06/24 Posted January 12, 2018 Share Posted January 12, 2018 15 minutes ago, CedB said: thanks for the pointer to ModelU over in the Boultbee thread. I've looked them up and it's interesting... £25 for the scan and £3 for figures? Sounds like a good idea to me - you know how keen I am on crewing my models and being able to get a 'right sized' decent pilot figure... I have emailed them and they're in Bristol on the 28th. More later! For best effect, hire a costume - the scans will pick up every detail, so helmet, dangling mask etc... I saw some larger scale stuff Alan of Modellu had done of some re-enactors and it was uncanny! 2 Link to comment Share on other sites More sharing options...
Hamden Posted January 12, 2018 Share Posted January 12, 2018 Nice start mind if I squeeze in by the bar? Roger 1 Link to comment Share on other sites More sharing options...
keefr22 Posted January 12, 2018 Share Posted January 12, 2018 Drat, those e-mail notifications going AWOL again mean I'm half a day late, so I guess I'll just have to stand over here by the door then.... 1 hour ago, 06/24 said: I saw some larger scale stuff Alan of Modellu had done of some re-enactors and it was uncanny! That's the major problem with some of the Modelu figures - some of the re-enactors being of a somewhat 'larger scale' (around the waste at least!) than the originals they are meant to be portraying! He started off doing railway figures and a portly engine driver doesn't look quite so out of place - don't think I'd now scan well as a 20 year old Battle of Britain pilot, for instance....!! Keith 4 Link to comment Share on other sites More sharing options...
Spookytooth Posted January 12, 2018 Share Posted January 12, 2018 Oh well, I will join Keef at the door I suppose. But I did bring some refreshments though. I am ready for another one of your wonderful builds Ced. Simon. 2 Link to comment Share on other sites More sharing options...
perdu Posted January 12, 2018 Share Posted January 12, 2018 Did you bring the pork pies Simon? 1 Link to comment Share on other sites More sharing options...
Spookytooth Posted January 12, 2018 Share Posted January 12, 2018 1 minute ago, perdu said: Did you bring the pork pies Simon? I did Perdu , along with mustard or pickle. Sausage rolls, nut, crisps and twiglets too. + 4 pints of milk, with tea/coffee. Biscuits. Set for the duration LOL. Simon. 2 1 Link to comment Share on other sites More sharing options...
perdu Posted January 12, 2018 Share Posted January 12, 2018 Rich Tea or Arrowroot? Link to comment Share on other sites More sharing options...
Spookytooth Posted January 12, 2018 Share Posted January 12, 2018 Rich Tea + ginger Nuts and Bourbons. They had run out of Custard Creams. Sorry everyone. Simon. 2 Link to comment Share on other sites More sharing options...
John Masters Posted January 12, 2018 Share Posted January 12, 2018 I thunk I'll have to start the Harvard after the Chipmunk...then jump into the 10th Anni GB... 1 Link to comment Share on other sites More sharing options...
Biggles87 Posted January 12, 2018 Share Posted January 12, 2018 Stoppit with all this talk about food! I'm trying to loose weight. 4 Link to comment Share on other sites More sharing options...
06/24 Posted January 12, 2018 Share Posted January 12, 2018 Untitled by jongwinnett, on Flickr 4 2 Link to comment Share on other sites More sharing options...
perdu Posted January 12, 2018 Share Posted January 12, 2018 Ah yes, there they are Yummy No Arrowroot? Link to comment Share on other sites More sharing options...
CedB Posted January 12, 2018 Author Share Posted January 12, 2018 5 hours ago, giemme said: Looks like a Yak 3 to me ... Ciao Thanks Giorgio - my recognition skills are a bit limited 5 hours ago, 06/24 said: For best effect, hire a costume - the scans will pick up every detail, so helmet, dangling mask etc... I saw some larger scale stuff Alan of Modellu had done of some re-enactors and it was uncanny! Good idea Jon! I've had a quick search and there are some cheap fancy dress costumes available if I can't rent 'the real thing'. This one might 'scan' OK. Hmmm... 4 hours ago, keefr22 said: Drat, those e-mail notifications going AWOL again mean I'm half a day late, so I guess I'll just have to stand over here by the door then.... That's the major problem with some of the Modelu figures - some of the re-enactors being of a somewhat 'larger scale' (around the waste at least!) than the originals they are meant to be portraying! He started off doing railway figures and a portly engine driver doesn't look quite so out of place - don't think I'd now scan well as a 20 year old Battle of Britain pilot, for instance....!! Keith Thanks Keith and welcome Good point... I wonder if they can 'edit out' the, er, 'tummy'? 2 hours ago, Spookytooth said: Oh well, I will join Keef at the door I suppose. But I did bring some refreshments though. I am ready for another one of your wonderful builds Ced. Simon. Welcome Simon Enough with the snacks though - I may need to lose some weight to get into the costume 48 minutes ago, perdu said: Did you bring the pork pies Simon? Stop it! 5 minutes ago, Biggles87 said: Stoppit with all this talk about food! I'm trying to loose weight. Thanks John - although I may sneak one of those custard creams... 30 minutes ago, John D.C. Masters said: I thunk I'll have to start the Harvard after the Chipmunk...then jump into the 10th Anni GB... Good idea John, although I said I'd stay away from GBs for a while - can't take the pressure! Look what I found in the Airfix kit: Airfix II exhaust by Ced Bufton, on Flickr Should be a good start - I couldn't work out how to get the 'open lip' at the end with tube. 7 Link to comment Share on other sites More sharing options...
perdu Posted January 12, 2018 Share Posted January 12, 2018 Easy slice off nobby bit - drill thin hole - insert Albion Alloys tube But not that suit Ced, looks like a hybrid USAF Bombing chap's gear to me You want https://tinyurl.com/yacr6twj 1 2 Link to comment Share on other sites More sharing options...
bbudde Posted January 12, 2018 Share Posted January 12, 2018 (edited) 10 hours ago, Beard said: The damn thing flew over my house about a hundred times that day. Sadly, this didn't: As above, looks like a Yak 3 and as noisy as a Mustang I guess ( saw one at the FMO on a Flying Legend show there). But if you lived in NRW in the 70/80, you really have experienced, what planes could wreck your nerves on sunny afternoons. My favourite is this at low level test raids on lakes of the Sauerland then: Not forgetting supersonic bangs mostly everyday by other Mach 1+ ones. Mainly F-4/15/16 were the ones killing your well deserved nap after school. Edit: Correcting my typing. Edited January 12, 2018 by bbudde 5 Link to comment Share on other sites More sharing options...
06/24 Posted January 12, 2018 Share Posted January 12, 2018 And cutting the tube at angle gives the opening... 2 Link to comment Share on other sites More sharing options...
Brandy Posted January 12, 2018 Share Posted January 12, 2018 What?? Late again? Sorry! I'll join Bill and co at the bar. A pint and a sausage roll sounds good right now! Carry on! Ian 2 Link to comment Share on other sites More sharing options...
TheBaron Posted January 12, 2018 Share Posted January 12, 2018 Cripes - came in to empty the bins and found some sort of lock-in in progress. Lovely backstory for an engaging subject Ced. We moan about the younger generation but when you see this much enthusiasm for an aircraft, well, it's rather humbling: 9 Link to comment Share on other sites More sharing options...
CedB Posted January 13, 2018 Author Share Posted January 13, 2018 17 hours ago, perdu said: Easy slice off nobby bit - drill thin hole - insert Albion Alloys tube But not that suit Ced, looks like a hybrid USAF Bombing chap's gear to me You want https://tinyurl.com/yacr6twj 16 hours ago, 06/24 said: And cutting the tube at angle gives the opening... Thanks Bill and Jon - neat! As usual, I'm probably overthinking this... the actual exhaust has a pipe running parallel to the fuselage and the big pipe bends around it at the 'open end': Exhaust 1 by Ced Bufton, on Flickr I must stop zooming in to stuff and get some perspective! I think I might either go for your suggestions or make some copies of the (cleaned up) Airfix part and have a play. Maybe. Bill you've made me think about the 'body scan' too. I'm waiting to hear from the guys after I emailed some queries but getting hold of some chubby, bearded, big-nosed pilots is becoming less attractive the more I think about it. I wonder if they can 'airbrush' the scan? Certainly I need some decent costume (thanks for the link Bill) but where can I hire a Mae West??!! 17 hours ago, bbudde said: As above, looks like a Yak 3 and as noisy as a Mustang I guess ( saw one at the FMO on a Flying Legend show there). But if you lived in NRW in the 70/80, you really have experienced, what planes could wreck your nerves on sunny afternoons. My favourite is this at low level test raids on lakes of the Sauerland then: Thanks Benedikt Ooh, a Warthog! I like those... mainly after seeing a pair fly across the road in front of me some years ago. They went across the field at 'not very high' and the lower one, when he came to a line of trees, rather than gain height just flipped on his side so that the wing went between the trees. Those guys are nuts very skilled pilots! 16 hours ago, limeypilot said: What?? Late again? Sorry! I'll join Bill and co at the bar. A pint and a sausage roll sounds good right now! Carry on! Ian Welcome Ian - sausage rolls? Yum... Thanks Tony - Harvard fans eh? They come in all shapes and sizes... and some of them are girls! My 'Mr Decal Paper' white Inkjet stuff has arrived so I might play with the 'Wabbit' images some more so that's out of the way. Internal bits have been de-sprued and dry fitted and I've translated the colours on the French Heller instructions - quoi? Mais oui, je parle le Francais un peu. No, not like that, actually. I used a paint conversion chart on the Heller codes and... well, I think I get to use my Vallejo 'not RAF' Interior Green. Also, my 'got from Amy Johnson's Jason Brunswick green' experience comes into play with the seats. Probably. Crew selection also required as they need painting and that takes a while. Given that a scan on the 28th and four-to-six weeks printing delay might make ModelU too late. 4 Link to comment Share on other sites More sharing options...
CedB Posted January 13, 2018 Author Share Posted January 13, 2018 I've had a mini-revelation this morning; I need to stop worrying about finishing the model and enjoy each of the steps, relaxing over the work. Better late than never eh? Copying a decent(ish) exhaust then. Out with my old Dad's lino-engraving tools: Yes, I have lots of other scribers and things, but nostalgia sometimes wins Cut a slot with a #10a and blobbed with a black felt tip so that I can see what I'm cutting: Gouge, cut, trim, sand and I have a hole: Out with the quick-setting two-part silicon molding stuff my daughter uses for ear molds: I know I need to leave that to go off and maybe apply some release agent otherwise the next lot will stick to it. See, I do learn. Sometimes. 10 Link to comment Share on other sites More sharing options...
Whofan Posted January 13, 2018 Share Posted January 13, 2018 On 12/01/2018 at 6:25 AM, Biggles87 said: Just managed to squeeze in at the back, bit of a crush in here. So, formatting on a Spitfire in a Havard! I doubt I'll be able to match that unless SWMBO has another surprise for me. John " SWIMBO has another surprise for me " ...... In my experience that could be .... I've bought some wallpaper for the lounge ...... .... I think the diet you're going on will be good for you ...... but it would be nice if it was " here's the itinerary for your flight in a (aerolpane of your choice) ... !! Hi Ced, breakneck speed again, I'm guessing tuesday in the RFI? 4 Link to comment Share on other sites More sharing options...
Whofan Posted January 13, 2018 Share Posted January 13, 2018 2 hours ago, CedB said: Bill you've made me think about the 'body scan' too. I'm waiting to hear from the guys after I emailed some queries but getting hold of some chubby, bearded, big-nosed pilots is becoming less attractive the more I think about it. I wonder if they can 'airbrush' the scan? Certainly I need some decent costume (thanks for the link Bill) but where can I hire a Mae West??!! here should be ok http://www.celebrityimpersonators.com/cp/maewest.html 6 Link to comment Share on other sites More sharing options...
06/24 Posted January 13, 2018 Share Posted January 13, 2018 Ok, I’m confused (again). Ced, you have made a decent exhaust out of the kit part. Why then are you moulding another? My brain hurts. 2 1 Link to comment Share on other sites More sharing options...
perdu Posted January 13, 2018 Share Posted January 13, 2018 Its an awfully good question Ced 1 Link to comment Share on other sites More sharing options...
CedB Posted January 13, 2018 Author Share Posted January 13, 2018 Thanks John - I have the same problem with Mrs B; she's started the year with a list of 'things we can do around the house together'. Are your thoughts in the right zone? Correct. All DIY, no re-enactments of 'those days'. Ho hum. Now, where's that picture of Mae West... Hi Jon (and Bill). Sorry, should have been clearer. Fat exhaust is from the Airfix kit. If I mould another I still have a chance of building that too. If I sort out the canopies too. More doings. It's been some time since I molded but I did remember that getting the flow and avoiding bubbles is key. I'll try the 'pre-load some and then force it through' method so I made some flow points: I'll leave that here for a while so that people can shout if it's not going to work. Two equal portions on the bench: Release agent applied, left to dry and then the top squidged on making sure to fill the hole first (I hope). First coat of 'Light Brunswick Green' applied to the seats and other bits sprayed: Lunchtime! 13 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now