Fuad Posted February 15, 2018 Share Posted February 15, 2018 Hi, everybody! This time I present you the model of an ordinary airplane. I used additional etched set from Eduard, propeller from Quickbust and vacuum formed canopy from Rob Taurus. I made the antennas macht from copper bar, replaced all shock absorber plastic rods on metal rods, added navigation lights, made new Pitot tube, rolled riveting and etc. 30 1 Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted February 15, 2018 Share Posted February 15, 2018 Nice looking Lavochkin 👍 Link to comment Share on other sites More sharing options...
zebra Posted February 15, 2018 Share Posted February 15, 2018 Lovely model. And tiny, unless those are huge paint jars! Link to comment Share on other sites More sharing options...
Learstang Posted February 15, 2018 Share Posted February 15, 2018 (edited) Beautiful job on Maj. Ahmet-Khan's La-7, Fuad! That's one I intend on building, along with his Kobra. Zebra, it was a fairly small aeroplane - the Soviets liked their fighters small and manoeuvrable. Regards, Jason Edited February 16, 2018 by Learstang Additional comment added. 1 Link to comment Share on other sites More sharing options...
RidgeRunner Posted February 15, 2018 Share Posted February 15, 2018 Another beauty, Fuad Martin Link to comment Share on other sites More sharing options...
72modeler Posted February 16, 2018 Share Posted February 16, 2018 Ho, hum- your usual outstanding work, Fuad! Was the Quickboost prop that much better than the Eduard one? I think SBS also made a prop and spinner for this kit, so I'm guessing the Eduard parts aren't that good? I have the kit, but haven't looked at it for a while. Mike Link to comment Share on other sites More sharing options...
Les Moore Posted February 16, 2018 Share Posted February 16, 2018 Yet another truly superb model from Faud. Amazing. Link to comment Share on other sites More sharing options...
Fuad Posted February 16, 2018 Author Share Posted February 16, 2018 (edited) 29 minutes ago, 72modeler said: Was the Quickboost prop that much better than the Eduard one? I think SBS also made a prop and spinner for this kit, so I'm guessing the Eduard parts aren't that good? I have the kit, but haven't looked at it for a while. Mike "Eduard" has the wrong propeller spinner. Certainly it can be just cut, but it's easier to buy the right one. Also, "Eduard" has problems with the canopy bubble - it does not match in size. So I replaced it, too. I also made from toothbrush bristle the indicate pins of the released chassis on the wing. Also, the fuselage of "Eduard" has a wrong hump below the radiator. It also had to be worn off. Edited February 16, 2018 by Fuad Link to comment Share on other sites More sharing options...
Vinnie Posted February 16, 2018 Share Posted February 16, 2018 Nicely done Fuad. Coincidentally, that is the kit I have on my bench at the moment. I'd even decided to do the same scheme as you. As this will be my first attempt with an airbrush, I doubt it will be appearing in RFI. Link to comment Share on other sites More sharing options...
Fuad Posted February 16, 2018 Author Share Posted February 16, 2018 (edited) 7 minutes ago, Vinnie said: Nicely done Fuad. Coincidentally, that is the kit I have on my bench at the moment. I'd even decided to do the same scheme as you. As this will be my first attempt with an airbrush, I doubt it will be appearing in RFI. Feel free to exhibit here and only then you will receive valuable recommendations from colleagues. The "britmodeller" may be the most kind model resource in the world. The gentlemen gathered here))). Good luck in the construction! Edited February 16, 2018 by Fuad 2 Link to comment Share on other sites More sharing options...
ModellerCH Posted February 16, 2018 Share Posted February 16, 2018 Impressive. Love the exhaust smoke effect! Link to comment Share on other sites More sharing options...
stevehnz Posted February 16, 2018 Share Posted February 16, 2018 That is quite wonderful Fuad, superbly completed. I thank you for the tips you have given for finishing this kit, like many, I also have one. Steve. Link to comment Share on other sites More sharing options...
72modeler Posted February 16, 2018 Share Posted February 16, 2018 9 hours ago, Fuad said: "Eduard" has the wrong propeller spinner. Certainly it can be just cut, but it's easier to buy the right one. Also, "Eduard" has problems with the canopy bubble - it does not match in size. So I replaced it, too. I also made from toothbrush bristle the indicate pins of the released chassis on the wing. Also, the fuselage of "Eduard" has a wrong hump below the radiator. It also had to be worn off. Thanks! I knew about the prop and spinner and had already bought them from SBS; I will get the Rob Taurus canopy- I think they are the best vacform canopies, as they are thick enough to glue on and fair in, but yet are still not nearly as thick as most injected ones. I will definitely check out the area below the radiator- I think I have some good scale drawings and photos, plus the Red Star monograph on La fighters. Keep 'em coming, Fuad- I always enjoy seeing your work. Mike Link to comment Share on other sites More sharing options...
James G Posted February 16, 2018 Share Posted February 16, 2018 Great work Fuad! Link to comment Share on other sites More sharing options...
Fuad Posted February 16, 2018 Author Share Posted February 16, 2018 4 hours ago, 72modeler said: Thanks! I knew about the prop and spinner and had already bought them from SBS; I will get the Rob Taurus canopy- I think they are the best vacform canopies, as they are thick enough to glue on and fair in, but yet are still not nearly as thick as most injected ones. I will definitely check out the area below the radiator- I think I have some good scale drawings and photos, plus the Red Star monograph on La fighters. Keep 'em coming, Fuad- I always enjoy seeing your work. Mike I recommend that you watch the photos of real boards of La-7. Because the drawings are not very true. On some of them there is a hump and there is an incorrect prop spinner, to which the manufacturer was apparently based. 1 Link to comment Share on other sites More sharing options...
corsaircorp Posted February 16, 2018 Share Posted February 16, 2018 Hello Fuad, What a little beauty ! Congratulations ! Nice adds to the kit ! Sincerely ! Corsaircorp Link to comment Share on other sites More sharing options...
Learstang Posted February 16, 2018 Share Posted February 16, 2018 5 hours ago, 72modeler said: Thanks! I knew about the prop and spinner and had already bought them from SBS; I will get the Rob Taurus canopy- I think they are the best vacform canopies, as they are thick enough to glue on and fair in, but yet are still not nearly as thick as most injected ones. I will definitely check out the area below the radiator- I think I have some good scale drawings and photos, plus the Red Star monograph on La fighters. Keep 'em coming, Fuad- I always enjoy seeing your work. Mike As another resource, there was a reasonably good book written by a chap not far from you - in Seguin, Texas, no less. The book is called Lavochkin Fighters of the Second World War. It doesn't have scale drawings, but it does have some nice photographs and colour profiles. I should know - I wrote it. Best Regards, Jason 3 Link to comment Share on other sites More sharing options...
Fuad Posted February 17, 2018 Author Share Posted February 17, 2018 9 hours ago, Learstang said: As another resource, there was a reasonably good book written by a chap not far from you - in Seguin, Texas, no less. The book is called Lavochkin Fighters of the Second World War. It doesn't have scale drawings, but it does have some nice photographs and colour profiles. I should know - I wrote it. Best Regards, Jason You are well done! I am proud that my model is like the American author of books on Soviet aviation. It's really amazing! 1 Link to comment Share on other sites More sharing options...
Fuad Posted February 17, 2018 Author Share Posted February 17, 2018 On 16.02.2018 at 1:06 AM, Learstang said: Beautiful job on Maj. Ahmet-Khan's La-7, Fuad! That's one I intend on building, along with his Kobra. Zebra, it was a fairly small aeroplane - the Soviets liked their fighters small and manoeuvrable. Regards, Jason Akhmetkhan's mother was a Tatar; she is Turkic blood, like me. His father was national - Lakets. These people number only 160 000. They live in Dagestan, the Caucasus Mountains. Ahmethan Sultan was almost my countryman, so I'm proud of him. 1 Link to comment Share on other sites More sharing options...
Learstang Posted February 17, 2018 Share Posted February 17, 2018 You do brilliant work on all your models, Fuad, but I'm especially attracted to the Soviet GPW models, given that it's my area of historical interest (and knowledge). If I'm not mistaken, you've already built an Il-2, now this Lavochkin. Now all you need to do is a Tu-2 (if you haven't already), which I also wrote a book about (Tupolev Tu-2: The Forgotten Medium Bomber). Best Regards, Jason 1 Link to comment Share on other sites More sharing options...
Fuad Posted February 17, 2018 Author Share Posted February 17, 2018 (edited) 5 minutes ago, Learstang said: You do brilliant work on all your models, Fuad, but I'm especially attracted to the Soviet GPW models, given that it's my area of historical interest (and knowledge). If I'm not mistaken, you've already built an Il-2, now this Lavochkin. Now all you need to do is a Tu-2 (if you haven't already), which I also wrote a book about (Tupolev Tu-2: The Forgotten Medium Bomber). Best Regards, Jason Oh, yes, I have a Tu-2 model from the Ukrainian ICM. But this is a very intricate model for the assembly. I still hold it until the moment when I feel the strength to take it. Edited February 17, 2018 by Fuad 1 Link to comment Share on other sites More sharing options...
Learstang Posted February 17, 2018 Share Posted February 17, 2018 1 minute ago, Fuad said: Akhmetkhan's mother was a Tatar; she is Turkic blood, like me. His father was national - Lakets. These people number only 160 000. They live in Dagestan, the Caucasus Mountains. Ahmethan Sultan was almost my countryman, so I'm proud of him. Yes, I know the sad story of his mother's people, the Crimean Tartars; because he was a HSU, his immediate family was exempt from Stalin's deportation, but many of his friends were not so lucky. I find him interesting (although I didn't realise that he was part 'Dagestani'), that's why I want to do both his Kobra (nearly finished) and La-7 (partially finished). Although people always talk about the 'Russians' regarding the Great Patriotic War, they seem to forget all the non-ethnic Russians who also fought against Fascism, including the Soviet ace of aces, Ivan Nikitovich Kozhedub, who was a Ukrainian (flying aeroplanes, the La-5 and La-7, designed by a Jew, Semyon Alekseyevich Lavochkin). Best Regards, Jason 1 Link to comment Share on other sites More sharing options...
Learstang Posted February 17, 2018 Share Posted February 17, 2018 1 minute ago, Fuad said: Oh, yes, I have a Tu-2 model from the Ukrainian ICM. But this is a very intricate model for the assembly. I still hold it until the moment when I feel the strength to take it. I have the Hobby Boss Easy Assembly kit, which seems to be accurate in overall dimensions and outline, but it is definitely lacking in interior detail. I've detailed mine with parts from the ICM kit (too complicated for me). Like so many of my kits, it's nearly completed, but I can't bring myself to do all the intricate masking for the clear parts. Regards, Jason Link to comment Share on other sites More sharing options...
Fuad Posted February 17, 2018 Author Share Posted February 17, 2018 (edited) 46 minutes ago, Learstang said: Although people always talk about the 'Russians' regarding the Great Patriotic War, they seem to forget all the non-ethnic Russians who also fought against Fascism, including the Soviet ace of aces, Ivan Nikitovich Kozhedub, who was a Ukrainian (flying aeroplanes, the La-5 and La-7, designed by a Jew, Semyon Alekseyevich Lavochkin). Azerbaijan at the beginning of the Great Patriotic War had 3.4 million people. 600,000 of these were drafted into the soviet army. More than 300,000 from 600,000 young and healthy Azerbaijanis were killed in this war. But the current head of the Russian claims that Russian could win without other nationalities.( Edited February 17, 2018 by Fuad 1 Link to comment Share on other sites More sharing options...
Learstang Posted February 17, 2018 Share Posted February 17, 2018 That's something I try to make clear in my books; it was the Soviet Union, not 'Russia', which fought the Nazis and their fascist allies, and it was the Soviet people, not the 'Russians' who fought the Axis. 1.5 million Ukrainian soldiers died fighting the Nazis, and most of the civilian casualties occurred in the Byelorussian and Ukrainian Republics. The ethnic Russians did provide most of the soldiers in the Red Army and certainly the officer corps was mainly Russian, and their sacrifices should never be forgotten, but they did have help from the non-Russians in the Soviet Union. Regards, Jason 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now