Lowbrow Posted May 25, 2017 Share Posted May 25, 2017 My latest "arms length" build. Original tool Frog Typhoon. While mine is the header card version from the 70s the tool itself is from 1959 I believe. Other than using Xtradecals and blocking off the oil cooler with a bit of plastic card it's entirely box stock. Like my previous Frog Hunter it has no wheel wells. Unlike the Hunter there is no pilot head molded in, the cockpit is simply a large hole. I used Tamiya acrylics for all colors and decided to keep the weathering to a minimum. Panel lines, like my 109K, are basically mechanical pencil with 2B lead. I realize it's a far cry from Airfix's new offering but I still enjoyed building and painting it and will eventually build the better Airfix kit which I also have. 34 Link to comment Share on other sites More sharing options...
Martian Posted May 25, 2017 Share Posted May 25, 2017 Another excellent build! Martian 1 Link to comment Share on other sites More sharing options...
cngaero Posted May 25, 2017 Share Posted May 25, 2017 That's another beautifully built and finished model of an old, old kit. This can hold it's head up high in any collection. 2 Link to comment Share on other sites More sharing options...
Vulcanicity Posted May 25, 2017 Share Posted May 25, 2017 That's a super build - just goes to show that with excellent construction and painting an old kit can still look the part! 1 Link to comment Share on other sites More sharing options...
Darby Posted May 25, 2017 Share Posted May 25, 2017 Nice work on an old kit. Pity about the wheel wells. IIRC remember the Gannet was a similar format regarding those. 1 Link to comment Share on other sites More sharing options...
spaddad Posted May 25, 2017 Share Posted May 25, 2017 tasty 1 Link to comment Share on other sites More sharing options...
stevehnz Posted May 25, 2017 Share Posted May 25, 2017 A nice job on that & a great example of how a good paint job can transform a clunker into a ramp queen. Steve. 1 Link to comment Share on other sites More sharing options...
Bangor Lad Posted May 25, 2017 Share Posted May 25, 2017 It's always pleasantly surprising how well these old, old kits turn particularly when built with care and passion. They were made to be built weren't they? Thanks for sharing. Cheers 1 Link to comment Share on other sites More sharing options...
Gerrardandrews Posted May 26, 2017 Share Posted May 26, 2017 A survivor kit, with lots of soul, something about them, as well made as yours, makes them better than the modern tooling, its odd😊 1 Link to comment Share on other sites More sharing options...
Lowbrow Posted May 26, 2017 Author Share Posted May 26, 2017 Thank you everyone! Next up, if I can manage not to muck it up in the next few days, is an old Heller kit.... 1 Link to comment Share on other sites More sharing options...
John Masters Posted May 26, 2017 Share Posted May 26, 2017 Lovely build of an older kit. Thanks for the info on the panel lines...I'll us that on my next build. 1 Link to comment Share on other sites More sharing options...
Kenny Stevens Posted May 26, 2017 Share Posted May 26, 2017 Hiya Lowbrow. That looks a great finish. Can you tell me,was it airbrushed? Are Tamiya acrylics good for airbrushing? Airbrushing novice here and wanting to learn how to get the best out of my new toy you see. Thanks,Ken. 1 Link to comment Share on other sites More sharing options...
jean Posted May 26, 2017 Share Posted May 26, 2017 Great job on this ante-diluvian Typhoon. It does scrub up well with a lot of TLC. Funny, I do have it in my stash, but I do not recall the model not having any wheel wells... I will have to revisit it, to be sure, to be sure. Well done! JR 1 Link to comment Share on other sites More sharing options...
Lowbrow Posted May 26, 2017 Author Share Posted May 26, 2017 1 hour ago, John D.C. Masters said: Lovely build of an older kit. Thanks for the info on the panel lines...I'll us that on my next build. Yeah, I paint the model in matt finish then draw the panel lines on before I spray on the floor wax. Going through the gloss/matt finish process tones down the metallic look of the graphite and seals it in as well. I generally use strips of masking tape as a straight edge. Link to comment Share on other sites More sharing options...
Lowbrow Posted May 26, 2017 Author Share Posted May 26, 2017 1 hour ago, Kenny Stevens said: Hiya Lowbrow. That looks a great finish. Can you tell me,was it airbrushed? Are Tamiya acrylics good for airbrushing? Airbrushing novice here and wanting to learn how to get the best out of my new toy you see. Thanks,Ken. Hi Ken, Yes, everything is airbrushed. Tamiya acrylics are excellent for airbrushing. They require minimal thinning. I generally find about 10-20% thinning medium ( I use water) to 80-90% paint. IMHO, the best way to come to grips with airbrushing is to do a lot of it. It really comes down to feel, and that feel only comes with experience. I'll also add one of the most important tips I can think of...keep your brush clean. Learn to disassemble and clean it thoroughly and do it after every spray session. Not all will agree with this, but to me, it's very important to ensure maximum performance and predictability. 1 Link to comment Share on other sites More sharing options...
Chris Thomas Posted May 27, 2017 Share Posted May 27, 2017 Oh yesss .... like meeting an old friend you haven't seen for years. I was very excited when this kit appeared in 1959 as it meant I could stop trying to hollow out the radiator fairing of the balsa Typhoon I was trying to build, using a broken razor blade. The kit had some flaws - an elongated and blunt spinner, fat rear fuselage, thick fin and an undercarriage crude by todays standard (although it was superior to that on Airfix's first Typhoon which appeared about the same time). But it had some 'advanced' features too - exhaust stubs that protruded through a slot in the fuselage shell, a rather elegant propeller with a separate spinner and, for the time, a thin canopy. If I remember correctly it had markings inscribed on the plastic to aid decal placement; mmm ... Decal research was not too advanced in those days. Codes were FD-N, which seem to have been scrambled from an early IPMS mag that featured a photo of an 'F' coded Typhoon alleged to be of 416 Sqn, whose unit codes were known to be 'DN'. A unit that only flew Spits during the war and its immediate aftermath. So its a pleasure to see this beautifully painted model in authentic markings, with little attempt to correct the intrinsic flaws. It looks so much better than the ones I made! It is also a relief to see a 198 Sqn Typhoon, especially TP-V MN526, depicted without the usual red codes - which I believe never existed. I wish Edgar was still here to argue about it. Thank you Lowbrow CT 1 Link to comment Share on other sites More sharing options...
mcdonnell Posted May 28, 2017 Share Posted May 28, 2017 Hello and welcome to the Forum,Lowbrow. I admire everything about this Typhoon build.As fellow colleagues have already mentioned this fabulous model can rub shoulders with the latest creations without doubt.It's a credit to Frog and also your Goodself.Superb work and results. 😉👍 All the best,Paul. Link to comment Share on other sites More sharing options...
Kenny Stevens Posted June 1, 2017 Share Posted June 1, 2017 On 26/05/2017 at 18:12, Lowbrow said: Hi Ken, Yes, everything is airbrushed. Tamiya acrylics are excellent for airbrushing. They require minimal thinning. I generally find about 10-20% thinning medium ( I use water) to 80-90% paint. IMHO, the best way to come to grips with airbrushing is to do a lot of it. It really comes down to feel, and that feel only comes with experience. I'll also add one of the most important tips I can think of...keep your brush clean. Learn to disassemble and clean it thoroughly and do it after every spray session. Not all will agree with this, but to me, it's very important to ensure maximum performance and predictability. Thanks for that Lowbrow. Wow,just plain water then. Sounds like I need to get some practice in with my Iwata. Mark(Miggers)told me that it's really important to keep everything as clean as possible,he should know,he's got alot of experience and skill with airbrushes plus,like me,he's professional paint sprayer,and I know it pays big dividends to keep guns good and clean. I can get gun wash from work,so it shouldn't be a problem keeping my airbrush clean at all. Many thanks,Ken. Link to comment Share on other sites More sharing options...
F-32 Posted June 1, 2017 Share Posted June 1, 2017 Very nicely done, great result from such an old kit 1 Link to comment Share on other sites More sharing options...
bigbadbadge Posted June 1, 2017 Share Posted June 1, 2017 This is lovely, what a great job you have done. Likethe way you have drawn on the panel lines to great tip thanks All the best Chris 1 Link to comment Share on other sites More sharing options...
stevej60 Posted June 1, 2017 Share Posted June 1, 2017 Excellent job! 1 Link to comment Share on other sites More sharing options...
TonyTiger66 Posted June 1, 2017 Share Posted June 1, 2017 Just lovely I have two in the stash and I've been fretting over if I should sell or build. This makes me decide on *build*! The canopy is nice; is it original? Gorgeous paintwork. TonyT 1 Link to comment Share on other sites More sharing options...
Lowbrow Posted June 2, 2017 Author Share Posted June 2, 2017 Thanks all. Yup, original canopy. Built box stock with exceptions mentioned in description, namely decals and blanking plate in radiator. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now