roginoz
Sadly Missed-
Posts
740 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Media Demo
Everything posted by roginoz
-
That's a most convincing wif and an interesting departure from the usual livery. Is it just the angle [last pic] or is the engine cover a bit on the skew ? Good looking build, Dave Rog
-
Great user name !! I'll bet the poster above mine would be in the market for it......... Welcome to the best modelling site on the net. Rog
-
Many thanks, Julian @zebra, that's most helpful. While reading your advice and rotating the engine in the body of the HOK, I can see where I'm going wrong. The indentation in the top edge of the engine was flashed over and I totally missed its existence ! Doh !! Reckon you've put me on the right track for which, my grateful thanks. I reckon, even if it's not in the exact orientation, at least it's in the correct position, and if the destructions had been more explicit, we {I} wouldn't have these problems. One more off the Shelf of Doom ! Rog
-
Love to know how you managed to fit the engine, Julian @zebra 'cos that's the bit that's holding up my model, still on the Shelf of Doom. Agreed, the instructions are as vague as #### , I've tried many orientations to make it fit but without success. Any extra clues that may have escaped me would be gratefully received. Looking great so far, completion not far off. Rog
-
I don't think we need to go anywhere near the Martian convenience.............
-
Armstrong-Whitworth F.K.8, 1/48 Copper State Models
roginoz replied to Bughunter's topic in Ready for Inspection - Aircraft
Another museum quality build from the @Bughunter bench !! Absolutely beautiful, Frank ! Rog -
Cheers Julian, no, there won't be a 5th, it's too far gone. Nevertheless, I manage a pretty active life [for an 80 y/o and just take it a day at a time. Agree about seeing so much before, another reason [excuse ? ] for my non-attendance, I HAVE seen so much before, and I wish HARS would put in an appearance. Lucky sod, getting to Fairford, still on my, by now somewhat leaky bucket list........... Rog
-
Great photos Julian @zebra, keep 'em coming. Was all geared up to go but, seeing the weather forecast [hot] and knowing the photo difficulties in the afternoon, coupled with gradual recovery from my 4th spinal op, decided to give it a miss. Avalon really is one of the worst airfields for photographers, but your results prove it's more than possible. Would have liked to see the Black Eagles and the Canberra in flight, last time I saw it, at Temora, it had its engines out for maintainance/refurbish, great to see it back in the air. Cheers, Rog
-
A good kit of a good looking aircraft. Built it myself and guys at the model club mistook it for a Sea Fury......... What ? with those markings ?.......oh well ! Rog
-
Site very slow to load, more Service Unavailable screens
roginoz replied to Alan P's topic in Help & Support for Forum Issues
500 error loging in @ 12-01 AEDST. First one for a week.........a marked improvement. Rog -
A Group of Gals - Two Revell B-17Gs and a Hasey Friend
roginoz replied to CedB's topic in Work in Progress - Aircraft
Used AK True Metal on a spare fuel tank on your recommendation, @CedB and I must say I'm impressed. As suggested, a tiny amount well scrubbed in, it was dry in less than half an hour and no lifting or residue under masking tape. Won't be the last time I use it, many thanks for the tip. Thoroughly enjoying your B-17 treble build and the museum pair will, I'm sure, be much appreciated when they reach their final destination Cheers, Rog -
Pics don't work for me .........????? Rog
-
Agreed ! The instructions are singularly vague about their placement, as I also found to my cost. Your build's progressing nicely though,Martin @Grandboof. Rog
-
Oh yes it did ! As soon as I hit "submit reply", bloody hiding !
-
This is what happens when you gentleman's parts a balloon.......... What ??!! Nothing happened ! The 7th word ends up referring to "gentlemen parts"......... First time I've used the word without it being "corrected", autocorrect must be asleep.
-
Curtiss P-40E - Klimov engine Two seat trainer
roginoz replied to Ed Russell's topic in Ready for Inspection - Aircraft
Brave men !! -
Revell RML to RM open top conversion
roginoz replied to Old John's topic in Ready For Inspection - Vehicles
Brilliant !! What brand is the tartan paint ? Rog -
You're a brave man, Julian @zebra ! Hope you can control all the pe pedal supports and keep them from the carpet monster. Also I hope you have more success orientating the engine than I did. The model continues to sneer at me from the shelf of doom. Good luck with your build, I have every confidence that you will tame it ! Rog
-
Thanks Mike @bootneck, I'll check them out. Don't imagine they're very exy. Rog
-
Hi Mike @bootneck, can I ask about the motorbikes in the background of your photos. Are they kits and, if so, who kitted them ? TIA, Rog
-
Thought it was all our left overs you were copping. Hope you all get a bit of respite and damage is not too widespread. Rog
-
Reminiscing on my days at south station
roginoz replied to Stickframe's topic in Ready For Inspection - Dioramas
Wondered where this had got to ! Followed it all the way until is seemed to drop off the radar, possibly with the onset of The Great Plague, and thought about it from time to time. The time zone difference may have had something to do with it as I often don't go back more than a couple of hours when I tune in in the mornings. The work in progress that I did follow, probably without comment but definitely with admiration, was a masterpiece of imagination and great modelling, with great input from Pete & Ron. The end result - just fabulous, so evocative of McQue's imaginative artistry, and I'm rapt to see it in its present completed, but probably never finished state. Words fail, this is just so bloody good !! Rog -
I have never had success using vinyl masks, without fail, they will lift over curved surfaces, leak round the edges and often leave a sticky mess when removed. On one occasion, attempted removal succeeded in removing the canopy as well, despite it having been applied with CA. Any kit that comes to me with vinyl masks sees them swiftly consigned to the bin. Tamiya tape is far more forgiving and effective. Really enjoying your build @David H, a model I must get hold of. The engine mountings are especially effective and I love the faded dayglo. Rog