FrancisGL Posted October 22, 2016 Share Posted October 22, 2016 (edited) Hi Pals,I have a "new" kit to mount / share with you, this time it is a SPG ITALERI M-109, a very old kit, but I think you can still get a good result.Personally not that I like a lot (not a tank), but as I had saved for 15 years in a closet, I decided to give it a try. I made one much longer the same, although with long gun, but I did not get a good result, so I ended up with, in the case of spare parts.Now with more enthusiasm, more resources and skill, it is time for a second attempt, proving the G version of "short" cannon, which I like for its powerful appearance while compact, and appears to be less seen ...Without further ado, the show starts ... A few pictures to begin with, fellow Greetings. I include a link to the RFI feature with the model checking if someone wants to see it. This kit brings par to 4 versions (long time ago when I did, I think they were just 3 ...), as I said before'll try with the G, short-barreled.To start, I finished all the undercarriage, and I hit the friontal and rear of the hull, which I have smoothed their unión. Thx for looking and comments... Edited December 23, 2016 by FrancisGL Update post 7 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 22, 2016 Author Share Posted October 22, 2016 Thx for your likes Dads203 and beefy66, cheers mates Link to comment Share on other sites More sharing options...
phildagreek Posted October 22, 2016 Share Posted October 22, 2016 1 Link to comment Share on other sites More sharing options...
Badder Posted October 22, 2016 Share Posted October 22, 2016 Much goodness of the luck Francis. Sure I am that a good jobbing you will do! Rearguards, Badder. 1 Link to comment Share on other sites More sharing options...
DAG058 Posted October 22, 2016 Share Posted October 22, 2016 I'm with you on this one! 1 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 22, 2016 Author Share Posted October 22, 2016 3 hours ago, phildagreek said: Thx mate, cheers 1 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 22, 2016 Author Share Posted October 22, 2016 2 hours ago, Badder said: Much goodness of the luck Francis. Sure I am that a good jobbing you will do! Rearguards, Badder. Thank you very much for the trust, I really try. Cheers Badder Link to comment Share on other sites More sharing options...
FrancisGL Posted October 22, 2016 Author Share Posted October 22, 2016 2 hours ago, DAG058 said: I'm with you on this one! Thx mate, much better accompanied, cheers DAG058 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 24, 2016 Author Share Posted October 24, 2016 UPDATE 2: Hi Pals,Today I joined the top part of the hull to rest, but again, i had to "force" the piece to fit as it should, because I'm seeing, that over time, the plastic is bent / deformed.You can see in the top area of lighter color. I have also mounted sets of parts for the gun, and I'm filing so they are best.Then turn the turret, which is also twisted, (You can see a clearer part in the plastic ). I have put in place to see how it will... Thx for watch and comment, cheers mates 4 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 24, 2016 Author Share Posted October 24, 2016 Thx for your like Dads, cheers mate Link to comment Share on other sites More sharing options...
FrancisGL Posted October 24, 2016 Author Share Posted October 24, 2016 Thx fatfingers for your like, cheers mate Link to comment Share on other sites More sharing options...
phildagreek Posted October 24, 2016 Share Posted October 24, 2016 Looks good Francis, if it was easy what fun would it be? 1 Link to comment Share on other sites More sharing options...
Dads203 Posted October 24, 2016 Share Posted October 24, 2016 Another one to keep an eye on Francis, keep up the good work 1 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 25, 2016 Author Share Posted October 25, 2016 (edited) 12 hours ago, phildagreek said: Looks good Francis, if it was easy what fun would it be? You're right Phil , thx for your like and kind comment, cheers mate Edited October 25, 2016 by FrancisGL Link to comment Share on other sites More sharing options...
FrancisGL Posted October 25, 2016 Author Share Posted October 25, 2016 12 hours ago, Dads203 said: Another one to keep an eye on Francis, keep up the good work Thx for your attention man , and your like and kind comment, cheers Dan Link to comment Share on other sites More sharing options...
FrancisGL Posted October 25, 2016 Author Share Posted October 25, 2016 Thx for your like PhantomMajor, cheers mate Link to comment Share on other sites More sharing options...
FrancisGL Posted October 28, 2016 Author Share Posted October 28, 2016 Update 03: Hi Pals, Photobucket seems to still have problems, since there was DDOS attack and affection do about him, but I could finally do the update, continued with the assembly, a small added, wire coil, it is empty, so, I've put thread fisherman, and is more real.The backhoes are also in place. With the 0.50, I have also done something to improve, drilling the barrel, and mark with the drill ventilation holes. A set of small items, also in place around the model, which makes takes shape. More progress soon, thx for watch and comment. Cheers fellows. 5 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 28, 2016 Author Share Posted October 28, 2016 (edited) Thx for your like Dads203 (is the number 1000..lol), cheers mate Edited October 28, 2016 by FrancisGL Link to comment Share on other sites More sharing options...
Bullbasket Posted October 28, 2016 Share Posted October 28, 2016 Sometimes, the old kit that you've had for many years, that's sat at the back of the cupboard, can give a lot of pleasure when you do build it, probably because it is old and is not the latest slide mould technology. I've built three of Revell's Crusaders and thoroughly enjoyed doing so. Nice work so far. I look forward to seeing some paint on it. John. 2 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 28, 2016 Author Share Posted October 28, 2016 4 hours ago, Bullbasket said: Sometimes, the old kit that you've had for many years, that's sat at the back of the cupboard, can give a lot of pleasure when you do build it, probably because it is old and is not the latest slide mould technology. I've built three of Revell's Crusaders and thoroughly enjoyed doing so. Nice work so far. I look forward to seeing some paint on it. John. Thx a lot for your like a kind comment, me too want some paint on it, soon with some luck, I would like to ask you a question, where you bought the tracks ?, if you would be so kind to give me a link, and give me your opinion about the store, recommend? ... I would be very grateful. Cheers John Link to comment Share on other sites More sharing options...
Gremlin56 Posted October 29, 2016 Share Posted October 29, 2016 Hi Francis, good to see you back with a new project! Heavy metal again, nice. 1 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 29, 2016 Author Share Posted October 29, 2016 21 minutes ago, Gremlin56 said: Hi Francis, good to see you back with a new project! Heavy metal again, nice. Thx for your like and kind comment, you're right, the soft skin, I do not like so much. Cheers Julian Link to comment Share on other sites More sharing options...
Bullbasket Posted October 29, 2016 Share Posted October 29, 2016 11 hours ago, FrancisGL said: Thx a lot for your like a kind comment, me too want some paint on it, soon with some luck, I would like to ask you a question, where you bought the tracks ?, if you would be so kind to give me a link, and give me your opinion about the store, recommend? ... I would be very grateful. Cheers John I actually bought the tracks for the Centaur at the Nationals at Telford a few years ago, but you can buy them direct from the Fruilmodels site. They are quite good to deal with and the price is reasonable. Alternatively, you can get them from Historex Agents in the UK. I've dealt with them many times and they are fast and efficient (and the exchange rate is good for you at the moment). HTH's. John. http://www.historexagents.com/shop/hxsearchresults.php?SupplierCode=FR http://www.friulmodel.hu/en/products/ 1 Link to comment Share on other sites More sharing options...
FrancisGL Posted October 30, 2016 Author Share Posted October 30, 2016 On 29/10/2016 at 10:52 AM, Bullbasket said: I actually bought the tracks for the Centaur at the Nationals at Telford a few years ago, but you can buy them direct from the Fruilmodels site. They are quite good to deal with and the price is reasonable. Alternatively, you can get them from Historex Agents in the UK. I've dealt with them many times and they are fast and efficient (and the exchange rate is good for you at the moment). HTH's. John. http://www.historexagents.com/shop/hxsearchresults.php?SupplierCode=FR http://www.friulmodel.hu/en/products/ Thank you very much for the help, I'll see how it goes me. Best regards John Link to comment Share on other sites More sharing options...
FrancisGL Posted November 1, 2016 Author Share Posted November 1, 2016 Update 04; Hi Pals, today I finished fit all the pieces in place, and have filing all joints in need.Especially the base of the gun, which are two pieces, and I hesitated, for I have seen models finished very well done, but they had a line in the middle of the junction of the pieces. I tested the tracks and now no problema (for now,fingers crossed), I think we're ready for the primer. Soon (i hope..) Thx for watch and comment, cheers mates 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now