Jump to content

Steel Seatbelt Sets French,, IJAAF, Mig-21, F-4. 1:32


Recommended Posts

Steel Seatbelt Sets French WWI, IJAAF WWII, Mig-21, F-4.

1:32 Eduard

packs.jpg

 

Continuing with their releases of steel seatbelts, Eduard have sent four more to BM Towers for us to look at. As with the previous releases, these are also pre-painted and appear to be remarkably flexible, and even with quite rough handling the paint adheres to the metal really well.They are still made from 0.1mm sheet with the resulting etch is thin at around 0.06mm and have the same details printed on them, such as the webbing, stitching, and shadowing. Unlike some sets, all the buckles and clasps are etched as part of the strapping, so there is no fiddly work required to assemble each belt.
 

[32889 – French WWI] – There are five sets of belts included on the single sheet. There are five pairs of lap belts covering the different styles used throughout the war. These are very well painted and very colourful.

 

french.jpg

 

bin.jpg

 

[32890 – IJAAF WWII] – In this set there are twelve lap belts, four for Nakajima aircraft in leather, and four in cloth, plus four for Kawasaki aircraft also looking like leather. Each buckle, on the left hand belt section also has a protective pad fitted beneath it.

 

ijaaf.jpg

 

bin.jpg

 

[32895 – Mig-21] – Naturally this set only contains one complete seat set of belts. It includes the back fixture, shoulder straps, leg straps and a very nice ejection handle.The straps do have some very nicely done shading on the parts.

 

mig21.jpg

 

bin.jpg

 

[32896– F-4 Phantom] – This twin seat set contains all manner of straps for you big Phantom seats. They include straps for the headrest, and backrest. Then there are the shoulder and lap straps, and finally the leg restraints. You will have to check your references when using this set as I don’t know if all F-4 seats were the same.

 

f4.jpg

 

bin.jpg

F-4 Seatbelts Grey (32898) - As above but in grey.

 

etch.jpg

 

bin.jpg

 

Conclusion

Those who build in the larger scales generally try to add greater levels of detail into their models, showing much skill and technique. Now, those of us who aren’t endowed with super skills can at least have some nice looking seatbelts fitted to our models, with very little skill needed, other than a bit of bending and gluing.  Of course the belts can still be weathered more if required.

 

 

 

Review sample courtesy of

logo.gif

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...