Jump to content

Ozzyman69

Members
 View Profile  See their activity

  • Posts

    514

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Ozzyman69

  1. Ozzyman69
    Thanks for Your recomendation. It`s very important for me and for my project. But I looking for any additional material for the IL-4 in Finnish AF service. (The Roden Opel Blitz it`s easy to find here in any UKR models shop ). Cheers. Andrii
  2. Ozzyman69
    Do You remember who is author of IL-4 WIP the idea?
  3. Ozzyman69
    Thanks for that. I agree. An idea with foil applying has a good sense. This method gives the realistic visual effect of skin, corrugated surface and good base for chips.
  4. Ozzyman69
    So far so good! Slowly and carefully I make chip through paint to metal skin. I use a sharp cutter and magnifying glass (and emotions restrain of course). to be continue...
  5. Ozzyman69
    Hello, friends. I slowly step by step continue to publish the results of my WIP.. Painting is in progress. Very important! Before applying a yellow stripes mark (propeller blades tip and fuselage and etc), You must cover the painting a neutral color zone first. I use a silver for that. ..end engines exhaust ducts... are done. Cheers. Andrii.
  6. Ozzyman69
    Thank You for your comment, Tony. The diorama will be built in future I hope, and I could find the figures in 1/72 scale perhaps. A suitable display may be as a both engines maintenance by finnish airfield staff I think. But first of all I have to do a final work with aircraft painting and etc. May be I can start to diorama work in next year (or over the next few months). Sincerely grateful for Your help. Thank You. Cheers. Andrii.
  7. Ozzyman69
    What do You think about (for example) an engines cowlings location? I propose to make it and put separately, in front of the aircraft (on the ground).
  8. Ozzyman69
    The next step of this project is the painting of the upper side of aircraft. It will turn out of well I hope.
  9. Ozzyman69
    The red markings ("no step area on flaps") must be applied I think in according with the aircraft painting standart. Sometimes these designations are lost from operation of the aircraft, and this is normal. But in any case, such as a red "no step" marks are appropriate for this model I think.
  10. Ozzyman69
    Hello. A very interesting and effective solution about foil on the skin. I like it. Sometimes a great effect gives small local riveting seams as opinion. In any case, it`s a great work! Best regards Andrii
  11. Ozzyman69
    Actually in this kit I found many inaccuracies by the manufacturer with the drawings. I tried to correct it as far as possible. In any case, this kit is satis because it is the basic for the modeller`s creativity.
  12. Ozzyman69
    Thanks, I will check it again, but I dont know that I have left (remained) from original kit by ADP Master models already. Many parts were reworked during the process.
  13. Ozzyman69
    A very interesting project. I wish success You in the WIP. In my opinion, everything should be well, as allways. Best Regards. Andrii
  14. Ozzyman69
    Thank You, Tony. I will keep up all the plans and steps so punctually as possible. I really appreciate you interest to my work. Thanks.
  15. Ozzyman69
    Thank you! I have a plan about foiled skin in future, after completion of painting. It`s necessary to perform a local crack of paint over the liners and panels (like a result of external influences activity).
  16. Ozzyman69
    Hi friends and colleagues! Today, I continue to publish for the post a new photos of my WIP here. An amount of work has done a great but it is very interesting for me. The result for today: - painting preparation; - priming; - preshading; - landing gears assy; - engine painting; - and etc.. I hope You like it. Cheers/ Andrii.
  17. Ozzyman69
    Thank you, Konstantin! I will try to do it.
  18. Ozzyman69
    So far so good The hodiernal result and accomplished parts are: - engine inlet cowlings support rods; - propellers blades and shafts; - flaps; - and etc.
  19. Ozzyman69
    ...finally for today - engine inlet cowlings; - prop blades & spinner; - end etc.. Hope You like it. Cheers Andrii
  20. Ozzyman69
    Well. It`s time for the engine bay. The result for today. There is an engine mounting frame, cooling gills and exhaust manifold here:
  21. Ozzyman69
    Thanks for the comment, Benedikt. My productivity level and work speed are not satis. I have not enough free time for the hobby. An additional workload occurs in the process of a build, it`s true. I`m waiting for the last stage of the final work. Fiddly I know, but I have no choice. It`s a very intresting project in the history of aircraft.
  22. Ozzyman69
    Hi, friends! I have to continue my W.I.P. and I can to show You the result of my work for today. The external componens that have done completely and installed on place correctly. List of the external parts in according with scheme of component location: - landing light assy (light bay, light&lens); - pitot probe tube (I reworked basic part of kit); - Venturi probe tube (changed material, the original part from box is discarded); - antenna`s mast; - rudder mass balance. I am happy! Engine M-88. The structure of engine is based on a main parts from box but upgraded and reworked during the process. Cheers Andrii
  23. Ozzyman69
    Hi, friends! Well, it`s another sunny day and one more step of WIP here. The aluminium skin is completely done, mask and riveting also. I am heppy Hope You like the result. Best regards Andrii.
  24. Ozzyman69
    I continue... to make a long story (during the last week) short the empennage, lower part of the wing are covered by aluminium foil...
  25. Ozzyman69
    Cc: "What is this that stands before me? Figure in black which points at me Turn around quick, and start to run Find out I'm the chosen one..." Hi friends! It`s me again My WIP of the best famous kit by ADP Master modells IL-4 here in pictures. So far so good. I continue to make the external parts: aluminium skin, windshield, outer ribs, nose cone etc. Cheers. Andrii
×
×
  • Create New...