass up on such a bargain. Anyway, after a minor amount of flash was trimmed off the sprue the airframe was airbrushed using the little paint pots supplied which were diluted with Tamiya X-20A thinners. Everything was then lacquered with Humbrol Gloss prior to applying the decals after which it was given a coat of Humbrol Matt to seal everything in. The deep picture frame was purchased from ‘The Range’ and the back sides of the sprues drilled to accept a few small screws inserted from behind the picture frame back plate to hold everything in place. I must say I found the build(?) very satisfying and am already thinking of making an Me.109E-3 to accompany the Spit.
- 15 replies
-
- 36
-
Very well detailed and finished at that scale. 😎 I’m currently building a Grob Astir at the same scale so I know just how much effort you’ve put into such a diminutive model. 😉
- 10 replies
-
1/144 Authentic Airliners PanAm 747sp
Bill.B replied to Turbofan's topic in Ready for Inspection - Aircraft
Stunning! -
A very nice build, but as far as I can see from your photos the inboard lower flaps and upper wing spoilers are in the correct position and don’t impinge on the ailerons.
-
Superb job of an oldie!
-
Zlin XII - G-AFMW (RSmodels 1/72)
Bill.B replied to Andrew.S's topic in Ready for Inspection - Aircraft
You’ve done a terrific job of that especially given how tiny the model is. -
The Mallock Spitfire 22: SR46, ex PK350
Bill.B replied to Tony Whittingham's topic in Ready for Inspection - Aircraft
Very nicely done! -
Nice job, and you’ve just inspired me to build a Harrier myself...and possibly a Buccaneer too.
-
Superb job!
-
Another Airfix kit has found its way onto my building board, but this time in the guise of their re-tooled 1/48 Mk.22/24 Spitfire. The kit builds very nicely without any major issues, but the canopy could have done with being bought up to date as it’s far too thick and on my example it was crazed all over. Not wanting to spend money on extras it was simply built out of the box with the addition of just a couple of scratch built parts, ie. the aerial under the starboard wing, seat belts and rudder trim tab actuator. Exhausts , pitot probe and cannons were drilled out and the three lights under the fuselage were painted with Tamiya clear colours and backed with aluminium foil to make them more prominent. The scheme I chose was that of 607 Sqdn.’s entry into the Cooper Air race of 1948 and because of this the weathering was kept very light as the aircraft would most likely have been specially cleaned for the event. Paints are Tamiya acrylics with Humbrol lacquers and a small amount of pastels and oils added for the weathering. Constructive criticism always welcome chaps.
- 18 replies
-
- 51
-
Stunning!
-
Dedicated Unhesitating Service To Our Fighting forces.
Bill.B replied to stevej60's topic in Ready for Inspection - Aircraft
Very nicely done, and I especially like the prototypical rotor droop. Super model! -
RAF Jaguar GR1 - Kitty Hawk 1/48
Bill.B replied to DAG058's topic in Ready for Inspection - Aircraft
Nicely done! -
Top job!
-
Thanks for the kind words and heads up on the crow bar Joachim, I shall amend the colour tomorrow!
-
Thanks Chris, much appreciated and I very much approve of your Avatar! 😎
-
Thanks everyone for the kind words. 🙂
-
Having built an amount of axis tanks and aircraft over the past years I thought it time to try my hand at an allied aeroplane for fear of favouritism . This is the 1/48 Eduard Profi kit of a Mk.VIII Spitfire and my first attempt at one of their kits and I have to say they are top quality with crisp detailing and almost perfect fit of parts along with many decal options, not to mention the photo etch parts. Suffice to say this won’t be the last Eduard kit I’ll be building! Anyway, this is built out of the box using Ultimate Primer, Tamiya paints, Humbrol lacquers, oil paint wash and weathering powder. Low resolution photos are courtesy of an ancient iPhone so apologies for that and I really must invest in a proper camera. As ever, any constructive criticism very welcome.
- 15 replies
-
- 22
-
1/32 Tamiyia F4 Phantom VF-33 TARSIERS
Bill.B replied to chameleon2009's topic in Ready for Inspection - Aircraft
Stunning! -
1/32 P-47D Razorback.....to bomb or not to bomb
Bill.B replied to David Mooney's topic in Ready for Inspection - Aircraft
Top job, very well done. -
Westland Lysander Mk.IIIA(SD) 1/72 Dora Wings
Bill.B replied to Redboost's topic in Ready for Inspection - Aircraft
Very nicely made and it looks bigger than 1/72! -
That’s an excellent build!
-
F/A-18D Hornet, VMFA-121 Green Knights, Kuwait 2007
Bill.B replied to Alan P's topic in Ready for Inspection - Aircraft
Very nicely made model and I especially like the weathering.