Hunter Rose Posted June 28, 2017 Share Posted June 28, 2017 Yeah another one!!! Its a comission that finally got the go ahead this week and im saving for a holiday so needs must and all that. But its really cool to work with the proper kit after the two recasts, and this is being done as spiderman so no mods (and no filling web details!!!!! ) 20170627_130656 by Nick Frost, on Flickr 20170627_130810 by Nick Frost, on Flickr Flash has been removed and i cleaned up the bits as coffee had been spilt on them (not by me!) 20170627_131438 by Nick Frost, on Flickr You can see here the detail is pin sharp, chalk and cheese compared to the white repops. 20170627_131452 by Nick Frost, on Flickr 20170627_131515 by Nick Frost, on Flickr And after just holding some bits together the clouds parted and the modelling gods smiled because the fit looks really good so minimal filling work required. Now theres karma in action! 20170627_131559 by Nick Frost, on Flickr 20170627_131618 by Nick Frost, on Flickr 20170627_131655 by Nick Frost, on Flickr Not done much with it yet just wanted to kick off the wip, next I'll get the plaster in for weight and begin the pinning stage. Thanks for looking, more soon 5 Link to comment Share on other sites More sharing options...
S5 modeller Posted June 28, 2017 Share Posted June 28, 2017 Oh no! Not another one. Certainly shows up how bad the re pops are. Should fly together for you. Matt Link to comment Share on other sites More sharing options...
Gimme Shelter Posted June 30, 2017 Share Posted June 30, 2017 uh oh - looks like photobucket is spoiling our fun again 1 Link to comment Share on other sites More sharing options...
Hunter Rose Posted June 30, 2017 Author Share Posted June 30, 2017 OH !!!! Photobucket have changed their T&C's so that you can only do 3rd party sharing with a premium account that costs $400 a year!! So forget that. Sigh, I think for now I'm going to switch to another much better and FREE service and I'll gradually update my finished model topics. So please bear with me, why I ever went with photobucket when I frist started doing this I'll never know and now I'm kicking myself!! So bare with me chaps while I get pics swapped over Link to comment Share on other sites More sharing options...
Hunter Rose Posted July 3, 2017 Author Share Posted July 3, 2017 Aha! Flikr to the rescue! Sorry no updates on this one, will be soon, just getting pics sorted in my other active wip topics first On 28/06/2017 at 9:40 PM, S5 modeller said: Oh no! Not another one. Certainly shows up how bad the re pops are. Should fly together for you. Matt Thanks Matt I sure hope so! 1 Link to comment Share on other sites More sharing options...
rockpopandchips Posted July 3, 2017 Share Posted July 3, 2017 Looks like a very nice kit compared to the recasts. Good luck with this one. Looks like Photobucket has made a lot of enemies with their new T&C`s, all my threads are black as well now. moving over to flickr for the moment as most of my updates are done via my phone and the flickr app works very well. 1 Link to comment Share on other sites More sharing options...
Gimme Shelter Posted July 3, 2017 Share Posted July 3, 2017 so what's the story behind this particular kit - I'm not familiar with it but it looks like a vintage Horizon kit from looking at that sheet displaying some other Horizon dinosaur figures which I have and have spent a small fortune on based on their ages which date back to 1991 ish - do I assume this kit is an old original which is costly and hard to find - hence your comments about fit etc?? 1 Link to comment Share on other sites More sharing options...
Hunter Rose Posted July 3, 2017 Author Share Posted July 3, 2017 5 hours ago, rockpopandchips said: Looks like a very nice kit compared to the recasts. Good luck with this one. Looks like Photobucket has made a lot of enemies with their new T&C`s, all my threads are black as well now. moving over to flickr for the moment as most of my updates are done via my phone and the flickr app works very well. Yeah i noticed when i checked your hyper mega cannon build, its truly gutting isn't it? But yeah i went to flickr too, its way better than photobucket, only small thing is i wish you could get the IMG codes through the app. I did all my pixs and updates through my phone, but its cool just using the computer more now. 1 hour ago, Gimme Shelter said: so what's the story behind this particular kit - I'm not familiar with it but it looks like a vintage Horizon kit from looking at that sheet displaying some other Horizon dinosaur figures which I have and have spent a small fortune on based on their ages which date back to 1991 ish - do I assume this kit is an old original which is costly and hard to find - hence your comments about fit etc?? Yeah its an original Horizon kit, the guy I'm building it for is a big time spidey fan but never got round to building it due to wanting it to look better than he thought he could achieve. Which is nice for me, love the opportunity to work with original vinyl kits because yeah they can cost a fortune now or just be plain unavailable! 1 Link to comment Share on other sites More sharing options...
Hunter Rose Posted August 25, 2017 Author Share Posted August 25, 2017 Right time to bring another wip back to life! I'm feeling like my mojo is totally back now after the whole photobucket atom bomb and getting the scarlet spider comission done, so time to get this comission done too! So the plaster was mixed and poured in, and supported the bits to keep it all levelish and to avoid spills 20170703_134011 by Nick Frost, on Flickr 20170703_134015 by Nick Frost, on Flickr And once that had a day to dry (i like to be sure!) I began the pinning process, drilling holes and then trimming some thick wire which is superglued in. Started with the thighs onto the crotch part, forgot to take a pic but for these I used two bits of wire for strength per joint, but for the rest as the fit is so good; I want to be able to get the joins as spot on as I can which is much easier when you just use one section of wire. 20170822_133625 by Nick Frost, on Flickr 20170822_133942 by Nick Frost, on Flickr 20170822_134122 by Nick Frost, on Flickr 20170822_134126 by Nick Frost, on Flickr 20170823_131709 by Nick Frost, on Flickr 20170823_133632 by Nick Frost, on Flickr 20170823_133940 by Nick Frost, on Flickr 20170823_134409 by Nick Frost, on Flickr 20170824_132719 by Nick Frost, on Flickr 20170824_133018 by Nick Frost, on Flickr For the right leg which is bent, the lower leg is mot as straight forward as the other joins; but this is kit number three for me so forewarned is forearmed! I drilled an almost horizontal bit of wire which I bent so it lays along the thin bit of plaster with contact for extra strength, and then using a load of superglue whacked it in place. 20170824_133307 by Nick Frost, on Flickr 20170824_133458 by Nick Frost, on Flickr 20170824_133616 by Nick Frost, on Flickr 20170824_134411 by Nick Frost, on Flickr So all bits are glued together now and pinned 20170824_134426 by Nick Frost, on Flickr Break from the norm with this kit is this time I'm keeping it in two sections for painting, one because its easier to deal with but also because the join wont need to be filled as its where red meets blue and should have a black line between anyway. The other great thing about doing the proper kit is as you can see from this update the fit is amazingly good compared to the recasts I've been dealing with so I'll only need to fill the hip joins and the arm join just in the armpits, so hurrah!! Next Up I'll start filling and may trim the waist just to ensure its as good as it can be when I get them together after all painting. Thanks for looking, more soon 2 Link to comment Share on other sites More sharing options...
Hunter Rose Posted September 5, 2017 Author Share Posted September 5, 2017 Update! Been using filler to sort out the joint gaps, and after the insane amount of milliput I was using to fill web detail on the other spidey builds this feels like heaven! Just using good old squadron white for this bit of filling, and after a couple of rounds of sanding priming and sanding its almost there already. 20170831_131423 by Nick Frost, on Flickr 20170831_132416 by Nick Frost, on Flickr 20170831_133659 by Nick Frost, on Flickr 20170901_133105 by Nick Frost, on Flickr 20170904_131623 by Nick Frost, on Flickr 20170904_132206 by Nick Frost, on Flickr 20170904_132338 by Nick Frost, on Flickr 20170904_132348 by Nick Frost, on Flickr 20170904_133034 by Nick Frost, on Flickr 20170904_133340 by Nick Frost, on Flickr 20170904_133450 by Nick Frost, on Flickr I'm happy with how the arms are looking but his hip joints may need a little more work. Thanks for looking, more soon Link to comment Share on other sites More sharing options...
Hunter Rose Posted September 19, 2017 Author Share Posted September 19, 2017 Right! Time to stop procrastinating and get on with spidey, I've been stalling because the two sections dont fit together as well as I'd like (typical its the only join that doesn't!) but I've decided I'll just get the basic colours down and then just fill it after and touch up the paint. But anyway, I re-sanded the hip joins and after checking with primer it just needed more filler so I smeared some over. 20170905_132607 by Nick Frost, on Flickr 20170905_132831 by Nick Frost, on Flickr 20170905_133632 by Nick Frost, on Flickr The sanded the hell out of it again and sprayed more primer, I'm using white now so I can keep my colours strong. 20170906_134349 by Nick Frost, on Flickr 20170906_134652 by Nick Frost, on Flickr Then just to make painting easier I drilled some holes for thick gauge wire and after stuffing it with milliput I rammed it in with copious amounts of super glue 20170913_133448 by Nick Frost, on Flickr Then gave both halves a good blast of white primer 20170914_134744 by Nick Frost, on Flickr 20170914_134749 by Nick Frost, on Flickr And then today in my lunch break I made a start getting the red down, didn't get it all done because my airbrush had a bit of a blockage and it took a bit of time to sort out, but I'll get it sorted tomorrow. I really want this build done by the end of the month so I'm trying to get a wriggle on! 20170919_134915 by Nick Frost, on Flickr 20170919_134919 by Nick Frost, on Flickr So next up its finishing the red and then when its dry it'll be masking out and laying down the blue. Thanks for looking, more soon Link to comment Share on other sites More sharing options...
Hunter Rose Posted September 20, 2017 Author Share Posted September 20, 2017 Just a quickie, just got all the red finished, airbrush behaved today! 20170920_133739 by Nick Frost, on Flickr 20170920_133749 by Nick Frost, on Flickr So its masking off all the red areas next and I'll shoot some blue down. Thanks for looking, more soon Link to comment Share on other sites More sharing options...
rockpopandchips Posted September 20, 2017 Share Posted September 20, 2017 Looking like a very nice kit. 1 Link to comment Share on other sites More sharing options...
Will Vale Posted September 21, 2017 Share Posted September 21, 2017 That's such a tight set of spider buns, the original kit makes quite a difference! Love the red too W 1 Link to comment Share on other sites More sharing options...
Hunter Rose Posted September 21, 2017 Author Share Posted September 21, 2017 On 20/09/2017 at 3:52 PM, rockpopandchips said: Looking like a very nice kit. Cheers Brian, yeah it is but I must admit this being the third time I've done this spidey kit I'm looking forward to seeing the back of this one! 9 hours ago, Will Vale said: That's such a tight set of spider buns, the original kit makes quite a difference! Love the red too W Thanks Will! And yeah I'm actually very happy with the red, I've got in the lazy habit of rattle canning on cheap gloss red on the last couple of spideys so it was nice to get the airbrush out, and I think the finish on the x7 red is so much nicer! And I made a start on the masking today, once I've finished that I can get the blue down. 20170921_133233 by Nick Frost, on Flickr 20170921_134203 by Nick Frost, on Flickr Thanks for looking, more soon 2 Link to comment Share on other sites More sharing options...
Hunter Rose Posted September 29, 2017 Author Share Posted September 29, 2017 Update! I have got all the masking done on his torso, which was a bit trickier than I thought it would be due to all the bumpy muscles but it all got done fine. As tedious as it can be I find masking out quite relaxing. 20170927_134140 by Nick Frost, on Flickr 20170927_134147 by Nick Frost, on Flickr I find using kitchen roll wrapped around larger areas saves on masking tape, and looks funnier! 20170928_132556 by Nick Frost, on Flickr 20170928_132614 by Nick Frost, on Flickr Then I sprayed down my blue 20170928_134335 by Nick Frost, on Flickr Then it was my favorite bit, removing the masking tape; so satisfying! 20170928_135027 by Nick Frost, on Flickr 20170929_132153 by Nick Frost, on Flickr Had some tiny bits of red that came of with the masking tape which I touched up with a brush, and a little bit of overspray, but I'm happy with it, its making me feel like I'm getting somewhere now! Next up I'll mask off the red on the legs and spray them blue too. Thanks for looking, more soon 2 Link to comment Share on other sites More sharing options...
rockpopandchips Posted September 29, 2017 Share Posted September 29, 2017 Blistering spider bites hes looking good! 1 Link to comment Share on other sites More sharing options...
Hunter Rose Posted October 3, 2017 Author Share Posted October 3, 2017 Cheers Brian! I've managed to get his legs masked out, and more blue sprayed on 20171002_133720 by Nick Frost, on Flickr 20171002_135124 by Nick Frost, on Flickr Then I pulled off the tape and it worked pretty well, just a tiny bit of overspray to patch over on his ankle 20171003_132044 by Nick Frost, on Flickr 20171003_132104 by Nick Frost, on Flickr And now he's balanced precariously in a paper cup while the two halves dry after more wiring and a big blob of of milliput in between with a ton of superglue 20171003_134205 by Nick Frost, on Flickr I'm a little annoyed because the blue has come out slightly lighter on the legs, its my own stupid fault because there was a lot more red covering the torso which obviously affects the colour. I'm not too worried though as I think shading on the legs and highlighting on the torso will balance the whole thing out. Thanks for looking, more soon Link to comment Share on other sites More sharing options...
RACETRACK Posted October 3, 2017 Share Posted October 3, 2017 blimey this takes me back! I built this about 15-18 years ago. I drew very thin web lines on the costume with an indelible ink black pen, very tricky. This along with the Horizon Thing, Ghost Rider and Wolverine (yellow costume) still reside on my comic book shelf. I've still got the "mullet" Superman half built in the stash. Very well made kits, always wanted the Cable Kit... one day! 1 Link to comment Share on other sites More sharing options...
Hunter Rose Posted October 3, 2017 Author Share Posted October 3, 2017 Yeah my plan is to use an edding 0.03 fine liner for the webbing, fits nicely in the grooves but webbing on a spidey model is always arduous! And yeah the Cable kit is very nice, thats on my 'would like' list Link to comment Share on other sites More sharing options...
Meteors Posted October 3, 2017 Share Posted October 3, 2017 3 hours ago, Hunter Rose said: Yeah my plan is to use an edding 0.03 fine liner for the webbing, fits nicely in the grooves but webbing on a spidey model is always arduous! And yeah the Cable kit is very nice, thats on my 'would like' list What about using that Tamiya black panel liner, it flows really nicely in the grooves and you can easily clean up any little application blobs. This is looking fantastic by the way! 1 Link to comment Share on other sites More sharing options...
Hunter Rose Posted October 4, 2017 Author Share Posted October 4, 2017 10 hours ago, Meteors said: What about using that Tamiya black panel liner, it flows really nicely in the grooves and you can easily clean up any little application blobs. This is looking fantastic by the way! Thanks Meteors! I'd not heard of that so looked it up, looks very handy but some of the panel lines are going to need redrawing and sorting out, cant really rescribe vinyl very well so I think the pens my best option. Link to comment Share on other sites More sharing options...
Meteors Posted October 4, 2017 Share Posted October 4, 2017 27 minutes ago, Hunter Rose said: Thanks Meteors! I'd not heard of that so looked it up, looks very handy but some of the panel lines are going to need redrawing and sorting out, cant really rescribe vinyl very well so I think the pens my best option. Fair enough. Bear it in mind for future projects, it's a very nice product. Put down a coat of varnish and then touch the applicator brush that's in the panel liner bottle to a line (or webbing) junction, and the capillary action sucks it along with very little mess. Bit of cleanup with a cotton bud and some enamel thinners, and you're good to go. I used it on a bandai A-Wing with minuscule panel lines and it came up a treat. Good luck with old webhead! Link to comment Share on other sites More sharing options...
Hunter Rose Posted October 4, 2017 Author Share Posted October 4, 2017 Yeah will definitely bear it in mind. You know, its really irritating that I've worked on a few spidey kits of different brands and not one has ever been suitable for a simple panel wash, i guess the webbing is tricky to mold. Oh and justva quickie to show spidey together and dry 20171004_131104 by Nick Frost, on Flickr Next up I'll make a start marking out the webbing. Thanks for looking, more soon 1 Link to comment Share on other sites More sharing options...
Meteors Posted October 4, 2017 Share Posted October 4, 2017 Ok, I really want this kit now, looks great! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now