harvy5

Very nice AQUARIUM !

Su-25, my love! He started well, but you need to modify a little color. I try to find my old photos of UB version

Thank you, grandfather was very happy.

... again little progress. Modified elevators and fuselage in the place of attachment. Problem with inclination windscreen I removed. Sanding and Evergreen are good helpers.

My older project for my grandfather, in this type ended his aviation career. It typically Trumpeter, so it a lot of work.

Very nice work , but you still have one mistake. Number one 1106 had MiG-19PM . Mig-19S with red wingtips have numbers 0011, 0210 and 0218.

... and the R-3S missiles will be perfec!

Excellent work

Very nice model. But the stainless steel sheet in the barrel cannon were usually polished or painted gray color .

Again I looked at everything and here is the result. End of the windscreen must be increased by 1.25 mm. Blue tape on the right shows edge of the frame.

I watched your work. I'll probably have to make a new windscreen. The main problem is bad inclination armor windscreen. Other shapes are OK

... a few little things. Wings have the right shape and size. I started to work on the main gear bays.

It's not entirely true. Famous turquois received a M version. Versions PF and PFM have received and after overhaul. Turquois color will started using to change the cockpit illumination during the night flights.

... I know about it, but now I do not know how to fix it ... and I want more, Su-22M-4 and UM-3K ...

What looked like a nightmare, it was not so bad. Sanding and sanding and wing has the correct profile. Of course it was necessary to modify certain shapes, especially landing flaps Wings in position before take-off. Version M-3 and all previous versions Su-17/20/22 in this position using only slots.. It will be interesting ...

After a week there's another little progress. I gave right shape the tail fin. In the next step, I corrected the top part fuselage. The fuselage has finally right shape and this weekend waiting for me correction wings ...

Yes, it is.

Today, little progress in the cockpit and the front wheel well And now waiting for me sanding, puttying and rescribing... Air brakes are OK! I don't know yet what with wings. I'll probably make new.

Very nice and perfect work. It is definitely one of the options to complete my model.

The break at work on Frogfoot, I started another project. Su-22M-3K is the export version of the Su-17M-3 with engine R-29-300 also used for the Mig-23.Differs mainly the rear fuselage and rudder.Were exported to Hungary, Peru, Libya, Vietnam, Syria, Iraq, Yemen and Afghanistan. Since I am lazy, I used the rear fuselage of the model Su-7 OEZ Letohrad. Su-22M3K were used seat K-36DM early versions. I used therefore modified the seat from the set RESIN ART for Su-25th In this set, I used the control stick.

... continue with other differences. I started to work on the seat. Seat K - 36L was the old version. WARNING!!! This color cockpit had only Czech-Slovak aircraft after overhaul. ... front wheel disk. Su-25K 6019 was one of the 5-6 Su-25 in Czechoslovakia, with tubeless front wheel KN21-2. Camouflage is my reconstruction according to original photos 6019 . I have not documented only right wing. Any drawings published so far are badly.Some photos are here ... http://modelweb.modelforum.cz/en/2011/12/16/walk-around-na-su-25k-6019-anca/#more-11100

... little progress , stabilizer ... ailerons and air brakes.

Modifications of the original model consists mainly in two substantial details, ailerons and tail section. Tail section is only for aircraft 10th series and SU-25UB. Earlier this series are part of the difference. ... tail section into the serial number 9014 ... ailerons I used to repair adjusted tail section from the model Su-25UB. This shape occurs only version of the Su-25T and TM and last UB. Models Trumpeter ...

... and several surface corrections ... I corrected the shape of cover SPO-15

Fuselage ... ... wheels bays AIRES