CedB Posted April 13, 2017 Share Posted April 13, 2017 When Procopius was over here for the BoB 75th we met 06/24 at Duxford and had a trip in the Rapide. I bought the Heller kit there and promised to build it as the one we flew in: Look at those stripes... I wish we'd flown in the silver one now I'm using the Heller kit with KPE PE. Off we go. First problem was that the wings are connected to the sprue with an overlapping gate and they need careful cutting: If they haven't fallen off already. Then I decided to get the i/p out of the way: Nice, but tiny (yes, those are 1cm squares). After sanding the plastic flat I used Gator's Grip Thin to stick it all together which, I hope, will have the added benefit of simulating the glass in the dials: Macro shot's a bit fuzzy on the edges but it gives you the idea. Nice. 18 Link to comment Share on other sites More sharing options...
HP42 Posted April 13, 2017 Share Posted April 13, 2017 Straight in the front row.... I've built one of these for a relative but have another in the stash for myself. I've flown in both Duxford examples. The tail wheel burst on landing when I was flying in it. Didn't actually notice it in truth! 2 Link to comment Share on other sites More sharing options...
giemme Posted April 13, 2017 Share Posted April 13, 2017 This sounds like a fascinating diversion from the usual subjects I'm in Great job on the IP so far, it must be really tiny Ciao 1 Link to comment Share on other sites More sharing options...
Biggles87 Posted April 13, 2017 Share Posted April 13, 2017 Me too! I have a Rapide story for you, well I would wouldn't I? When I worked at Liverpool Airport I joined the local flying club as I had a PPL in those days, and the owner, Jim Keene bought a Rapide to use for navigation training. One day he asked me if I'd like some free flying and suggested that if I washed the Rapide he would give me a free hour each time I did it, and as I was always short of cash I readily accepted. I only did it 2 or 3 times as it took a whole day each time and I always came away wet and filthy. He also offered me a flight in it but a couple of days before it was due, one of a local Sky Diving team put a boot through the lower wing in his haste to get out ( I never understood why anyone would want to jump out of a perfectly serviceable aeroplane ), and before it was repaired I was posted to Manchester. John PS if you're getting bored with my stories please tell me, and I'll post them on someone else's thread. 11 1 Link to comment Share on other sites More sharing options...
janneman36 Posted April 13, 2017 Share Posted April 13, 2017 Lovely to see this one build, i have flown in it in 1997.. We had such a stiff crosswind that i could see the grass runway from my right seat trough the left passenger windows. Maybe needless to say that we where the last flight of the day.. The landing was nevertheless smooth.. 5 Link to comment Share on other sites More sharing options...
philp Posted April 13, 2017 Share Posted April 13, 2017 Nice start Ced. Those stripes should be fairly easy to mask with some thin or even pinstriping tape. 1 Link to comment Share on other sites More sharing options...
CedB Posted April 13, 2017 Author Share Posted April 13, 2017 Hi Phil and welcome Burst tailwheel, crikey! Thanks Giorgio and welcome Hi John and welcome PLEASE continue with the stories, I love 'em. I'm a time-lapsed PPL so they're of great interest. Hi janneman36 and welcome During our finals the pilot did a very cheeky side slip to lose height - I thought I'd video'd it but had my usual problem with iPhone videos; it didn't start and when I 'pressed the record button' again took a great video of my lap. Rats. I guess flying these with a full load and tiny flaps is, er, interesting. Hi Phil and welcome Thin tape. Good idea - see below. The plastic on this kit is interesting eh? Very springy and quite soft. Oh joy. I'm not sure the floor should be this bent? Untitled by Ced Bufton, on Flickr There's also a record number of ejector marks in the internals: Must be the soft plastic. Some time ago I photographed the fuselage and scaled the picture of the real aircraft to give me some options for the stripes: This allowed me to measure the scale width of the stripes: Stop laughing you lot! I reckon that's oooh, narrow. Practicality tells me it's 0.7mm - they obviously used 'industry standard' 1/72 masking tape and scaled it up - not. I've ordered some 0.4 and 0.7mm Micron masking tape from Valiant Wings where it seems to be very good value - grab some while they have stock! 14 Link to comment Share on other sites More sharing options...
CedB Posted April 13, 2017 Author Share Posted April 13, 2017 Using various instruments of destruction I've attacked the ejector marks: Untitled by Ced Bufton, on Flickr and applied some Liquid Green Stuff: I might brush paint the internals for a laugh. Reference shot: Which balding Gentleman is me? Ha ha, fooled you, I'm wearing a hat. What's that Lassie? Someone's fallen down the well? No? Escape hatch. There's an escape hatch. Not on the model. From that photo it looks like a clear window but from the reference shots it's not really visible on the outside. Right, I'll ignore it then. 14 Link to comment Share on other sites More sharing options...
DAG058 Posted April 13, 2017 Share Posted April 13, 2017 Looking forward to another one from you Ced! 1 Link to comment Share on other sites More sharing options...
nimrod54 Posted April 13, 2017 Share Posted April 13, 2017 Ced, I wondered if these may be a good alternative if the masking doesn't work out Xtradecal Stripes, that way you would only need to worry about the tapered end sections. 1 Link to comment Share on other sites More sharing options...
PlaStix Posted April 13, 2017 Share Posted April 13, 2017 Nice start Ced of an 'interesting' kit! Kind regards, Stix 1 Link to comment Share on other sites More sharing options...
keefr22 Posted April 13, 2017 Share Posted April 13, 2017 7 hours ago, Biggles87 said: ( I never understood why anyone would want to jump out of a perfectly serviceable aeroplane ) Me neither, always thought it a very odd idea! A Rapide giving pleasure flights from Swansea's Fairwood airport was the first aerplane I ever flew in, when my late dad treated us to a trip - thanks dad, for my lifelong love of aviation! Anyway Ced, the software says your OP was 7 hours ago, & you've done more in that time than I have in the last 7 days. Soon be finished then! And that Aizu tape is lovely stuff, don't think you'll be disappointed! Keith 4 Link to comment Share on other sites More sharing options...
rob85 Posted April 13, 2017 Share Posted April 13, 2017 Very nice build choice Ced, something a bit different! And I do like the rapide! rob 1 Link to comment Share on other sites More sharing options...
TheBaron Posted April 13, 2017 Share Posted April 13, 2017 I say Ced. A handsome subject and a nice personal backstory. Watching this with relish. BTW, if those white stripes become a pain to paint, I've some white decal I can send you over to cut to size. Good luck with this! Tony 1 Link to comment Share on other sites More sharing options...
CedB Posted April 13, 2017 Author Share Posted April 13, 2017 Thanks DAG and welcome Hi John! Nice to see you I bought some stripes at Telford, Xtradecal XPS2 but, as you say, it leaves me with the tapered ends. Hi Stix and welcome Hi Keith, good to have you along and I'm glad the subject brings back memories Hi Rob and welcome - they're nice Rapides aren't they Hi Tony and welcome - thanks for the decal offer - I have some too but cutting very thin strips has never been beyond me. Might be worth a try later 2 Link to comment Share on other sites More sharing options...
Procopius Posted April 14, 2017 Share Posted April 14, 2017 Flying in this Rapide remains one of my most treasured memories -- as we taxied, we passed Spitfire after Spitfire all lined up, and for one incredible moment, it was 1944. Some people live their whole lives without that kind of magic entering it, but not me. 13 Link to comment Share on other sites More sharing options...
CedB Posted April 14, 2017 Author Share Posted April 14, 2017 Here you go PC (Note to self, Interior Green cockpit) 13 Link to comment Share on other sites More sharing options...
keefr22 Posted April 14, 2017 Share Posted April 14, 2017 What a wonderful view the pilot has! K 2 Link to comment Share on other sites More sharing options...
CedB Posted April 14, 2017 Author Share Posted April 14, 2017 Thanks Keith Certainly is a great view. Internals given a couple of coats but need more attention (including re-painting the cockpit IG): Untitled by Ced Bufton, on Flickr We're off to a wedding today so I doubt that I'll have much more time. 11 Link to comment Share on other sites More sharing options...
The Spadgent Posted April 14, 2017 Share Posted April 14, 2017 Lovely story and subject Ced. That IP looks great too. If you get stuck with decal woes you could paint the stripe section first then cut a couple of slivers of Tamiya tape as masks, you could even draw and cut the tapered end this way, then spray the main colour. Easy probably. I think someone said this on your mossie thread too. which ever way happens I'll get some and watch with wonder. Great stuff. Have a nice time at the wedding. johnny 2 Link to comment Share on other sites More sharing options...
keefr22 Posted April 14, 2017 Share Posted April 14, 2017 30 minutes ago, The Spadgent said: I think someone said this on your mossie thread too. That would be me. I always come up with these great ideas. For other people to try out....!! Keith 3 1 Link to comment Share on other sites More sharing options...
HP42 Posted April 14, 2017 Share Posted April 14, 2017 Just reminded me of my version of HG691 I did many years back. The thread is still on here. http://www.britmodeller.com/forums/index.php?/topic/41118-172-dehavilland-dragon-rapideor-is-it-a-dominie/#comment-434907 2 Link to comment Share on other sites More sharing options...
Stew Dapple Posted April 14, 2017 Share Posted April 14, 2017 Nice to see this one under way Ced, I've long been a fan of the Dragon Rapide (even the name is brilliant!) Cheers, Stew 2 Link to comment Share on other sites More sharing options...
Cookenbacher Posted April 14, 2017 Share Posted April 14, 2017 It's true Stew, the name itself is a stand out. Looking forward to this one Ced! 2 Link to comment Share on other sites More sharing options...
TheBaron Posted April 15, 2017 Share Posted April 15, 2017 16 hours ago, Stew Dapple said: I've long been a fan of the Dragon Rapide (even the name is brilliant! 10 hours ago, Cookenbacher said: the name itself is a stand out. Absolutely. The Dragon Rapide sounds like the perfect name for an interwar cocktail. I must consult the drinks cabinet in the name of science - I shall keep careful notes in case anything happens to me, so that others may follow my work.... 3 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now