Leaderboard

All, Some pictures of my completed 1/72 Matchbox Armstrong Whitworth Siskin between the wars fighter. Built mostly OOB with some very minor detail work creating basic cockpit, separating the control surfaces and reducing landing gear struts to make it appear more weighted down when on the ground. Rigged with very fine sewing mending thread (monofilament) and brush painted as always. Constructive comments welcome Regards Dave

Hi everybody, The goal was to finish in early November and for 30 min and the bonding of the antenna is good. Here is the Stirling Italeri in its version of para / glider tug. I just have to find him a place in the house now because it does not fit in my showcase Hope you like Joel

Nowadays with the upcomming AZ-Model, we will have an easy way to build a Bf 109 G-6/AS. But a while ago there was no AS Version available and so I did a kitbash, using the fuselage of Revells G-10 and the wings of Academys G-6 togehter with PE cooler-flaps from Eduard. Additionally I repositioned the landing flaps and the elevator. Revells G-10 was partialy rescribed, it got a new propeller from quickboost, and I reworked the oilcooler, the MG openings, the supercharger inlet and gave her a CMK Resin Cockpit The 109 is painted with Gunze Acrylics in RLM 75/83/73. Weathering was done with several airbrushed shadings and oil colors. It shows a JG 4 plane from the 4. Gruppe/ 13. Staffel flown by Uffz Friedrich Zenk.

Hi everybody, as said my first RFI and first time using a few new techniques (varnishes for decals, washes) so be gentle! I am also well aware of a MAJOR gaffe I made on the tail.... Have done many RAF planes but I was so focused on positioning I put them on the wrong way round . Aside from that I'm very pleased with myself and the finish, my best ever I think. I opted for the RAF Valley based squadron as I was on annual camp there twice with the ATC. Also painted the wings in Hu 166 as I have seen pictures of them like this, and it is a sexy grey... Though I haven't a clue if this is accurate. Perhaps someone could enlighten me. Also apologies for the poor quality smartphone pictures and lack decent setting, the bathroom just happens to have nice bright lights!

Airfix Boulton Paul Defiant. Here is the link to the WIP Thank you for looking. Joe.

Well, I made it back from the windswept shores of Lake Erie and what's more.. I passed my exam!!! Now I'm back I have another 10 weeks of weekly assessments then straight into exam number 2! Oh goody... NOT! Life kinda got in my way upon my return but I have finally managed to snag a few moments dans la basement. I am desperately trying to get to the point where I can get the last coat of semi-gloss on but I keep finding things that need done first. As I left my last post I had managed to make one o' them thar sticky-outy sharp thingies. That is now fixed in place, painted, and pointing backwards as per my reference photo's. As a slight diversion I decided to tackle the winch hook. Italeri have molded it as a sold disc, and just for a change, *cough* I didn't like it. After some mulling over the issue I decided the best option was to carve out the existing disc to make three spars - that allowed me to make a small brass ring that was the ca'd in place around aforementioned spars. Then when it's all painted up and glued into the winch I think it looks a bit over-scale but I'm drawing a line at this one. Since the trans deck door will be down, very little of it will be seen, so in this instance I think it will suffice. Moving along, it was time for more aerials, this time the towel rail hanging off the port side. I don't believe there's anything supplied in the kit for this one (though I may have cut it up for something else) so I had to roll my own (again). As you can see here, I had loads of fun making aerials then deciding it wasn't good enough - I'm going with the one at the bottom. The top one was made from some solid brass and some wire - took me ages to file down the pins - then I decided it was way too big. That led me onto version number two - this time I used some small diameter brass tube squeezed in the vise - and then I couldn't figure out how to attach it securely... which brought me to version number three - this time I didn't squeeze the brass tube quite so hard, which left a small gap between the walls (see below). I then clamped some brass wire in the vise to flatten the end down - then the flattened end of the wire slid nicely into the almost flat tube, and a touch of solder was flung on to keep everything in place. Then followed a quick run over with the file to clean things up and I added some styrene at the bottom end to create the bracket mounting. In the photo above you can see that I made two plates to mount the aerial on - I spent ages looking at photo's before I spotted the "plates" then took ages to make them, get them in the right place and drill the mounting holes..... wait for it.... Then I realized that the "plates" were not in fact plates at all, merely a small lip above and below the aerial - thankfully this was spotted before I slapped any glue on the beast. Today I must have spent at least an hour and a half trying to finish the aerial off - the 1:1 is chrome with aluminum (I think) mounting brackets. I tried using BMF but when I finally got the darn stuff on (took forever!) I thought it looked to chintzy. The I tried painting it, then I painted it again, then I stripped the paint off and then I painted it again... which is where I am at now. The brackets will get a smattering of some kind of aluminum paint and that should be it ready to fit. And didn't I mention somewhere that the rotor head was now finished ???? Yeah, I was wrong again... I forgot that I still had to make the droop stops. I had made one a as test a while back, just to see if I could do it - now i had to make the remaining three, well four actually - when I test fitted the old oner I discovered it was too long so I had the make the new ones a good deal shorter.. this is about the limits of my skill shown here. Yup, there's brass rod top and bottom, with three uprights - and yes I was stupid enough to fit a "spring" around the center post. All four are now painted and should be fitted to the rotor head tomorrow. ... and I still haven't got the darn thing sprayed with the semi-gloss yet!

IPMS Portugal launched the challenge to its members: build a T-6 at 1:100 scale to be displayed in Telford next November.

Good day, jentlemen! This is my next model.

Hi Guys for the BC display at Telford this year we have the Stirling on show as it'll be 75th anniversary of their introduction into service. With this in mind I decided to build N3640 as it was the first one issued to a Sqd, in August 1940, for evaluation purposes. There were some notable differences which I had to get in so here goes. The mid upper turret needed deleting, there is some evidence that the early ones had the mid under turret but I couldn't see any evidence from the piccies I had so I went without, probably be proven wrong soon. The two masts under the nose needed to be deleted, fairly easy. I fertled about with the wing leading edge intakes. Having gained two spinners from a friends Wellington kit I had some job searching for another Wellington kit but at Newark I found one and finally had 4 spinners I could cut down for the props, as this a/c had them. I had to drill extra windows to both port and starboard sides but can't remember how many without having another kit to hand so I can compare. By the way, I used Humbrol clearfix to glaze them and they look great but how is it best to use this stuff, it strings like mad and leaves a residue on the paint job, wouldn't have been a prob but I had matted the paint down and it spoiled the finish a bit. I sanded down all the rivet detail and scribed some panels back on. All the exhausts on this a/c were outboard on the engines. I deleted the hedgehog bits and had to shorten two of them so I had a complete set. The blurb I read said they were high up on the cowlings but I think I went too high. Painting was done using Xtracrylics but I'm not happy with the yellow. Decals were from the spares box and the landing light cover, which has been fitted since I took the pictures, was fashioned from sellotape. The wheels were from Scale Resin bought from the big H, I thought the rear wheels would be a bit weak but they've stood up to my moving the kit around. For now at least. Regards Paul

Hi all, here are some pictures of my last completed build. It is the very nice Zvezda BF 109 kit (F4 version) finished as a plane from JG 77, flown by Heinrich Setz, in Crimea 1942. The decals are from an Authentic Decals sheet. Paints are Gunze acrylics. I hope you will like it, best, Christian.

HI all! Today the Russian whiz. A quite good kit, wich made a lot of fun. Also finally something else than our evergreens 109, Spit and all these things. Best regards Andy

First posting of a model on this forum (sorry, no WIP). Completed using Vallejo Acrylics, Panel washed using Windsor and Newton inks. First time doing pre-shading, but I'm very happy with how it came out. Dave

After registering and introducing myself in the "New member" section, http://www.britmodeller.com/forums/index.php?/topic/234990577-hello-from-cologne-germany/ I would like to show some of my models. I hope it is ok to show some work that has been posted somewhere else before. I would like to start with this Junkers Ju 88. It was done mainly OOB. I painted the A-5 with Gunze Acrylics (my favorite brand), gave it a wash with oil colors and finaly weathered it with Tamiyas Weathering Sets. This plane flew with the KG 30 in Finnland 1941/42. The Kit-decals are rather simple (only crosses and and unit markings), so I added some stencils from the Revell kit. Comments and criticsm are welcome.

After placing yet another ill fitting jet on the shelf of doom, I thought I'd try a new direction and decided on WW2 single engined fighters. This is the Tamiya kit and what a great little kit! No hassles putting it together at all. I didn't pay too much attention to accuracy, I just went back to basics. A week to build instead of a two month jet slog has given my mojo a lovely little boost! I used Xtradecals and painted with a mix of Humbrol, Revell, Mr hobby and Tamiya paints. Anyway, the pics (not the best quality as I have to rely on the sun and it aint around.. Excuse the broken cannon which I snapped off during manoeuvres ) : Thanks for looking!

I got two coats of matt varnish on this yesterday and added the final details this morning so I am calling the aircraft part of this build done. I still need to do some work to organise displaying it, but because the 109 is now going to feature alongside it I need to crack on with that build. Hopefully going to make it. I would just like to add my thanks to those of you who have stayed with this build and for all the help and support given.

Hello modellers, just finished my first seaplane. Mostly OOB with just few additions in the cockpit and cut of tail control surfaces. The hasegawa kit is not the newest but definitively great quality and really enjoyable. just the decals were a bit out of register but nothing dramatic to adjust. Painting has been done with airbrush using Tamiya Acrylics and Tamiya spray for finishing. Comments and suggestions are always welcome. Enjoy the pictures and thanks for looking. Cheers Andy

On another note, any Father who reads Kipling to his offspring is an absolute hero in my book.

Hello to all. My latest finished model. AV-8A from Airfix in 1/72, completely out of the box, just added harnesses to the ejection seat and a few buttons to the side consoles. Great kit, great fit, just a little issue with the intakes (inside) but everything went fine at the end.

On a model railway forum I visit (don't tell anyone I said that...!!) they have a number of these 'buttons'. When first introduced, replacing the single like button, everyone poo-poohed the idea saying they'd never use them, what a wastte of time, etc etc. Now I think everyone thinks they're a great idea! You have the usual like, together with agree, thanks, funny, clever/craftsmanship, informative useful, & friendly/supportive.... Keith

Cheers fella nice of you to say so Got the masks on and was somewhat unsure about them at first, mainly due to the various sections not meeting perfectly across the fuselage halves or between fuselage and wing, although a little extra work with scissors and some masking fluid sorted that issue out. Really should have taken a photo at that point but... I got carried away With all the masking off I'm really pleased with the results. Only the wavy wing leading edge will need more work;

Thank you very much, Gentlemen. I appreciate your interest and kind words. Thanks particularly to Sergey for an very interesting and useful photograph. I had some false starts on this over the past couple of weeks, as I had no choice but to guess regarding the manner in which the motor was mounted. I had seen two methods on Farmans, one a sort of four-point star, and one a truncated pyramid. I tried both, and in doing so realized I had botched the motor, which to engage any mounting would need more crankcase behind the cylinder bank. Then I got lucky. I had put up an inquiry on a small forum dedicated to the South African Air Force, and a fellow there came up trumps, providing pictures which not only showed the manner in which the machines operating in German Southwest Africa were marked, but showing the motor clearly from the port quarter, up pretty close. Wife put the old picture through Photoshop, cleaning it up to show even more detail in the shadows, and so I was finally able to make the mounting work, and o so with some confidence I was being at least reasonably accurate. It was necessary to reconfigure the rear of the nacelle a bit, but nothing too major; a couple of cross-pieces had to come out, and a few other bits and bibs. And while ll of this was going on I got the interior painted, partially rigged, and made the nose 'cap'. At any rate, here are some pictures of the new engine in its early stages, fit into its mounting on the partially re-configured nacelle rear,,,, The nose 'cap' is just resting in place. This was made from a block of two rectangles of 2mm sheet laminated together, after which everything no the desired part was cut and sanded away. A bit of extension was added in the rear on each side, but these may be cut off, as they do not seem to be evident in the S.A. pictures. Wife has previously remarked on seeing items like this that they resemble the 'stick on' nails girls use nowadays, buyable by the pack in the beauty section, and she may have a good point.... Here is a look at the nacelle rear in final form, ready for the motor to be attached.... Here is the new engine, painted, about mid-way through, front and back... Copper tone is a wash of brown over sprayed silver, topped with clear orange (washable marker picked up with Future). Finally, here is the motor attached to its mountings at the rear of the nacelle. I can now proceed to the relatively straightforward business of furnishing the 'office' for the crew, after which I will do the fuel tank, finish the exhaust arrangements and fuel feeds, PAINT the thing, and then do the radiators and water-feeds. I feel reasonably sure I can get that done over the coming weekend....

With my latest build very close to completion it's on to the next build, Kopro's boxing of the Sukhoi Su-25 Frogfoot to be built as Ukrainian machine in the latest camo scheme. And the extras............................... I'm planning on using some of the panels from the MIG-21 set on the same shaped/sized panels on this kit, mostly consisting of the round ones on the engine pods. And finally, what I hope will be a cracking set of decals.........

I hope as a newcomer I've posted this in the most appropriate place. It was posted by Al Bowie on HyperScale, but I thought some may enjoy it here too if it has not been posted before: This Fantasy Kit site with really well done mock-ups of box-art. Mainly Airfix, but a large number of Matchbox and others. https://www.facebook.com/fantasykitworld

Airfix new models, a 1/48 model I didnt like it too much. Some problems at construction and the body doesnt fit so good Never mind, try the quality of plastic and details. An English Land Rover in Bosnia, just in the middle of a Serb protest and got some damage All made by brush and vallejo acylics, oils and pigments.

I can only applaud Martin's grown-up attitude to the situation, and would advise anyone to assume that the person they are discussing is able to read this (it is an open forum as far as reading goes), so not to use derogatory wording about a company's business decision, just because it doesn't meet with your approval. More power to your elbow Martin & Sio

Here’s my rendition of the Arii (originally produced by Otaki?) 1:48 scale F4U-1A Corsair. Even though it was first issued in 1972, the Arii kit builds into a nice Corsair. The good points are very accurate outline and shapes, finely recessed panel lines, and great parts fit. Drawbacks are a simple and inacurate cockpit and wheels, and an engine that doesen’t remotely resemble any engine used in any aircraft. Here’s how I upgraded the kit: I replaced the cartoonish engine with with a resin R-2800, updated the cockpit with Eduard photoetched insturment panel, seat and sidewall details, and used seatbelts and wheels from True Details. I replaced ther kit tail wheel with a more accurate-looking one from the spares box, and attached it at an angle for a more candid appearance. I also cut away the flaps and dropped them, added exhaust stacks made from drilled-out styrene rod, and added a small whip antenna to the fuselage spine. I couldn’t determine if this plane had the tail hook removed or not, so I left it on. VF-17’s Corsairs didn’t have the usual antenna mast, and some had unusual field-modified antennas. Based on photos, I built an antenna that runs fron the top if the vertical fin down to the tip of the right horizontal stabilizer. From there, it runs into the usual antenna lead-in on the right side of the fuselage, behind the cockpit. I don’t know for certain if it’s accurate, but that’s how I interpreted the antenna arrangment in photos. I used a Pasche VL airbrush to apply the three-toned camouflage scheme, though most photos of the actual aircraft indicate it was very weathered, with almost no distiction between the non-specular sea blue upper surfaces and the intermidiate blue sides. For markings, I used an old SuperScale sheet to portray “White 29”, the plane flown by Lt. Ira Kepford of VF-17 while based at Ondonga, New Georgia, in the Solomon Islands in late 1943. I made a mistake in not placing the kill markings at the correct angle to the tape covering the seams of the forward fuselage cell. VF-17 was the first navy squadron to be equipped with the Corsair. Assigned briefly to USS Bunker Hill, the squadron was soon transferred to the Solomon Islands to serve as a land-based squadron. In its two tours of duty in the Solomons, VF-17 was credited 156 aerial victories and produced 12 aces, the most of any squadron in the Navy. Kepford was the U.S. Navy’s 6th highest ranking ace with 16 victories and 8 probables.

Hobbyboss kit with resin Aires ejection seats, main wheel bay and weapons from Eduard Brassin series ( AIM-9, GBU-10 and Mk.82 bombs on MER's ). I used Xtradecal sheet for the markings.

I'm happy today.... seven years after my previous finished work (Sh60B 1/72) I can call another one a finished one.... Very happy indeed... There are things that could be improved, of course, but i'm very happy with the results... Mostly having in count that is my first civil vehicle and my first 1/32 model... This model is dedicated to all of you that posted in my WIP thread. Thanks a lot

Hi folks, Here are some glamour shots of my completed Beaufighter. Apart from tape seat belts, it's completely oob. I wanted to get the 'vibe' of the kit, before building the others (4) in my stash more seriously. Scheme is brush painted with Xtracrylix. I am seriously impressed by the kit. The vast majority of the build sequence is sensible, parts fit where they should and overall assembly is pretty simple. Two things I will mention though: 1) Engine cowlings: Suggest you glue the cowling pieces together to form the complete cowling, let dry, then add the engine, rather than assemble the cowling around the engine as the instructions suggest; 2) Undercarriage leg supports. Ensure these are trimmed to fit neatly in the slots provided. The fit is tight and it's a somewhat awkward squeeze to install them. Anyway, here are the shots: RFI thread here: http://www.britmodeller.com/forums/index.php?/topic/234989610-airfix-172-beaufighter/ regards, Martin

You know Martin, I'm looking forward to saying hello in person one day. Your attitude and approach is first class.

Airfix Boulton Paul Defiant Finished. Thank you all for looking and your post during my WIP. I've put some photos in the Gallery Joe

Thanks Beard Big day today... Masked by Ced Bufton, on Flickr DG on by Ced Bufton, on Flickr Make sure you move other parts out of the spray booth - rats. Had to do these again: Oops by Ced Bufton, on Flickr Mask off by Ced Bufton, on Flickr Out to dinner tonight and Yeovilton show tomorrow so probably doing a bear impression (big paws) Thanks for looking!

I have been shamed by my lack of industry. Somewhere Lord Tebbit frowns disapprovingly and knows not why. (I always wondered if anyone ever made decals for his Vampire from his RAF days -- one could do a dogfight double with it and whatever Tony Benn flew.)

Keeping us all in suspense until Telford when they announce their new Victor, Blue Steel version. Well, I can hope, can't I?

here are pics of my Ventura Spit 'XIV. I built it many years ago around the 80s or earlier not sure now. Any how, they illustrate the look of the kit and I have also included a couple shots of the Fujimi 'bubble top' XIV for comparison. In the original issue as this one was, the cannon,prop blades, exhaust stubs, u/c legs, control column were in white metal and a piece of fine gauze was also included to fit in the underwing rads. Later issues by Ventura did not have these metal parts so much due to 'elf n' safety' regs or something like that. I know the tailwheel is AWOl on the silver one and am looking in my Spitfire spares to see if I have one there. I'll do pics of my unbuilt Ventura kit next so you can see what the is like for those that don't know it.

Tail Fix started, the pictures say it all I think...

I really shouldn't drop these into a thread about Stirlings, and that kit DOES look fun but... I sold a few of these over the years, it looked after me better than the Hurricane book has! A few from years ago. This lot is comfortably into 7 and possibly 8 figures now when added up and , perhaps, the reason I have been looking back today was (and you read it here first) today I ceased to be the owner of this lady. A hard and upsetting day

Thanks CedB, sometimes we have to make it easy for ourselves... I saw the 'hole' on the sheet and thought... recycle! @ArmouredSprue: thank you very much for following this thread! 221. The lower wings are fixed, glued with Gator Glue (which, as I've explained before, is totally different from Gator's Grip glue, often wrongly referred to as Gator Glue). 222. After 45 minutes of drying time I started sanding the fuselage. 223. The gaps near the wing roots and the wing parts are filled with thick CA + accelerator, thereafter filed. 224. CA glue in this spot may look risky... 225. ... but is smooth within short time. The clue is to first use the file, then sanding paper coarse, then sanding paper medium. 226. Layer of silver, after which deficiencies still appear present. Those get CA again (see picture hereunder). File and sand again, CA again, then it's flat. 227. Quite a bit of work, but the result is satisfactory. Port side (picture: right area) is finished. Compare left with right. 228. Don't forget to sand off the silver afterwards... Total spent time: 85 hours.

Its getting there. Main camo pattern done. Needs some touch ups and the underneath to get another coat of light grey. Then to make it all very shiney for the decals.

Hello everyone , I present my latest work : Spitfire MK.IXc belonging to145 SQUADRON RAF on the Tunisian Goubrine airbase during April 1943 , piloted from Ace Polish Stanislaw Skalski . The kit is Tamiya 60319 , " seasoned" with aftermarket various resins Barracuda cast for tires and various parts of the cabin , and Eduard photoetched. The coloring was done by free hand with acrylics Xtracrylics , as my habit I tried to minimize the use of decals , replacing them , where possible , with masking . For the weathering I tried different filters of the True Earth. Here are the pictures:

Good day to all once again, I have one of my sparse updates for all you followers out there. I am struggling to find time to model at the moment. With my son being the next Manuel Neuer, it has been constant footy, footy and more footy! Provincial training (county level) this weekend so will have to get it whilst I can. I did have a day off from footy on Monday but went to see Billy Connolly as he made the effort to visit us over here. I must say he was on form and made me and my wife cry with laughter but boy is he getting on now, it was quite sad to see how old he is getting and although he is not as animated he is still hugely funny, if you ever think you have run over a cat, always check the wheel well first! But you had to be there lol! But anyhoo we are not getting any younger so it was back to the cave to try and sqeeze in some work. The Fury was primed and then it was a coat of Tamiya grey out of a spray can and then some extra dark sea grey (AKA Model Master RLM 72) and below is the result. Not too bad. I know some Canadian Furies were EDSG/Sky but I opted for a EDSG/grey version as something slightly different. This was then glossed and readied for decaling and demonstrating the dury undercarriage arrangement for that spraying And then it was onto the decaling using set X48061from Xtradecal. They are nice and bright, went down well and reacted well with micro sol ........ .............................. ........................... or so I thought, until on closer inspection............... Not sure what went on here! The both the upper wing decals have wrinkled. I'm not sure if it is down the the EDSG (not had problems before) or because I sol'd them and had the aircraft resting upside down to dry. So if there is anyone out there with some spare Canadian roundals from the above set please do let me know! I looked at the kit decals but they aren't as crisp, colourful or the same size! So I have left that there to ponder over the next week or so whilst I do some undercarriage work. The kit doors have been thinned down a bit and the main doors have a touch of extra detailing going on in the inside, but apart from that I have left it alone. The undercarriage has been painted and is currently being muddied up a bit, more to follow very soon on that. Next up is the spinner and prop. This aircraft has a star shaped paint job on the spinner, you do get kit decals to fit but they aren't very good at all. So I have been looking at the most difficult way possible to achieve that effect and I think I am there. I will share more details next time! Also on the way from a very generous fellow BMer is a set of tanks and a spare canopy so hopefully they should be steaming past Iceland as we speak! That's all for this week Cheers now Bob

thanks Ian! this week I got the 11-member carrier deck crew delivered, in 4 different scales. the largest is printed in Nylon, the rest in transparent resin. The detailing of the figure in 1:144 is the same as the one in 1:32! I modelled them with a piece of tube on 1 of the shoes so that they are easier to paint. This will be a big convenience since each figure is just 12 mm's tall! the next step is to clean them in IPA and to give them a basecoat of paint. This will also make the details stand out more than when looking at the transparent resin. I now also have the tie downs for the elevator deck so I can finish the glueing work on the deck section soon and start scribing the catapult and other features.

You see Ced, that's the problem with Enzo he drags you down dark alleys into the mysterious world of the MULTI-BUILDER.

You're not wrong there!Realised this morning that I had forgotten to add the gunner's seat at rear of the cockpit. I managed to snap off one of the legs from gunner's seat, but stuck it in anyway as it's barely visible with the lid off, let alone with the fairly thick Revell canopy on. I'm fairly satisfied with the pit, as it now looks suitably busy and crowded just like the real thing, particularly when viewed from the front. I'm not going to fit the front canopy piece until late in the build, as it will allow me access to the interior just in case I drop it again! This was the side glazing after a coat of MrSurfacer, overall the shims have worked pretty well in sorting out the fit. Here it is with the lid on, all glued in place and the edges of the canopy faired in with MrSurfacer 1000. Unlike the side glazing the canopy fits like a glove, and just needs a little blending. Here's the underside, with the side glazing cleaned up, and the small bulge for the bomb sight added. Just need to clean up the MrSurfacer around the edges of the canopy, clean the airframe up, and then it's into the paint shop for a squirt of primer. Karl

Please fee free to keep talking guitar and yes a guitar thread I was gonna start. I will reply properly later or tommoro as the gig is today in the mean time I think Stirlings and Guitars get along fine. Ive opened up one window and it's a bit of a pig to do to be honest. I thought Melvyn's name was familiar too ! Im with the general love Floyds though my preference is for the original Edge and Lo-Pro Edge trems produced by Ibanez. One guitar I would dearly love to get my hands on is the original Kramer Nightswan Guitar as used by whitesnake it's an incredible bit of kit with a spotty paintjob but they seem to be so rare despite 1000s being produced. I will reply later but I am reading thread drift don't bother me im used to it my mind has thread drift all the time ! I love the Bogner Amps I always fancied one of the Ecstacy amps I can't afford one though. However I love my two amps Carvin bel air and Laney Ironheart. Most the time for doing my own solo stuff I use a rack with a Line6 pod pro and eventide ultra Harmonizer dsp400. And some other stuff. Audio gear is great fun too. Rob

Just to show I'm actually doing something on this build, this is where I'm up to: You can see in the radome area how gappy this kit has been for me! There's a bit more tidying up to do, some more filling and PE etc. to do before the primer goes on. It's definitely worth the work though, it's a beautiful aircraft once it's all put together.

I still have nightmares about the Mach 2 Valiant and DC-4!! however, for an Argosy.............................................!!!!! Prozac and a bottle of Isle of Jura 10 year old malt on standby! Allan

Hannants have updated the links with the price plus the usual pre-order 10% off offer. So the RRP appears to be £45, although that price may be less at the show. To me I class that as affordable for a limited run injection kit of that size of a subject unlikely to be covered by a mainstream supplier and half the price of a resin equivalent, so I'll still be buying one if not two as some interesting projects now possible using this as a base kit.

My guess.. 1/72 metal wing Hurricane and 1/48 Spitfire Vc. Low key announcements but eagerly awaited. Cheers.. Dave

I prefer not to have any crass competitions between AMK and any other manufacturer. The truth is that we want to concentrate on our products. To worry about other manufacturers just detracts from this and risks our own product, something we are not willing to take chances with. In point of fact, AMK has already made announcements and the pattern is full.... Hence the Facebook announcement today (Part 1). Part 2 will follow soon. I will say this however. We prefer to take the moral high ground here and we will not make any comment about other companies' business decisions. In fact, we at AMK had already made our plans known to the modelers we care so much for earlier in the year. If other manufacturers wish to try and usurp us and bring out their own rendition or version of a kit then that is purely a matter for them and is, of course, at their own risk. Modelers will always choose which kit to buy from their own perception of quality vs price, detail, tooling, ease of build, options and from independent reviews. What I will also say is that AMK will always strive to make the details, engineering and shape as accurate as possible for you. Quality control is, and will remain, a top priority. If that means postponing a release to make sure that quality is on par with that expected of us then so be it, we will do just that. Take that as you will but another announcement on 2016 releases is incoming soon. I will let you in on a secret. No one and I mean no one will have the unrestricted access we have to the aircraft I am talking about. I know that for fact!