Warbird78 Posted June 3, 2017 Share Posted June 3, 2017 (edited) Hi all, Here is my latest bird. This is the well known Hasegawa Dora, here upgraded with some resin goodies. For those interested, upper wings are RLM76/82, fuselage and upper horizontal tail 81 and 82, underside and sides are 76/ bare metal. Engine covers are 76/71. Ailerons (underside) and rudder are 65. Paints are Gunze but I made my own mixes for 81 and 82, the rest is "out of the jar". The spinner spiral is copied on the one shown on "Schwarz 1 + I" of the same unit. It is a Fieseler built machine with an unknown Werknummer, so I've opted for something plausible (600378). Markings are a mix of self-made masks (thanks to my new Silhouette cuting machine, I strongly recommend it), wet transfers and decals. You may click on the photos to enlarge them. Cheers Tristan Edited June 8, 2017 by Warbird78 40 Link to comment Share on other sites More sharing options...
Tbolt Posted June 3, 2017 Share Posted June 3, 2017 Impressive 190, lovely work on the painting and weathering. Must have taken a while to rivet her. 1 Link to comment Share on other sites More sharing options...
lasermonkey Posted June 3, 2017 Share Posted June 3, 2017 Wow, what a beauty! Link to comment Share on other sites More sharing options...
Jens Posted June 3, 2017 Share Posted June 3, 2017 Stunning result! What kind of silhouette cutter do you have? Jens Link to comment Share on other sites More sharing options...
Avgas Posted June 3, 2017 Share Posted June 3, 2017 Very nice! Link to comment Share on other sites More sharing options...
matteo44 Posted June 3, 2017 Share Posted June 3, 2017 Fantastic model!! The weathering is perfect! Link to comment Share on other sites More sharing options...
airbus320 Posted June 3, 2017 Share Posted June 3, 2017 What a stunner! Chris Link to comment Share on other sites More sharing options...
doozer1974 Posted June 3, 2017 Share Posted June 3, 2017 A gorgeous Dora, most impressive! Link to comment Share on other sites More sharing options...
Pete in Lincs Posted June 3, 2017 Share Posted June 3, 2017 Simply fabulous. Link to comment Share on other sites More sharing options...
Warbird78 Posted June 4, 2017 Author Share Posted June 4, 2017 Thank you all for your kind messages! Tbolt, It took only a little less than forever to rivet her. Jens, I own a Silouhette Cameo 3. I think any Silouhette cutting machine will do the job. Cheers 1 Link to comment Share on other sites More sharing options...
Flyingdutchman Posted June 6, 2017 Share Posted June 6, 2017 What a beauty! The spinner spiral looks very nice. Evert Link to comment Share on other sites More sharing options...
batcode Posted June 6, 2017 Share Posted June 6, 2017 looks great,,,, the scheme and weathering looks superb....nice work... Link to comment Share on other sites More sharing options...
bearmatt Posted June 23, 2017 Share Posted June 23, 2017 Congrats, outstanding work! b. Link to comment Share on other sites More sharing options...
Mick Drover Posted June 23, 2017 Share Posted June 23, 2017 I'm certainly not a 190/109 type of guy but I like a model when I see a good one and that fits the bill. The weathering looks spot on. Not too much and not too little, just right. A nice Dora indeed. Mick Link to comment Share on other sites More sharing options...
Air-to-Air Posted June 23, 2017 Share Posted June 23, 2017 Beautiful workmanship. That was a real pleasure to see. Link to comment Share on other sites More sharing options...
Jindus Posted June 26, 2017 Share Posted June 26, 2017 An absolutely superb Dora. Link to comment Share on other sites More sharing options...
Warbird78 Posted June 27, 2017 Author Share Posted June 27, 2017 Thanks a lot! Link to comment Share on other sites More sharing options...
redcap Posted June 27, 2017 Share Posted June 27, 2017 Not many models could stand scrutiny to such close up photography. That is a deeply impressive build and paint job! Gary Link to comment Share on other sites More sharing options...
WildeSau75 Posted June 29, 2017 Share Posted June 29, 2017 Top build - love it. Cheers, Michael Link to comment Share on other sites More sharing options...
Warbird78 Posted July 2, 2017 Author Share Posted July 2, 2017 Thanks all, apreciated! Link to comment Share on other sites More sharing options...
Tbolt Posted July 2, 2017 Share Posted July 2, 2017 That is a work of art - very impressive finish. I've yet to work out how do to Luftwaffe mottle, my current effort I ended up with too tight line, I need to build a few quick kits to practice more. Link to comment Share on other sites More sharing options...
CheshireGap Posted July 3, 2017 Share Posted July 3, 2017 Lovely suble work on the rivetting - is that using a beading tool rather than a wheel, or are they HGW's rivets? Link to comment Share on other sites More sharing options...
corsaircorp Posted July 3, 2017 Share Posted July 3, 2017 Hello Warbird, OMG, what a beautifull 190, I'm a bit jealous !! Congratulations, you did great, hope that mine will be a tenth as good as your ! Bravo Sincerely. Corsaircorp Link to comment Share on other sites More sharing options...
Warbird78 Posted July 4, 2017 Author Share Posted July 4, 2017 Thank you! CheshireGap, I used a beading tool. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now