BIG X Posted October 5, 2017 Share Posted October 5, 2017 I know this is no comfort Tony - but compared to my skill set these still look good to me - so don't despair - deep breaths and counting to 10 may still save the day 1 1 Link to comment Share on other sites More sharing options...
Darby Posted October 5, 2017 Share Posted October 5, 2017 If it's any consolation I had paint woes with enamels. Tried a different thinner and didn't go well. Resprayed it and all seemed well until dirty great paint creep 'neath the masking. Resprayed that and ready for decals but that blue and white tail band was a sod. It broke, and so did the model. Never in a long time has such a series of woes befell such a simple kit. My Classic Airframes Seahawk I'm on with at the moment is going great guns (touch wood).Who'd have thought it? 1 Link to comment Share on other sites More sharing options...
SimonT Posted October 5, 2017 Share Posted October 5, 2017 It’s not horrendous mate, I know you put a lot of effort in but don’t let it beat you. All you need is a tarp on the wing and a figure with an airbrush in his hands. Seriously though, some of us can only aspire to your mistake level... it’s all good really! 3 1 Link to comment Share on other sites More sharing options...
AdrianMF Posted October 5, 2017 Share Posted October 5, 2017 Er - it looks fine to me! Benefits of being a brush painter, I guess. I'd say nowt and blame it on late war shortages... Nice build up to and including your paint woes! Regards, Adrian 2 1 Link to comment Share on other sites More sharing options...
Nigel Heath Posted October 5, 2017 Share Posted October 5, 2017 As others have said, it's not as bad as your description. I think some sanding with a fine sanding stick and maybe another coat of Aqua Gloss will sort it out. 1 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted October 5, 2017 Author Share Posted October 5, 2017 Cheers lads made me feel like a right drama queen Sorry for moaning... Anyways whilst I decide what to do about the varnish situation I did a bit of weathering, trying out something new (for me anyways) so if it goes wrong (sorry) then no biggie. So these are water based acrylic washes, having used enamel/oils for the past 5 years this is alien. I bought these two a while back but not got around to using them yet (scared?) I bought a dark grey and dark brown, two colours which should prove versatile and/or generic enough for most applications and if I like them can get more shades... They are surprisingly thick out of the bottle, (compared to enamel panel liners say) and don’t flow nicely untill thinned with a touch of water. For the bays I brushed it over the whole area, then using a fine brush drew and swiped it away from the flat areas as it was drying to avoid tide marks. Strange working in small sections at a time with this as opposed to oil washes where you can do the whole model inside and out then go back at your leisure and blend it in. Guess its all down to the drying times. On the exterior I only used the washes here and there to bring out certain filler ports and bolts etc, as the main panel lines are prominent enough, apart from the undersides of the tail planes which are surprisingly shallow, and in the exhaust flow, so these were darkened. Another area I used the dark grey was along all the hinge lines of the control surfaces top and bottom, as they were quite wide and showed alot of green in them. The dark brown was used on the U/C legs, with the dark grey on the oleos. A few pics to expand on all that waffle: U/C bits. Bays. Control surface hinge lines along topside of wing: Thanks for looking. Ps got an idea to fix the finish, will try out later/tomorrow and go old school with some alclad enamel clear coats 👍🏿 18 Link to comment Share on other sites More sharing options...
Booty003 Posted October 6, 2017 Share Posted October 6, 2017 Great work, skill and recovery there Tony. It does feel like a proper kick in the nuts when what can be considered the easiest part of the build goes wrong!! Its those times when we need to take a step back, grab a cold one and look at it again with fresh eyes. Can't wait to see the final reveal of this lovely little jet. Phil 1 Link to comment Share on other sites More sharing options...
JPuente54 Posted October 6, 2017 Share Posted October 6, 2017 Tony, there was a poster published a long time ago called: "Murphy's Laws of Life". One of them is, of course, " If things can go wrong; they will." The other is: "If things are going well; you have obviously forgotten something!" However, as a couple of the guys above have stated; it is how you recover that is the important matter. I agree with AdrianMF, Nigel, and, booty about the build and, your recovery. You have done an excellent job so far. I liked the washes; quite good for a first time use of new product. Look forward to the next step. Joe 1 1 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted October 6, 2017 Author Share Posted October 6, 2017 So while I was doing the weathering with those washes, the plane was growing on me again and I was trying to think how to smooth out the finish. As mentioned in previous post thats when I remembered I had enamel alclad clears in the drawer. These should smooth out better rather than have the risk of ‘tearing’ an acrylic varnish when sanding. So it had several dryish dusting type coats of flat, probably more to build up the surface. Ended up being quite rough and matt, sucking all the light in to help hide the flaws in the acrylic varnish underneath it. Plus it seemed there was enough material built up over those blisters and bubbles to allow some sanding too. Flat clear on, two angles. This below is the most sheen I could catch with the surface. Then it was out with the 4k micromesh, and it had a good sanding all over, ended up cutting right through on each side next to cockpit on some bad blisters. Overall looks quite windswept from the sanding. So then it was time to break out the colourcoats again and do some touch ups over the damage shown above. I got the RLM81 out too and did some spot repairs to hide some of the smaller blisters over that colour, and also to make it more brown as where I had ‘faded’ it a bit too much with some shading at the end of the main paintjob it had gone rather pink. Damage now touched in with my 0.2mm needle. So now it had a very inconsistent finish, which for a beat up old plane looked quite cool, with matt ‘streaked’ paint from the sanding of the varnish and the fresh satin touch ups. But seeing as its a late war plane and a small scale I wanted a more uniform finish. So it was out with the alclad semi-matt to level it all off and give it the slightest sheen to look like a metal surface. I think dead flat luftwaffe planes look boring. As it stands now in its semi matt coat. I’m back in love with it (gay!!!) Will leave it to cure (it’s probably got half a mm of enamel varnish on it!) for a few days in airing cupboard over the weekend for final assy early next week. Thanks for looking (and your patience!) 12 Link to comment Share on other sites More sharing options...
JPuente54 Posted October 6, 2017 Share Posted October 6, 2017 I no sooner posted; than you did! Nice uniform finish there, Tony. It should look good when it cures. Joe 1 Link to comment Share on other sites More sharing options...
Jamie @ Sovereign Hobbies Posted October 6, 2017 Share Posted October 6, 2017 That is a fantastic recovery Tony. Did this initial clearcoat of yours just go on lumpy, or did it react with my paint somehow? 1 Link to comment Share on other sites More sharing options...
Max Headroom Posted October 6, 2017 Share Posted October 6, 2017 That’s looking rather tasty. Sorry to hear of the woes with the varnishing so am glad that it’s now all sorted. As to the blisters near the cockpit after micromeshing I would have been tempted to ‘grot it up’ a bit with matt aluminium or the like to suggest a hard life. Good job Trevor 1 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted October 6, 2017 Author Share Posted October 6, 2017 3 hours ago, Jamie @ Sovereign Hobbies said: That is a fantastic recovery Tony. Did this initial clearcoat of yours just go on lumpy, or did it react with my paint somehow? No it wasn’t your paint at all Jamie mate, as once the enamel paintjob was done and cured she was coated in ak gauzy stuff as a pre decal gloss. Once the decals were done and I sealed them is where it went wrong. The mig satin varnish didn’t like the humidity/psi/temperature/colour underpants I had on or something that day because it dried all lumpy and pebbly. In a panic to recover it thats when I drowned it in aquagloss, which dissolved and crazed the not fully cured mig satin I guess. We live and learn! 2 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted October 6, 2017 Author Share Posted October 6, 2017 3 hours ago, Max Headroom said: That’s looking rather tasty. Sorry to hear of the woes with the varnishing so am glad that it’s now all sorted. As to the blisters near the cockpit after micromeshing I would have been tempted to ‘grot it up’ a bit with matt aluminium or the like to suggest a hard life. Good job Trevor Thanks pal, much appreciated! Chipping in 72nd scale isn’t really my cup of tea, but it may be for other folk. Doing scratches that we could see here in scale would be like flakes of paint that are hand size coming off. Perhaps on a japanese pacific plane but not on an end of days Reich machine that flew a few times if that. Each to his own 👍🏿 3 Link to comment Share on other sites More sharing options...
Nigel Heath Posted October 6, 2017 Share Posted October 6, 2017 That's looking splendid and well done on the recovery (told you it wasn't that bad). I will be watching what colour underpants I wear when I next have to apply varnish. Cheers, Nigel 3 Link to comment Share on other sites More sharing options...
stevehnz Posted October 6, 2017 Share Posted October 6, 2017 Great recovery Tony, that really looks good now. Steve. 1 Link to comment Share on other sites More sharing options...
Bigdave22014 Posted October 7, 2017 Share Posted October 7, 2017 Nicely done Sir! It's this sort of ability to turn a model around that defines a modeller. 4 1 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted October 7, 2017 Share Posted October 7, 2017 Nice to see the modelling gods have waved their ‘fix it’ wand over your 262. If I PM you my home address Tony, would you mind sending them my way... better tell ‘em to bring a bigger wand as well!! Cheers and well played.. Dave. 1 2 Link to comment Share on other sites More sharing options...
Gerrardandrews Posted October 7, 2017 Share Posted October 7, 2017 Really great save, you would think, in 2017, model makers, would have a go to varnish, that would be 100% every time😊 l 2 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted October 7, 2017 Author Share Posted October 7, 2017 1 hour ago, Gerrardandrews said: Really great save, you would think, in 2017, model makers, would have a go to varnish, that would be 100% every time😊 True that mate, and I do, but I am a sucker for trying out new products 1 Link to comment Share on other sites More sharing options...
stevehnz Posted October 7, 2017 Share Posted October 7, 2017 51 minutes ago, Tony Oliver said: True that mate, and I do, but I am a sucker for trying out new products Someone has to do it for the rest of us Tony, for which I'm truly greatful. Steve. 1 Link to comment Share on other sites More sharing options...
Andy Robbins Posted October 8, 2017 Share Posted October 8, 2017 MR Paint is the one I use- I’ve got the gloss, satin and matt. They are as thin as water and spray really well. I’ve not had any pebbling or anything horrible. I used to use the Tamiya ones, but their matt varnish always pebbled to a degree, and then one day wrecked an Eduard EV that I’d lovingly lozenged. I tried the Alclad ones, but I had some that never dried and stayed sticky. MR varnishes are acrylic lacquers but haven’t destroyed any base coats so far. They’re pretty bombproof once dry, as well. They aren’t kind to your lungs, mind. Link to comment Share on other sites More sharing options...
billn53 Posted October 8, 2017 Share Posted October 8, 2017 I really feel for you with your varnish problem, and it's great that you got it sorted out ok. I, also, recently had a bad experience with varnish. Here's the link to my post on the subject: http://www.britmodeller.com/forums/index.php?/topic/235022860-old-dog-new-tricks-part-deux-172-trumpeter-f-105d-thunderchief/&page=4 1 Link to comment Share on other sites More sharing options...
fewr9fkr9595 Posted October 11, 2017 Author Share Posted October 11, 2017 So the last few bits being done, order below a bit out of sequence but hopefully comes across ok. Should get around to take some pics for an RFI over the weekend. Edges of the cockpit touched in with dark grey. Not bothered about seam in rear bulkhead as won’t be seen with a closed canopy. Also superfabric belts had a brown wash to tone them down a touch because they were very bright. Consoles only really had a wash and some details picked out. Most of this won’t be seen anyways. Canopy fixed with gators grip. 0.3 mm hole drilled and uschi fine rigging in the rear glazing frame with the tiniest bit of CA. Also hole drilled through in fuselage for stretched black sprue. Just dropped in for now and will be trimmed and fixed to line later. Line across to fin top. At the tautness required to match thickness of sprue. Then the sprue lead in trimmed and attached. Its just dangling down into the fuselage hole. Not glued to avoid sagging/pulling the top line 👍🏿 Nav lights based in sliver. Then clear colours. Also @Darby used a pin to replace the snapped pitot you noticed. Just a butt join with CA so was filed across the end to key it for grip (plastic probe had a sanding stick across the end of it too) Then a smidge of ‘signs of use’ Pigments mainly. Cannons Some ground dirt in hubs, edges of wheel doors and some thrown up by the tires. Some general underside streaks too. Thanks for looking. Hopefully next post will be a link to its RFI! Cheers, Tony. 5 Link to comment Share on other sites More sharing options...
Winenut Posted October 11, 2017 Share Posted October 11, 2017 Top save and you addressed your concerns superbly! It's looking brilliant and I'm looking forward to the RFI Cheers Bruce 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now