Fuad

Gentlemen, I was well aware of the color of this crowbar and the painting scheme also says to leave it green. This is purely my prank🙂, if I can put it that way - it's my personal tuning😘 . Forgive me if you can.

In fact, there should not be a protective grille, but a gaping hole. But when applying the decals, it so happened that the shark lost part of the teeth on the lower jaw)). To save the shark's teeth, I had to make a lattice and paint its teeth on this very lattice.

Good evening, dear ladies and gentlemen modelers. This time again I present to you Spitfires from one of the best model companies. You can't have too many Spitfires!😊

Good evening, dear ladies and gentlemen! Let me present you one of the prettiest aircraft ever (in my mind).

Yes, it's 23 years old model from AMtech.

Good evening ladies and gentlemen! I present to your attention my next model from the “What if?” series.

Yes, it is. And some paint job made by hand brush.

Good evening, ladies and gentlemen modelers! I present to you my next model of the legendary Zero from an equally legendary model manufacturer - Tamiya.

GWH

Good day, dear colleagues! I present to you the next model from the Azerbaijan Air Force series.

Good day, ladies and gentlemen. I decided to start a series of aircraft that are in service with my country. This is a training aircraft from the Czech manufacturer Aero.

I think these are exhaust gas deflectors.

Good evening, dear colleagues modelers. Today I present to you my next work from the Polish company ARMA Hobby. This is a brand new model and is simply beautiful to build. I had great fun putting it together. I practically didn't have to modify anything on this model and I didn't use any aftermarket.

"The idea of a canard-based design originated with Lieutenant Commander Masayoshi Tsuruno, of the technical staff of the IJN in early 1943. Tsuruno believed the design could easily be retrofitted with a turbojet, when suitable engines became available" Wikipedia

This aircraft was designed for a jet engine. He's awkward with blades. With such high landing gear, it was doomed to emergency landings and even takeoffs and was of little use for operation. Obviously, with a jet engine, such high landing gear would not be needed and the aircraft would become practical and airworthy.

Good day, ladies and gentlemen! It's my next model. I chose this color because the model showed weapons that actually weren't there. This sealed the fate of this model as a “What if?” The prototype of this aircraft actually fell into the hands of the Americans as a trophy. But it was not put into operation. And yes, I know this is mid-WWII paint job. But the trophy was received at the end of the war and therefore could hardly have been painted like that.

Hi, everyone. I present you my first model in this year.

Good evening, dears. Let me present you my next model.

Hi, everyone! It's my first model of aircraft in this year.

It's Pledge Floor Gloss, formerly known as Pledge FloorCare Multi-Surface Finish, formerly known as Future.

Yes, I agree. A dilemma arises. If you make it from metal, then you will need to make runners from them and also add a flat weight under the floor of the cabin. What confuses me more about this idea is the heterogeneity of the metal structure and the need to combine different profiles. Apparently some of them will have to be left plastic, but at the same time the thickness will have to be significantly reduced. For example, I mean the beam to which the rear direction screw is attached.

No, unfortunately my soldering skills are not enough to make such a complex design. This is plastic from a set, which is at least twice as thick as the original.

This is my first civilian car job. And so I have been doing aircraft modeling since I was 7 years old🙂. I am 51 years old))

This is entirely the merit of Italeri. I didn't do anything with it.

Hi everyone! Let me present you my next model from "Italeri". The truth is that this plastic model is physically incapable of depicting this sleek helicopter to scale. To do this, you need to solder the tail boom from metal rods.