DIO Posted August 24, 2017 Share Posted August 24, 2017 1 hour ago, Antoine said: ...for fallacious reasons? What were those reasons? Can't remember having read anything related... Link to comment Share on other sites More sharing options...
Urubu-Rei Posted August 24, 2017 Share Posted August 24, 2017 (edited) Since the need for a new Mirage III was brought up, can anyone say what's wrong with the ones from AML and RV? Edited August 24, 2017 by Urubu-Rei Link to comment Share on other sites More sharing options...
Antoine Posted August 24, 2017 Share Posted August 24, 2017 3 hours ago, DIO said: What were those reasons? Can't remember having read anything related... There was at about the same time two other Super Etendard releases, from KH and Kinetic... Link to comment Share on other sites More sharing options...
Wez Posted August 24, 2017 Share Posted August 24, 2017 1 hour ago, Urubu-Rei said: Since the need for a new Mirage III was brought up, can anyone say what's wrong with the ones from AML and RV? Neither are mainstream kits, both tend to be at the more expensive end of the price range most people would consider paying for a 1/72nd Mirage. Does the former matter? Yes, because I for one, want to make a range of Mirages and want consistency, e.g. repeatable results, not a kit that has to be fettled so much that it every build feels like a chore. Does the latter matter? Yes, absolutely, especially again if you want to make a number of aircraft, however, in the current Mirage Group Build, a number of us are making PJ/HPM versions of the 1/72nd Mirage III/5. It's an expensive kit which is why I'm persisting with mine, but I won't be in a hurry to buy another. I haven't seen an AML kit in years. As for the RV kit, it's covered in unnecessary divots for rivets and is not the easiest of builds, but don't take my word for it, read Graeme's build thread here from the Mirage GB. Modern, mainstream, affordable kits of the Mirage III/5 series are wanted by many. 4 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted August 24, 2017 Share Posted August 24, 2017 Spot on Wez, I too would like to indulge in more than one 1/72 Mirage kit, however every time I get excited about possible projects I start to do the maths and it just fails to add up. I would not call myself a miserable old fool that is not prepared to pay for quality produts, however I think I know where to find value for money and I cannot seem to find this with the current crop of 1/72 Mirages. Therefore - I still believe that there is room for an AMK Mirage family of sorts. If the Kfir has sold out in record time you can only imagine what a good quality and well priced Mirage III would sell like! You only have to look at the number of countries that operated this beautiful aircraft to see what worldwide potential there is. If AMK want to make a quick buck - I'd delay the 1/48 F-14 even further and put all efforts on a Mirage IIIC/E kit before someone else decides too. Cheers... Dave .... By the way - glad to hear your on the mend Martin. 1 Link to comment Share on other sites More sharing options...
TEMPESTMK5 Posted August 24, 2017 Share Posted August 24, 2017 Good morning I would like to suggest AMK to concentrate on Mirage III and 2000 famillies in 1/72 as there are already a lot of F14Tomcat 1/48 kits https://www.scalemates.com/search.php?fkSECTION[]=Kits&q=+F+14+TOMCAT+1%2F48 while there is clearly a shortage of good MIrage III and 2000 in 1/72 .. Best regards Patrice 2 Link to comment Share on other sites More sharing options...
Fanakit Posted August 25, 2017 Share Posted August 25, 2017 A 1/72 Mirage III and 2000 by AMK will be great ! But pending a new Mirage we have plenty of possibilities with this awesome new Kfir ! My Kfir review : http://fanakit.free.fr/analyse/kfir_AMK/kfir_amk.html Ivan Link to comment Share on other sites More sharing options...
JosephLalor Posted August 31, 2017 Share Posted August 31, 2017 On 8/23/2017 at 9:31 PM, Laurent said: I'm a little puzzled. AFAIK the front fuselage (from the pitot to the rear of the canopy) is the same (appart from the eventual Doppler bulge). A plug was inserted behind the cockpit in the IIIE to add an avionic bay. Roughly speaking, on the IIIC, the rear canopy frame ends on the intake duct while in the IIIE it ends near the intake face. I've had another look and the kit's forward fuselage is as you describe Link to comment Share on other sites More sharing options...
Enzo the Magnificent Posted September 13, 2017 Share Posted September 13, 2017 Some concerns have been raised about the dogtooth leading edges on the wing of this kit. The sprue photos show a distinct panel ridge on the uppersurface of the wing behind the dogtooth. It looks quite bad in the pictures. It looks slightly better when you get to see the parts in the flesh plastic. Let me just point aout that once the airframe is assembled and primed with Alclad2 primer, then the parts look perfectly excellent. Nothing to see here. Move along... 1 Link to comment Share on other sites More sharing options...
Laurent Posted September 13, 2017 Share Posted September 13, 2017 17 minutes ago, Enzo Matrix said: Let me just point aout that once the airframe is assembled and primed with Alclad2 primer, then the parts look perfectly excellent. Nothing to see here. Move along... Nope... where's the build ?!?! Link to comment Share on other sites More sharing options...
Enzo the Magnificent Posted September 13, 2017 Share Posted September 13, 2017 16 minutes ago, Laurent said: Nope... where's the build ?!?! I knew someone would ask that. I'll be documenting it in the Mirage GB. Link to comment Share on other sites More sharing options...
Aardvark Posted September 15, 2017 Share Posted September 15, 2017 I have read 10 pages a topic. From topic not it is clear, AMK will make the version IAI C.1 / F-21 "USN/USM"? Yes or no? B.R. Serge Link to comment Share on other sites More sharing options...
luis pacheco Posted September 18, 2017 Share Posted September 18, 2017 Arrived today! I order from SincereHobby and came from Austria. 1 Link to comment Share on other sites More sharing options...
Sanjuro Posted September 18, 2017 Share Posted September 18, 2017 4 hours ago, luis pacheco said: Arrived today! I order from SincereHobby and came from Austria. Check the decals. Those in my kits were misprinted. 1 1 Link to comment Share on other sites More sharing options...
Laurent Posted September 18, 2017 Share Posted September 18, 2017 1 hour ago, Sanjuro said: Check the decals. Those in my kits were misprinted. Thanks for the warning. I've checked my kits. Well one kit will certainly not be israeli and the other will certainly not be ecuadorian. Link to comment Share on other sites More sharing options...
luis pacheco Posted September 18, 2017 Share Posted September 18, 2017 3 hours ago, Sanjuro said: Check the decals. Those in my kits were misprinted. Thanks. I am still undecided between Ecuador and Colombia. The decals looks fine for both versions. The problem are the missiles with damaged fins. Link to comment Share on other sites More sharing options...
Laurent Posted September 19, 2017 Share Posted September 19, 2017 12 hours ago, luis pacheco said: I am still undecided between Ecuador and Colombia. The decals looks fine for both versions. One kit will be israeli, other will be sri-lankan perhaps. First box Second box The problem are the missiles with damaged fins. Same thing on my two kits but it's a non-issue: two LGBs are to be used, not all four. Link to comment Share on other sites More sharing options...
Sanjuro Posted September 19, 2017 Share Posted September 19, 2017 Thank you for showing those pictures. I have the same misprint with my decals, although the blue parts pointing to the opposite direction. Unusable for me. Link to comment Share on other sites More sharing options...
Rabbit Leader Posted September 19, 2017 Share Posted September 19, 2017 The decals and mis-cast missiles are quite disappointing. Their 1/48 Magistrer is honestly faultless, so this is not up there with what AMK has been producing of late. I have only read glowing reports of this company's products so this is the first hiccup that I can see. I do not have this kit, however hardly think that these issues place this kit in the 'unbuildable' category. Anyway - let's hope that these problems are just faults with the first batch run. I'd be very surprised if it's not corrected on the second run. Cheers.. Dave Link to comment Share on other sites More sharing options...
ICMF Posted September 19, 2017 Share Posted September 19, 2017 4 hours ago, Rabbit Leader said: however hardly think that these issues place this kit in the 'unbuildable' category. You are literally the only person who has used that word. Link to comment Share on other sites More sharing options...
Rabbit Leader Posted September 19, 2017 Share Posted September 19, 2017 43 minutes ago, ICMF said: You are literally the only person who has used that word. Technically I haven't!! Let's not add an inference that's not there. I'm actually trying to defend AMK by their excellent past products. Link to comment Share on other sites More sharing options...
Enzo the Magnificent Posted September 19, 2017 Share Posted September 19, 2017 I know it sounds as though I'm saying "I'm alright, Jack!" but my decals and LGBs are perfect! Link to comment Share on other sites More sharing options...
Wez Posted September 19, 2017 Share Posted September 19, 2017 1 hour ago, Enzo Matrix said: I know it sounds as though I'm saying "I'm alright, Jack!" but my decals and LGBs are perfect! You're right, it does! 1 Link to comment Share on other sites More sharing options...
luis pacheco Posted September 19, 2017 Share Posted September 19, 2017 (edited) 8 hours ago, Laurent said: One kit will be israeli, other will be sri-lankan perhaps. First box Second box Same thing on my two kits but it's a non-issue: two LGBs are to be used, not all four. My decals looks Ok. I had more luck. The missiles question are not a big deal but when I buy something I hope it does not come with defects. Edited September 19, 2017 by luis pacheco Link to comment Share on other sites More sharing options...
Sanjuro Posted September 19, 2017 Share Posted September 19, 2017 Same defect here as i just found out No problem for me as i don't put weapons on my models. But the decals..... Can't live with that. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now