Paul @ Parkes682Decals
-
Posts
690 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Media Demo
Posts posted by Paul @ Parkes682Decals
-
-
OooH, blimey and wow, what a fantastic scheme.
How on earth did we end up with a pointless faded dove type motive thingy with this above fabalous livery?
Great decals, very much looking forward to your big bird coming together.
Cheers.
Hi
Well my A380 "British Pride" in the paint shop, there's a lot of paint to get on this one mainly white
Paul
-
Hi All
A380 "First Flight" in process of decals should be ready for weekend,and photos to follow
Paul
-
Hi All
Well ive got my two A380's up to rub down primer stage the undercarriage is a probelm they are so thin and flimsy you can knock them of quite easily.
One is "First Flight" markings and one is in my Olympic scheme.
Hopefully i should be able to get them into the paint shop for some white gloss all over.
Masking is going to take some time
The first time ive built A380 any other surprise's await us ?
Paul
-
Hi Paul
I'm after some decals - white printed ones.....
What do you need - format, resolution etc. in order to get some done?
Also I only need a small number (4 I think) so do you do a whole sheet as a minimum (what size?) if so is it better to fill it with other decals I need, spares, future projects etc? or do you do small pieces? what size paper is a normal print?
What sort of lead time is there?
Many Thanks
The Flying Badger
Hi there
Yes i can print white
I have the worlds only A4 "White" Inkjet Printer that prints white on to clear decal film.
I can do you 1 sheet or up to 10 sheets.
I have a minimum order per sheet so you can fill it up with future projects.
Yes,you do get spares.
I always do spares just in case.
They are made in strips (have a look at my photo's it shows you how I make them)
Hope this helps
I have sent you a PM
All i need is good colour photos in jpeg format.
Imagine a box around each piece of artwork (height x width) in mm of each piece of artwork required so i know how big it is.
Paul
Parkes682Decals
-
Hi All
Here's some BAe Hawk Demonstrator decals in 1:48th scale ive done for my private collection
Its ZJ951 most the decals for it ive done but the rest is from an Airfix Sheet which includes the Canadian Hawk which i will need the small white stencils and some other odds and ends
Have a look
-
Thanks Paul
Chris
its pleasure to make them for you,remember to put on enough Micro Sol (red bottle) to help around the tail rudder former stops the air getting behind and silvering the decals.
It helps it mould to the surface and softens it,its mustard stuff.
-
Hi All
Here's some 1:72 Virgin Atlantic Concorde Decals in 1:72.
The modeller only wants the tail and flying ladies logo's
Have a look
These are the "White" inkjet decals for the tail logo with red background
-
Hi
I decided to crame in a 2nd A380 this time in "First Flight" scheme along side of my British Airways one just hope i can get both done in time.
Paul
-
You had better print me a set and pop it with my stuff then!
Hi Rich
"revise list of spares"
Paul
-
Do you have my address or should I collect mine
Hi Rich
PM sent
Paul
-
Hi
I have finally finished of the BA "Firefly" decals,they are in my section Parkes682Decals .
Have a look
Paul
-
Hi All
Here's one for my private collection, its the British Airways Airbus A319 "Firefly" decals for the aircraft that bought the Olympic Flame to Culdrose in Cornwall to start the relay.
The decals will go with the British Airways decals supplied with the Revell Kit of the Airbus A319-100.
They will turn it into "Firefly" all that is needed is a paint job on the front of the Airbus
Well here's the photos
These are all hand drawn,hope you like them its shows you can make up anything using the right decals.
The 2012 logo can be omitted for copyright reasons
The 2012 LOGO is a white inkjet decal with the 2012 Logo on top
Paul
-
very nice!....one day somebody might get real with the point pigsty makes and decals will be made.
Hi
Just putting the finishing touches to my "Firefly" decals in 1:144 scale,they are really small for a Airbus 319-100 hoping to post pictures of the decals soon
Paul
-
Hi All
Here's some Tornado F.3 Decals in 1:48th scale ive done for my collection
They are from Saudi Air Force and Italian Air Force
The Saudi Tornado F.3 is from the 29th Squadron RSAF
The Italian Tornado F.3 is from 36 Stormo Italian Air Force
The magazine is from model plane international showing the artwork
Have a look
Paul
-
1
-
-
superb paul
fantastic decals, would very much love a set. totally understand the one off reasoning though, it sets his artwork off a treat.
cant wait to see this done
Hi John
Im running a bit behind with this one,just started building it with the wings and cockpit,and painting engines, cockpit and front gear bay.
Oh well ive got just under 2 months
Paul
-
Hey everyone,
Just finished this one for a "Support Aircraft" GB. It's Revell's little EC-135 (Bundespolizei boxing) but built as a West Midlands Air Support G-SUFF. Markings are a mix of the kit with the G-SUFF stuff courtesy of Peddinghaus Decals; they also do decals for a Met Police EC-145 so might give that a try sometime. This was built mostly OOB except for some bits for the observer in the back and a more accurate Nitesun/FLIR package than was offered in the kit.
You can see work in progress pics here and apologies if the photos aren't the best.
Thanks for reading and enjoy your modelling.
Dermot
Hi Dermot
This is what G-SUFF should look like as i make for West Midlands Police Air Support exclusively.
-
Hi Dermot
Im afraid you have the wrong G-SUFF,I make the offiical models for the West Midlands Police Air Support and there are a number of issues concerning this model.
Firstly,G-SUFF is a EC-135 T1 version with high leg version the one you have done is a
P2 version
Inside is wrong as well,colours,equipment.
Outside is wrong as well the FLIR POD is located in a belly pod.The Searchlight is mounted at the centre line rear of the belly pod
Also the decal manufacturer have not permission from West Midlands Police to produce these decals and are breach of copyright.
I had to get permission to do mine from West Midlands Police.
I wish you would have contacted me first
Paul
Parkes682Decals
-
Am I missing something or is this a Whif???
Hi Gary
Yes,this a "What If Scheme" i have drawn this for myself.
There seams to be a modeller on Locate and Cement website who claims to be the owner of the artwork,i shall be using for my own personal use in my private collection and will not be releasing it for general issue
There will be alterations to my scheme to my own designs,and i will not be using his crest.
The union jack has been used on several aircraft designs so the only the country owns the copyright as like flags,and butting.
Paul
-
Any chance in 1/72?
Hi
yes they can be reduced to 1:72
Paul
-
Hi All
Here's for all the Tonka and Hawk fans amongst us
Ive working on a Tornado GR4 "Queens Jubilee" tail markings heres the photos
The sheet includes both tails on a white tail,then white crown crest's in the middle of the red cross.
I will be doing them in 1:48th scale, and i will be doing a Hawk T1/T2 as well
Paul
-
Hi All
All i have left is the following
2x Viking
3x Comet
2x 747 jumbo jet
1x Tristar
2x Empire Flying Boats
2x Alberene ?
1x Viscount
2x Concorde
£3 each plus postage to a new home
Paul
-
Hi All
Ive got 24 of them in a plastic bag most are sealed in there bags i think i have the full range well possibly 2 or 3 of each.
I was going to put them on ebay
Anybody out there wants them at £3 each can have them,plus postage
I will sell seperately
Paul
-
Very nice, how much for a 1/48 set?
regards
Chris
RAF Odiham
Hi Chris
PM sent
Paul
-
They look really nice . Have you considered doing them in 1/144 too ? Revell's 1/144 Chinook is a lovely little kit
Hi
Yes they can be done 1:144 some of the artwork would be very small indeed to make out
Paul
GB Chat
in Airbus A380 Single Type Group Build
Posted
Hi Mish
Ive got my A380 "First Flight" done i finished it yesterday just haven't had time to put on Britmodeller,still painting "2012 British Pride" ready for decals.
Paul