MAG

Looking good! Glad to see you're back at the bench - can't wait to see more

On with a little update.Once some plastic was freed from sprues and cleaned up with Flory sanders the time has come for PE. I use Olfa AK-4 knife with a rounded blade and gently rock it over the PE till it clicks (which means it's cut).I rest PE on and hold it with a Small Shop Cut Off set. PE is then glued with CA glue or thin Gator Glue:Slowly taking shape:Some reference material arrived in the meantime:More parts were cleaned up and glued together with Mr Cement S:Since I will need to install the tail wheel before joining fuselage halves - I've turned my attention to Eduard's resin wheels. They are truly gorgeous They were washed first using a dishwashing liquid and warm water. Scrubbed with a hard toothbrush, rinsed under clean water and left to dry on a paper towel:All of the parts were locked one by one in a Proxxon FMS 75 precision vice and cut off with a Tamiya Fine Craft Saw:Wheel spokes were cleaned up by sanding them on a medium coarse sanding stick in a circular motion to make sure that they sand evenly:Wheels were cleaned up with Alec scraper and tyre treads were restored using a Tamiya saw again:Group photo - I use a separate (dry) hard toothbrush to brush off dust when sanding:Wheel spokes were positioned with tweezers and glued with a minute amount of thin CA glue. Having used toothpicks for ages I used Flex-I-File CA applicator for the first time and I can't understand why I haven't pick one up sooner - absolutely amazing tool!Finally I cleaned up the gunsight with the aim of replacing thick and completely out of scale glass with a piece of thin transparent styrene sheet. While looking for reference photos online I found out that Quickboost (Aires) makes a stunning resin replica of that gunsight (REVI C/12D) and decided to order one (there are actually 6 in a set in 1/48 scale) Aires alternative (photo from Quickboost's website):With all of the parts needed to close the fuselage ready I can't wait to get some paint on them Please let me know which seat belts would you rather see used as I'm still not sure. Also do you like photos with black fuzz around (wheel close up) or are clean ones better? C&C welcome!Thanks,Marek

Like most of us I'm finding it difficult to stay on track with my modelling projects. Between work and family life the time is at premium and so I've signed up here a while ago to post some of my work and hopefully keep focus on a single project at a time lost cause I know but I shall give it a try nonetheless. First up is a 1/48 Eduard Weekend Edition Bf109E-1 (84164). It's not a new kit and it has it's issues from what I've been reading but it should build up fairly easily. I really just need it to get me back into the swing of things as I've had very little time on the bench in the last few months. I've picked a few extra bits that should make it easier on the eye without overcomplicating the whole process: Eduard PE dedicated to this model (49651) Eduard Masks (EX439) Brassin Wheels (648058) A choice of either SUPERFABRIC or the new'ish on the market STEEL Seatbelts (49081 or 49098) - any suggestions will be welcome Painting will be in the box art scheme using MRP paints. I want to experiment a little and use sliver primer as a base for scratches and weathering... we shall see All of it together: Obligatory sprue shots: Canopy parts are very nice and clear: Minimalistic decals typical of weekend boxings: Instructions - I've already marked the parts that I won't be using as I'm doing it closed up: Superfabric vs Steelbelts - I got the first a while ago thinking that short of fiddling with buckles on standard fabric ones, they will look the best. Now that I've had a look and a little play on a side with the steel ones I'm quite keen to give them a try. They are super thin, the paint seems to hold on to them and even though they aren't fabric, they look nicer to the eye with the shadows printed, etc. I'll try and snap a better comparison photo between the too if anyone's interested. Any and all input, experiences, etc. will be most welcome! A couple shots of the extra weekend PE - only after starting the build I managed to get a better light and shoot a macro photo so figured I will post it up here as well as it gives a better rendition of how the colours look. Last but not least - brassin wheels And here is the "First Cut" shot I've seen it done somewhere ages ago and quite like the idea - even though it's difficult to remember about it in the excitement of a new build. I've started on the build a little already and will post up more photos soon. Thanks, Marek

Coming along nicely Followed and looking forward to more photos

Hello everyone, Tank152 - thank you very much for your kind words - we're really glad that you're happy with our service. Beer Monster - our payments are processed by PayPal (including card payments) so your security is unaffected. However our website does have an SSL certificate as well, as an extra layer of security for you when you login, checkout, etc. Thank you and Tank152 for bringing that to our attention though as it wasn't displaying but we've already spoken with our hosting company and that has now been sorted out and is fully working. Kind regards, Marek @ HMHobbies PS. As always feel free to email or pm us with any suggestions or problems - we'll do our best to resolve them asap.