peterh Posted April 26, 2017 Share Posted April 26, 2017 Another WNW kit. I'm really beginning to enjoy these and the more rigging I do the more confident I am with it. I'm still having problems with turnbuckle alignment but next time I'll fix the rigging to the turnbuckle then glue to the wing. More of a fiddle but the turnbuckles should then be in line with the rigging. All OOTB apart from the Gaspatch turnbuckles. EZ line for the rigging. I understand that these didn't get too weathered so apart from a bit of dust/dirt from the wheels I'll leave alone. One final thing-I really need to become proficient at bending the Spandau etched brass jacket as solid plastic does detract from the finished result. 23 Link to comment Share on other sites More sharing options...
Ali62 Posted April 26, 2017 Share Posted April 26, 2017 Great looking Rumpler, well done, keep up the good work. Ali Link to comment Share on other sites More sharing options...
Gerrardandrews Posted April 26, 2017 Share Posted April 26, 2017 Really great looking model, joy to look at😊 Link to comment Share on other sites More sharing options...
Martin Ford Posted April 26, 2017 Share Posted April 26, 2017 That's a cracker. I haven't taken the plunge as yet with a Wingnut kit. Maybe soon but I'm sure it wouldn't look this good. Link to comment Share on other sites More sharing options...
ColinChipmunkfan Posted April 26, 2017 Share Posted April 26, 2017 Great effort, model looks really good. Have not started rigging my wnw yet, you have kick started me, have not made turnbuckles yet so any comments and tips much appreciated. Link to comment Share on other sites More sharing options...
DaveyGair Posted April 26, 2017 Share Posted April 26, 2017 On the verge of buying one or two WNW kits, even though WW1 isn't my thing, the kits look fantastic. Just all the rigging puts me off a bit, although may start with a Roland C IIa or, the one I really fancy, the Hansa W.12. Don't think I'd bother with turnbuckles though, after much contemplation, a couple of blobs of glue in the appropriate place may suffice. and nice one. Davey. Link to comment Share on other sites More sharing options...
WildeSau75 Posted April 27, 2017 Share Posted April 27, 2017 Another top notch build of a WWI kit - just wow. Cheers, Michael Link to comment Share on other sites More sharing options...
Viking Posted April 27, 2017 Share Posted April 27, 2017 What a beauty, you have acheived a lovely finish on that. It's one to be proud of, most definately! Cheers John Link to comment Share on other sites More sharing options...
Gorby Posted April 27, 2017 Share Posted April 27, 2017 Wow! Amazing model! Link to comment Share on other sites More sharing options...
GrahamB Posted April 27, 2017 Share Posted April 27, 2017 (edited) Beautifully done, Peter, and in the LVG scheme I really like too. As for your turnbuckle problem - here is an easy (although fiddly) solution to make them flexible: with Gaspatch turnbuckles (I use their 1/48 variety not 1/32 for my WNW as they look more subtle and in keeping with photographs - even though the 1/32 may be "correct" in scale), thread a short length (say, 2cm) of fine copper wire (mine are from 13-strand plastic-sheathed electronics wire) through one of the eyelets, double it back and twist as per Bob's Buckles to form a tidy loop - not too tight though - around the turnbuckle's eye; cut twisted length to about 2mm. This can then be inserted into the pre-drilled rigging point but be careful not to glue the eyelets. Done - nice flexible rigging point, whether you use monofilament or de-stranded Easyline (as I do). Cheers GrahamB Edited April 28, 2017 by GrahamB clarity 1 Link to comment Share on other sites More sharing options...
batcode Posted April 28, 2017 Share Posted April 28, 2017 looks great, nice work Link to comment Share on other sites More sharing options...
hacker Posted April 28, 2017 Share Posted April 28, 2017 nice work. l got a 1/72 l have to finish but l need to know the length of those wing struts as mine are all either too short in the kit or missing completely Link to comment Share on other sites More sharing options...
russ c Posted April 28, 2017 Share Posted April 28, 2017 Really nice build there, looks great Link to comment Share on other sites More sharing options...
peterh Posted April 28, 2017 Author Share Posted April 28, 2017 19 hours ago, GrahamB said: Beautifully done, Peter, and in the LVG scheme I really like too. As for your turnbuckle problem - here is an easy (although fiddly) solution to make them flexible: with Gaspatch turnbuckles (I use their 1/48 variety not 1/32 for my WNW as they look more subtle and in keeping with photographs - even though they may be "correct" in scale), thread a short length (say, 2cm) of fine copper wire (mine are from 13-strand plastic-sheathed electronics wire) through one of the eyelets, double it back and twist as per Bob's Buckles to form a tidy loop - not too tight though - around the turnbuckle's eye; cut twisted length to about 2mm. This can then be inserted into the pre-drilled rigging point but be careful not to glue the eyelets. Done - nice flexible rigging point, whether you use monofilament or de-stranded Easyline (as I do). Cheers GrahamB Hi Graham. Many thanks for the tip. I'll be trying it out on my next build. I much prefer the detail that you get with a WWI kit. The only downside is the loss of my eyesight! Need to get the rigging sorted as I have both the AEG and Gotha on my pile and I need to do them justice. Thanks for commenting. Peter Link to comment Share on other sites More sharing options...
GrahamB Posted April 28, 2017 Share Posted April 28, 2017 4 hours ago, peterh said: Hi Graham. Many thanks for the tip. I'll be trying it out on my next build. I much prefer the detail that you get with a WWI kit. The only downside is the loss of my eyesight! Need to get the rigging sorted as I have both the AEG and Gotha on my pile and I need to do them justice. Thanks for commenting. Peter Glad to be of help. I'm also learning and trying out things as I go along with the WNW kits (and other rigging - including 1/700 ships). I'd probably do monofilament rigging in preference to various elasticated threads but find the method of returning the thread through a short length of brass or other tube difficult and I don't like/find unconvincing the final appearance - even in the best examples. What is needed IMHO is some kind of heat-shrinking plastic tube that squeezes onto the line. The main problem with the Easyline/UvR thread method is getting the knot (simple hitch) at the apex of the eyelet so that the main thread will run off straight ahead. Sometimes a third hand (my wife's!) can be useful to hold both loose ends tight and applying the tiny dab of superglue. Good luck with your next projects - Gotha and AEG too big (and expensive) for me. Waiting for the bird's nest/cat's cradle of rigging that is the promised WNW Taube! Cheers GrahamB Link to comment Share on other sites More sharing options...
kiwitrogg Posted April 29, 2017 Share Posted April 29, 2017 Very nice, well done. Cheers Gaz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now