Paul @ Parkes682Decals
Members-
Posts
690 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Media Demo
Everything posted by Paul @ Parkes682Decals
-
Hi All The Super Etendard Arctic Tiger 2007 Decals are ready,due to demand only No 62 is being printed The set covers no 62 aircraft,the varoius other decals are on the Airfix Kit so no need to print them. The cost is £12.80 on my website, but for Britmodellers Special Offer (who 6 have ordered them and asked me back in December 2007) the cost will be £11.80 Including postage and packing. This is a Limited run of 20 sets,I may in future make some more depending on demand Thanks for your patience Paul
-
Thanks Bex Well i do try to get the quality right hope Louise and you enjoy the decals ive just done,it was a pleasure to do them. May be some photos then. Paul
-
Hi Graham Thanks for the comments,wish i could show you the U.S.A Coke Cola Christmas Truck a friend of mine John King who makes trucks and asked me to do the Truck decals in the advert for Coke Cola Christmas a few years ago i did decals for all the truck and the trailers 4 off A4 sheets of decals looked brilliant when put them on his truck. Cheers Paul
-
Paul can you print stuff in grey?
Paul @ Parkes682Decals replied to mungo1974's topic in Parkes682Decals
Hi Gary You will have email your requirements on my email address parkes682@aol.com and i can sort something out for you Cheers Paul -
Paul can you print stuff in grey?
Paul @ Parkes682Decals replied to mungo1974's topic in Parkes682Decals
Hi Gary Yes I can print in grey,they would have to be dark grey only light grey does not show up very well.The only other way is to print on to white decal and cut out the decal very close to the edge.The Sharkmouth would have to be printed on to white or if low viz on to clear decal which one?You would have to post photos for me to see. Best Regards Paul -
Hi All Seeing its difficult to get some photos on to this site,ive put some photo's of a model i made in 1982-83 of Thrust 2 World land speed record holder.Its in 1:12 scale i completeley scratchbuilt it plastic card most of it is vacformed.The decals took me 2-3 weeks to put on after i had made them in Trim film.Have a look i might interest some of you its in Thrust 2 page on my website www.parkes682decals.piczo.com Best Regards Paul
-
Super Etendard 62 get's it's tiger strips
Paul @ Parkes682Decals replied to Paul @ Parkes682Decals's topic in Parkes682Decals
Hi All Just to let you know the decals are coming on nicely,just trying to get some more info on the no 49 aircraft.The 62 is nearly finished just trying to get them on sheets of A4 better. Best Regards Paul -
Hi Bex Just tell them that there was no decals in the kit only the instructions can they help The kit number is 04251 Airbus A321 "Austrian Airlines - Millennium" they are generally very helpful to there customers.Ive used them in the past,give it a try nothing to loose. Paul
-
Hi Louise Yes,I can help contact this company Revell Gmbh &Co.KG Boston House 64-66 Queensway Hemel Hempsted HP2 5HA or email ukbranch@revell.de Tell them that you did not have any in the kit when you bought it,tell them the number of the kit and they should be able to help Paul
-
Hi John I might have a spare set of these decals there's a snag ive got to go through 18 A4 folders to find them. Paul
-
Hi All Im in the process of producing some DC-3 Dakota Decals with many more to follow of different colour schemes of different DC-3's Visit the website,and look on DC-3 Dakota's www.parkes682decals.piczo.com There is also another AN-2 on Decals in Development 15 Best Regards Paul
-
Hi All The Tiger finally get's it's strips,well in test shot form printing of decals follows shortly. These are only test shots and the decals come out razor sharp,getting them to look correct was the probelm as there are not many photo's around. Well have a look on the website www.parkes682decals.piczo.com Also got some DC-3 decals to go on when the ink has dried on the decal film,and a new Antonov An2 has well in Canadian Markings. Best Regards Paul
-
Hi All Ive just added the numbers and the 11 Flottille badge to my page on Arctic Tigers 2007 on my website,the badge had to be drawn from scratch.The Tiger strips will be ready some time in the week.Most of the other markings are included in the Airfix kit.The only probelm is you will need to get a spare fuel tank for the other wing.I here Alistar AtoZ is making them as a resin so thats were you will need to go to get one. More updates to follow. Paul
-
Artic Tiger Decals for Super Etendard
Paul @ Parkes682Decals replied to Paul @ Parkes682Decals's topic in Decals
Hi Phoenix Yes i added you too the list,ive just been doing the strips to tanks and wings and just started doing the fuselage now.Will add them to website in a few days so you can have a look. Best Regards Paul -
Revell 1:72 F16B 'Tigermeet'
Paul @ Parkes682Decals replied to AnonymousDFB1's topic in Ready for Inspection - Aircraft
Hi Mish Yes our eyesight does get worse as we get older,mine included im 50 next month and just started wearing glasses (1.25) for modelling.But on the serious side you will get a far better finish with an airbrush some advice put very thin coats on and dont rush it put a coat of paint on and let it dry.You will get the standard up very quick indeed and use Maskol its really good for masking,and try trim film for round the cockpit canopys.Trim Film is a decal you cut out you can get a razor sharp edge around canopy's.You can even airbrush the clear version to the required colour and put that on.You get it from Hannants Code no MSTF-0 But they do range of colours if you get stuck give me an email Best Regards Paul -
Hi Stu Did you tell them who did the decals,and did they like the base Paul
-
Arctic Tiger 2007 Super Etendards
Paul @ Parkes682Decals replied to Paul @ Parkes682Decals's topic in Parkes682Decals
Hi Gary "Its by modellers for modellers" thats how i look at it,we can all help one another in this hobby we have no boundary's Cheers Paul -
Arctic Tiger 2007 Super Etendards
Paul @ Parkes682Decals replied to Paul @ Parkes682Decals's topic in Parkes682Decals
Hi Yes I want a set for myself,it should turn a few heads at model club at Sutton when i put it on the table at Competition Night in February hopefully I'll soon let you know,i just done test shots of the tiger on the fuselage/tail they look great,so my daughters say working on tiger strips now till christmas. Paul -
Hi I possibly may do some after i do the tiger meet decals,i will see how busy i am can you send some photo or drawings of these to parkes682@aol.com Paul
-
Arctic Tiger 2007 Super Etendards
Paul @ Parkes682Decals replied to Paul @ Parkes682Decals's topic in Parkes682Decals
Hi Mike Yes i will certainly let you know when they are ready at reduced cost to all Britmodeller members Yes the scheme looks awesome very eye catching. Paul -
Hi All I am currently drawing up a set of 1:48th scale Decals of the Super Etendards that were at the recent Arctic Tiger 2007 Meet.These should be ready in New Year,they are a limited short run both in Clear and White Decal.The Cost will be put on Britmodeller and reduced for members. Cheers Paul
-
Hi All i did for him was the bits i said,doing the serial numbers in white you have to print on white decal with a grey border around the serial numbers and get a perfect match Paul
-
Hi Vlammie I did some for a friend recently,he was based at RAF Stanley just after the war done him some falkland badges and maltese crosses came out brill he was very pleased with them Paul
-
Artic Tiger Decals for Super Etendard
Paul @ Parkes682Decals replied to Paul @ Parkes682Decals's topic in Decals
Hi well thats about 6 sets that roughly on order,from Britmodellers had a modeller from Beriut ask me for some of the F-16 Tiger throwing snowballs will have to look into that also Cheers Paul