Jump to content

cema_ga

Members
 View Profile  See their activity

  • Posts

    396

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by cema_ga

  1. cema_ga
    Thank You! Interesting method. I believe that most of the problems with my kit were because of worn-out molds. My other Eduard's 110th is E-model from first production run (olive colored plastic and dog miniature in the box). Hope, except of bad engine nacelles to wing fitting (unfortunately, this is the feature of the Eduard's design of whole 110 series in 1/48) the other troubles will be easy solvable. Shimon
  2. cema_ga
    Yes! Thank You for pointing on this! Totally idiotic error from my side 😰 I will fix it before taking the final photos. Shimon
  3. cema_ga
    Hi comrades! Here is my take on new Airfix kit with some aftermarket. So far, the unpainted brass interior part were installed. Next stage - interior painting and painted brass assembly. Thanks for looking
  4. cema_ga
    Hi comrades! The 110 weathered and finally assembled. OOB FuG-202 antenna was replaced with AML. Exhaust pipes were replaced with Eduard resin. Better photos will be in the RFI section soon. Hope you like the result. Thanks for looking
  5. cema_ga
    Thank You! I built limited run kits with better fit...But I hope the result will be OK.
  6. cema_ga
    Thank You!
  7. cema_ga
    Hi comrades! So far main assembly (including the canopy), priming and painting done. Thanks for looking!
  8. cema_ga
    Hi! I bought recently the Airfix 1/48 kit of the fighter subvariant F.18 and i'll try to build the fighter-recon variant FR18. The side looking cameras are included in the kit, but the two belly openings should be added. Any drawing/picture will be helpful. Thanks in advance
  9. cema_ga
    Hi Comrades! Despite problematic fit, the office finished and main assembly done! Nose cannon funnels added (in the kit they are represented by simple openings:( Clear navigation lights on the wings were built from scratch AIMS update set even if partly use (as in this build) is very good addition! Now - acrylic putty (some minor gaps) and canopy assembly with lots of brass details. Thanks for looking!
  10. cema_ga
    Hope to see F-101 series available again!
  11. cema_ga
    Hello, comrades! My next build is Eduard's recently issued profipack of Bf-110G early variants. Overall over engineered kit made on well used molds gave in result the very time consuming build. Fit is at the level of intermediate limited run kits. Special thanks to Eduard for nose guns cover made from two parts (resin and half of plastic part). I believe, single resin part is much more appropriate here... I started with most problematic assemblies - wings&nacelles and nose. So far one wing assembled, with minimal use of acrylic putty. Second wing and nose are in process. https://i.ibb.co/KzjmHcs/06.jpg Thanks for looking
  12. cema_ga
    Linked to Feb-2022 leaflet
  13. cema_ga
    Original crosses looks applied by brush. And they are sharp edged on reference photos.
  14. cema_ga
    Hi comrades! So far: main assembly done and the airplane primed. Almost all the decals were replaced with masks. All tactical markings were painted. After this, irregular camouflage crosses were applied with Molotov marker After this the only decal stencil was applied, Hinomaru and black surfaces weathered, panel lines highlighted, exhausts and oil leaks added. Next stage-chassis assembly and small parts installation. See You in RFI section in the next couple of weeks. Thanks for looking!
  15. cema_ga
    Hi comrades! Aft part of the engines added from scratch (without reference) - should be better than nothing. Everything painted, fuselage windows installed. Navigation lights omitted (no clear parts provided) by Hasegawa added. Wings assembled. Next stage-fuselage closing and main assembly of the plane. Thanks for looking
  16. cema_ga
    Hi! Sure! Here is my reference and first try (and I know-the crosses should be less uniform and more dense). I will try more for the better effect
  17. cema_ga
    You welcome!
  18. cema_ga
    Hi comrades! I'm start the Ki-49 build. This build will include the Eduard brass and canopy masks and some scratch additions. So far, the fuselage interior assembled and ready for painting. The main wheel wells interior is totally absent in the kit and Eduard set, so I built it totally from scratch. And without references. Thanks for looking
  19. cema_ga
    Yes, Middle East desert camouflages are interesting. This specific is Soviet factory applied, but most of the Fitters had domestically designed and applied camouflages-great variety of schemes and colors.
  20. cema_ga
    Thank you !
  21. cema_ga
    Thank You! It's Phantom sized, but the bombload is hardly half of Phantom's load. To make things worse-the internal fuel is short-so need of external fuel tanks instead of bombs...
  22. cema_ga
    Thank You! It was half a year of pure pain), and it's a lot things screams to be improved (riveting...)- but I started to lost the interest...
  23. cema_ga
    Thank You! Window sealing is airbrushed. I used the dedicated New Ware mask, Expert variant. They includes the window sealing.
  24. cema_ga
    Thank You! And it's a plenty of variants of desert camouflage!
  25. cema_ga
    And now in RFI section
×
×
  • Create New...