Jump to content

Mr. Hudson

Members
  • Posts

    34
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Mr. Hudson

  1. Hello everybody, I want to show you my Me 262 C-1a. The Me 262 is one of the most beautiful aircraft designs for me. Construction: The Academy kit, released in 2007, contains a multitude of details and very interesting options, including alternative components for the Me 262 C-1a with a Walther rocket in the rear fuselage. Unfortunately, in my opinion, the nose shape failed completely, so an extensive cosmetic surgery has to be done. I also narrowed the fuselage at the top by approx. 1 mm, which means that the too wide canopy has to be exchanged for a deep-drawn one. An old canopy from a Hasegawa Me 262 served as a deep-drawing stamp. The rear fuselage is also suboptimal. Academy simply suppressed the opening for the Walther rocket and did not bulge the fuselage in this area enough. So this will be changed too. And because it is already work, I add a few details around the plane, for example extended flaps and slats. Original aircraft: My model shows the C-1a V186, as far as I know the only raketen schwalbe (rocket swallow) that has flown. In horizontal flight 934 km/h were achieved with additional thrust, making the V186 the fastest Me 262 ever flown (comparison A-1a: 870 km/h). With Heinz Bär in the cockpit, the aircraft shot down a P-47 that was flying over 8,000 m over Lechfeld airfield after about 3 minutes after start from runway. Source: asisbiz.com Painting: The paintjob was started as standard for me on an Alclad Airframe aluminum primer. After that preshading, three glazing layers per colour, painting scratches with a silver pin, intermediate finish with future, decals, washing, dust, oil paints, chalks etc. Walk around: Bottom view: Details: I hope you like my model. Criticism, notes, and comments are gladly welcome. Kai
  2. Hi all, here is my new 1/72 MPM Douglas A-20G Havoc "la france libre": Construction: MPM has created a superb kit in 1/72 for the Douglas Havoc / Boston variants. In 2008 i brought the D-Day Havocs kit variants with the solid gun nose. At first, I wanted to build OOB, but after a while, some details were added scratch: Cockpit: Life raft and details Nose: Brass MG barrels (accessory), fuselage reinforcement, MG ejectors Fuselage: Rudimentary fuselage installation, rear exit Turret: Entire tower structure, brass MG barrels (accessory) Engines: Cables, valve lifters, exhaust pipes, slightly opened cooling flaps Charger: Inlet details, open outlet Gear: Brake lines, resin wheels (accessory) With some creative breaks, I worked on the model for almost 6 months. Original aircraft: My model, the "la france libre" was the first Havoc in Europe with 100 successful mission missions and was called "Miss laid" for a long time. The plane was sent to Paris in the autumn of 1944 for the French liberation celebration as a part of an exhibition and renamed for this reason. Most of the Havocs were heavily weathered. Source: worldwarphotos.info Finish: I wanted to transfer the impression of the original photo above to my model. The paintjob was started as standard for me on an Alclad Airframe aluminum primer. After that preshading, three glazing layers per colour, painting scratches with a silver pin, masking and painting of the walk-ways, masking, painting and weathering of the invasion stripes, intermediate finish with future, decals, washing, painted exhaust gas traces, dust oil paints, chalks etc. etc. Walkaround: Bottom: Details: I hope you like my model. Criticism, notes, and comments are gladly welcome. Kai
  3. Hi all, here is my new 1/72 Eduard Fw 190 A-8 (late) "black 10": The kit: The eduard kit is probably the best 1/72 Fw 190 on the market. The kit parts and also the brassin aftermarket parts fit together very well. The surface details are fantastic. Original aircraft: The Fw 190 was a very durable construction. Equipped with a BMW 801 D star engine, the aircraft could be used for a variety of operational configurations. The A-8, which was built from mid-1944 onwards, was equipped with four 20 mm MG 151s and two 13 mm MG 131s. My model: My model represents the black 10, I./JG 11 in Darmstadt which was participated in the defense of the Reich (Reichsverteidigung) at the end of the WW II. Construction: The Eduard kit is not easy to build but with a lot of dry fiting you can put all parts together without putty and sanding. I have used some Brassin Detail-Sets (fuselage MG 131 and flaps) which i can highly recommend. Several details (e.g. brake lines, MG 151, position lights, antennae) were scratch built. The kit was painted with Gunze acrylics and Alclad II metalics. I built two Fw 190 at the same time: Weathering: Preshading, postlighting, Tamiya Smoke for traces of oil and gas plume, various oil and pastell colors for dirt and wear, silver pin for scratches. Walk arround: Bottom: Details: I hope you like this model. Criticism, notes, and comments are gladly welcome. Merry christmas! Kai
  4. Hi all, here is my new 1/72 Eduard Fw 190 A-8: The kit: The eduard kit is probably the best 1/72 Fw 190 on the market. The kit parts and also the brassin aftermarket parts fit together very well. The surface details are fantastic. Original aircraft: The Fw 190 is a very durable construction. Equipped with a BMW 801 D star engine, the aircraft could be used for a variety of operational configurations. The A-8, which was built from mid-1944 onwards, was equipped with four 20 mm MG 151s and two 13 mm MG 131s.The aircraft had also an ETC-501 multipropose pylon under the fuselage. In the fighter role, there was an additional fuel tank attached. My model: My model represents the blue 13, Stab/JG 300 which was participated in the defense of the Reich (Reichsverteidigung) towards the end of 1944. Construction: The Eduard kit is not easy to build but with a lot of dry fiting you can put all parts together without putty and sanding. I have used some Brassin Detail-Sets which i can highly recommend: 602082 Fw 190 A-8 Engine 602086 Fw 190 A Propeller Several details (e.g. brake lines, MG 151, position lights, antennae) were scratch built. The kit was painted with Gunze acrylics and Alclad II metalics. Weathering: Preshading, postlighting, Tamiya Smoke for traces of oil and gas plume, various oil and pastell colors for dirt and wear, silver pin for scratches. Walk arround: Some details: I hope you like this model. Criticism, notes, and comments are gladly welcome. Best regards. Kai
  5. Hi there, this ist my new Airfix 1/72 Dornier Do 17 Z-2: Kit and this model: The Do 17 Z has been neglected by manufacturers for many years in 1/72 scale. 2015 Airfix has finally released a modern current kit. Airfix aims at an affordable price and a relatively simple assembly in the kit concept. Nevertheless, the kit contains many detail parts and convinces through an intelligent kit division. F1 + AT - my model - flew in August 1940, in the high phase of the air battle, attacks against England. On August 18, 1940, the aircraft was involved in a low level airraid on the Henley RAF base. Construction: Due to the very consequent design on the computer, the kit is lost in my opinion the personality of a modelor and mold maker. The kit seems to me to be somewhat soulless. For example, the engravings and especially the guns do not convince me completely. But for this, model builders are there, so I tried to breathe life into the model. The kit was completed as follows: - engraving supplementation, especially wings - replace kit flaps as etching parts - new bombbay windows (top) - MG 15 from CMK (did not really convince me too) - engine overhaul - undercarriage overhaul (brake lines and struts) - position lights - various antennas and small parts Finish: The model is painted with Gunze paints in my usual procedure with glazed paint layers. Now see for yourself. Top view: Bottom view: Details: Hope you like this model. Criticism, notes, and comments are gladly welcome. Best regards Kai
  6. @ MPB: RLM 05 - Mixture with Gunze Colours: 5 ml H 318 radom 5 ml H 1 white 1-2 drops H 42 bluegrey 5-6 drops H 329 yellow 5-6 drops H 346 sand Regards Kai
  7. Thank you all very much for your nice words. Its a little bit tricky to join the Cockpit an the fuselage, because there are no fixing points e.g. So my idea was, to connect the cockpit parts on the back site after painting with Tamiya tape and let that unfold like a hinge. Thus, the entire unit can be inserted from the front into the fuselage and this flexibly. Then the entire unit is simply glued to the correct position. Best regards Kai
  8. Hello Fuad, marvelous work! The construction, the paintjob, the weathering, the photographing - everthing is perfect! Wonderful. Regards Kai
  9. Hi there, this is my brandnew 1/72nd scale Dornier Do 217 K-1 + DFS 228 Mistel. Kits: Do 217 K-1: The Do 217 family of Italeri goes back to the mid-70s and is almost 40 years old. Almost no cockpit- and undercarriagedetails, narrow-chested engines, a too narrow rear fuselage and raised and false engravings featuring this model. Positiv to mention are the thick but still perfectly transparent clear parts. 2011 Italeri revised the carriage and cockpit parts with a so called "historic upgrade". DFS 228: Huma is an unfortunately no longer existing German manufacturer of plastic models. The DFS 228 belonged to the late kits of Huma. Besides the good shape reproducing the fine cockpit details are remarkable. This model: It shows a Dornier Do 217 K-1 and a DFS 228 as ready to take off mistletoe. The Dornier carrier is the third prototype of the Dornier K series: "K-3". This aircraft was not used in combat, but rather as a carrier for experimental aircraft. In this role, the Do 217 carrying the DFS 228 and Me 328 - both photographically known - and possibly more experimental aircraft and bodies. The Deutsche Forschungsanstalt für Segelflug - DFS (German Research Institute for Gliding) had received the mandate from RLM to develop a rocket-propelled high altitude reconnaissance aircraft. The DFS 228 should reach a height of about 23,000 meters, having previously placed from the Do 217 carrier aircraft at approximately 8,000 m and clicked out there. The rest did the built in Walter rocket engine (identical to the Me 163 engine). Thereafter, the DFS 228 flew in soaring to a height of about 16,000 meters and was brought back to 23,000 m by the rocket engine. With changing pushing and gliding phases, the DFS 228 should have about 2,000 km range. In the misteltoe configuration with the Dornier Do 217 K-1, some original images of the piggyback aircraft standing and rolling are obtained. The DFS 228 was also flown, but probably only as glider without the rocket engine. Construction: In addition to two BMW 801 from a Hasegawa Ju 88, I use the Italeri historic upgrade Do 217 M-1 kit for this model. Scratch were built: - recessed engravings and cockpit back armor - widened rear fuselage - landing light and pitot tube - position lights - several antennae - opened Cockpitdoor - DFS 228 carring frame and many other small parts. Painting and Weathering: The kit was painted with Gunze Colors. RLM 72/73 (Dornier top) and RLM 05 (DFS 228) were homemade mixtures. Weathering in brief: Preshading, lightened base color, Gunze mud on exposed areas with airbrush, Tamiya Smoke for traces of oil and gas plume, various oil colors for dirt and wear. Dornier Cockpit Parts: Dornier Do 217 K-1 Flugversuchsträger: DFS 228 Höhenaufklärer: Dornier Do 217 K-1 + DFS 228 Mistel: Hope you like this model. Criticism, notes, and comments are gladly welcome. Best regards. Kai
  10. Thanks to everybody for the nice comments. @Noah Greggs: On the wings are auxiliary starter rockets mounted. WIP: Greetings Kai
  11. Hi there, here I want to show another one of my models. It is Special Hobby's "Supermarine Seafire FR 47" in 1/72 scale. I built it in 2014. Kit: The Special Hobby kit is a wonderful short-run kit. A single-engine fighter aircraft in 1/72 with more than 100 parts, that's smashing! Original Aircraft: The Seafire 47 was the last produced version of the long line of Spitfire / Seafire versions of the legendary designer RJ Mitchell. The aircraft itself was put into service after the Second World War 1946-47 and saw except for the UN missions at the beginning of the Korean War no active hostilities. My model: My model representing airplane 178 operating aboard HMS Triumph (800° Squadron), coded VP461, during the korean war. "FR" in the model designation of the Seafire 47 stands for Fighter / Reconnaissance. Because my kit contains except fueltanks no wing loads (Special Hobby offers a separate Seafire-Kit with additional bombs and missiles), I decided to build up my kit as an aircraft in the photo reconnaissance role. Most delivered Seafire 47 were equipped with a photo compartment in the rear fuselage. One camera was looking horizonal slightly downward to the left or right side of the aircraft (the viewing direction has been set before the flight), another one vertically downwards. With built-in cameras, the aircraft wore basically no external loads with the exception of fueltanks. Construction: The Special hobby kit is not easy to build. Scratch were built: - cameras and compartment - landing flaps and wing structure - thermoformed rear canopy and many other small parts. The kit was painted with Gunze acrylics. Weathering: Preshading, postlighting, Tamiya Smoke for traces of oil and gas plume, various oil and pastell colors for dirt and wear. Top view: Bottom view: Details: I hope you like this model. Criticism, notes, and comments are gladly welcome. Best regards. Kai
  12. @ all: Thank you very much for your words. @ popeye: The answer to your question is very simple: The entrance into the cockpit is the former lower rear weapon station (C-Stand). There, the entrance ladder is attached. Cheers Kai
  13. Hi Fuad, thats a very nice model. And the photos are very beautyful too! Thank you for showing. Kai
  14. Horrido, a real beauty. Very nice! Kai
  15. Would you please start the engine and fly a round. Original and model can not be distinguished. Outstanding work! Kai
  16. Wonderful, to see this old kit bulit so exellent!
  17. Hi all, here i want to show my Dornier Do 215 B-5 Nachtjäger: Kit + Construction: The ICM model is very well detailed, but has substantial fitting problems due to a complex part division and some "manufacturing inaccuracies". Nevertheless, a beautiful model can be built. The only in my opinion necessary modification of the model is to increase the cooling air intakes. The FuG 202 antennae were srcatch bulit. Original aircarft: With the introduction of the DB 601 series engines, the Do 17 received the new RLM number 215. The B-5 was the last model of this aircraft series from the early 30s. Originally planned as a fast passenger aircraft, the latest variant of the series had a maximum speed of 480 km / h. Only 17 (20 in an other source) of this night fighter variant were built. First, the Do 215 B-5 were equipped only with an infrared viewer Spanner (red headlight in the front). In late 1941 the first FuG 202 were installed in the machine. Whether the infrared viewer was still used at this time, is unknown to me so my model shows both. My machine is a plane of Nachtjagdgeschwader 2 (night fighter squadron), in the spring of 1942 long distance night fighter raids were carried out form Leeuwarden (Netherlands) up to the whole UK. There bombers were hunted, who were returning from their operations over the Reich. Some Do 215 B-5 should have been in service until May 1944. Walkaround: Bottom: Some Details: Hope you like this model. Criticism, notes, and comments are gladly welcome. Greetings from Germany. Kai
  18. Outstanding and masterful in every aspect. I am realy deeply impressed! Kai
  19. Many thanks for the compliments. This spurs for the next models.
  20. Thank you very much. The yellow undersurfaces are shown on a colour photo in "Osprey Combat Aircrafts 32, B-25 Mitchell Units of the MTO" on page 63. I don't know the reason for this, but it looks very beautyful. "Brake key" is a translation error. I want to say chock .
  21. Hi all, here i want to show my North American B-25 J Mitchell "Bottoms Up II": Original aircraft: "Bottoms Up II" (B-25J-5 43-27900, 486th BS / 340th BG) flown by 1Lt. Clarence Morton, operated in the spring of 1944 in Italy and carried out various attacks against German military. On 12 March 1944, the aircraft should do its 39th mission. When attacking a railway bridge near Ora (northern Italy), the machine was hit by flak ín the right engine, after dropping of her bombs. 1Lt. Morton managed to fly "Bottoms Up II" approximately 600 km to the former base of the 486th BS on the island of Corsica. There he made an emergency landing. In this case, the plane was so badly damaged that it was abandoned. (Source: Osprey Combat Aircrafts 32, B-25 Mitchell Units of the MTO). Here you can see "Bottoms Up II" passing by during her last raid over the Mediterranean sea: Construction: I bulit this model nearly out of the box. Some tiny parts were scratch built: - some cables and hydraulic lines - antennae wires - landing and position lights and pitot tube Tailsitting: The Tailsitting has been fixed by chocks, which were glued to the main wheels. The model had already received a lot of weight in the fuselage during construction. However, since the glass nose section can not be weighed, all the weight was not enough. By the chocks the rotation axis is laid back about 8 mm and now the model stands stable. A simple trick to extend the lever arm. Painting: The kit was as painted with Gunze acrylics and different Alclad II aluminium tones. Walkaround: Some Details: Hope you like this model. Criticism, notes, and comments are gladly welcome. I wish you a happy new year. Kai
  22. An outstanding first post! I like this model very much.
  23. Thank you very much Duncan. The Hasegawa-Kit is new for me. I built my model two years ago and thats the way with all the things ...
  24. Hi all, here I want to show you my 1/72 Mistel 2. Kit: A complete kit of the Mistel 2 1/72 was not available, when i built this model. I use a Revell Fw 190 A-8 as upper and a Hasegawa Ju 88 G-1 as lower component. The Kampfkopf (warhead) comes from an Amtech Ju 88 H-3 Mistel-Kit. Original aircraft: Mistel 2 were manufactured from old Ju 88. Arming, radio measurement systems and the cockpit were removed. Instead of the cockpit a 3.5T hollow charge warhead was placed. Depending on the version (different detonators length) it could penetrate up to 17 meters (!) of reinforced concrete. The aircraft should - controlled by an attached Fw 190 - attack exposed targets (ships, bridges, fortifications). The Ju 88 was aligned and unlatched from the Fw 190 in 1 - 1.5 km away from the target, then the "cruise missle" flew the rest of its way by automatic control with an accuracy of +/- 10 m. The problem was that the targets were well defended and the cumbersome aircraft was hardly accurately align in practice and so there was little success. This model: My model was the guide plane of 6. / KG 200. In early 1945 some Mistel 2 should attack the British naval base Scapa Flow. Fortunetly due to the lack of fuel, it did not come to this use. Construction: The biggest challenge was the connection of the warhead with the fuselage. Everthing else was just to finish the two separate kits. Scratch were built: - some Kampfkopf details - removed Fw 190 guns - carrying structure - some cables and hydraulc lines - landing light and pitot tube and other tiny parts. The kit was as painted with Gunze colors. Weathering in brief: Preshading, lightened base colour, Gunze mud on exposed areas with airbrush, Tamiya Smoke for traces of oil and gas plume, various oil colors for dirt and wear. Walkaround: The Fw 190: Some details: Hope you like this. Best regards. Kai
  25. Hi there, this is my 1/72nd scale Ju 388 L-1a. I built it in 2011. Kitbash: I used a Hasegawa Ju 188 kit as the basis for the extension of Ju 388-specific components of the older Ju 388 kit from Special Hobby. SH-parts: cockpit, fin, rear fuselage, engine-cowlings and all components of the propeller. Every thing else is Hasegawa. Original Aircraft: The Ju 388 should become the Luftwaffes Höhenaufklärer (high altitude reconnaissance aircraft) for the years 1945 - 46. In the variant L-1a, equipped with a 3 man cockpit, a pressure chamber and the power plant BMW 801 TJ, only a few machines were built, usually as Ju 188 conversions. My model: RT + KD is my favorite Ju 388. Although the aircraft has all the equipment of the series L-1, there is a lack of the additional air intakes under the engines, so you can see the very elegant lines of this aircraft as to the best. Construction: Besides the kitbash-conversion I have done the following scratchwork: - FuG 217 Neptun antennas - periscope visor for tailguns - rear amour plate - lifeboat rope activity and many other tiny details. Weathering: The kit was painted with Gunze acrylics. Preshading, Tamiya Smoke for traces of oil and gas plume. Top view: Bottom view: Details top: Details bottom: Hope you like this model. Criticism, notes, and comments are gladly welcome. Best regards. Kai
×
×
  • Create New...