drake122 Posted March 15, 2017 Share Posted March 15, 2017 (edited) On 7. 3. 2017 at 5:58 PM, kotey said: This decal include only one BM marking, actually it were first MiG-31BM, which used at PVO retraining center. In 1\48 we have two MiG-31 decals - 48-044 Standard MiG-31s (MiG-31s from first batches to MiG-31B and DZ) and 48-040 Upgraded MiG-31s (MiG-31BM\BSM). Same will be in 1\72 scale - two decals. About MiG-31BMs - in this case we went untraditional way - firstly we made masks for paint names on real MiG-31BMs in Kansk, and only after release model i'm downscaled this file to use in decal. Well, but the kit can be built as a Mig-31B and as far as I can see, that sheet contains a lot of markings for B variants. Speaking of new decal from Begemot, make one for these pretty please: Su-35S deployed in Syria Su-33 deployed in Syria Timur Apakidze memorial - unflyable plane but great for diorama! Edited March 15, 2017 by drake122 2 Link to comment Share on other sites More sharing options...
drake122 Posted March 15, 2017 Share Posted March 15, 2017 On 13. 3. 2017 at 3:56 PM, Violet Club said: What are the mistakes on the scale down 1/72 kit. Could these mistakes be fixed ? All the Best, Violet Club Check these discussions for the mistakes. Not too bad overall, but all of them apply to the 72nd kit, I checked. What it doesn't mention is that there is an ugly seam on both sides of the lower fuselage part all the way through! Best taken care of before assembly. Link to comment Share on other sites More sharing options...
charlie_c67 Posted March 17, 2017 Share Posted March 17, 2017 So how does it compare to the condor/icm one? Link to comment Share on other sites More sharing options...
drake122 Posted March 17, 2017 Share Posted March 17, 2017 15 hours ago, charlie_c67 said: So how does it compare to the condor/icm one? It makes them obsolete? Seriously, I don't think you can compare the two as far as detail and technology goes. Link to comment Share on other sites More sharing options...
drake122 Posted April 19, 2017 Share Posted April 19, 2017 https://www.eduard.com/store/out/media/distributors/leaflet/leaflet2017-06cz.pdf Eduard announces a set of PE and masks for the Mig-31 B/BM kit for June 2017. Link to comment Share on other sites More sharing options...
Homebee Posted April 29, 2017 Author Share Posted April 29, 2017 (edited) Released - ref. 01679 - MiG-31 Source: http://www.trumpeter.cn/index.php?g=home&m=product&a=show&id=2989 V.P. Edited May 1, 2017 by Homebee 1 Link to comment Share on other sites More sharing options...
Billydick Posted May 8, 2017 Share Posted May 8, 2017 Anybody know when this is going to be released in the UK ? Good job I'm not holding my breath on this one BillyD Link to comment Share on other sites More sharing options...
MiG-Mech Posted May 9, 2017 Share Posted May 9, 2017 (edited) When it is released at Trumpeter website it needs 1-2 months to be really released. Edited May 9, 2017 by MiG-Mech 1 Link to comment Share on other sites More sharing options...
Billydick Posted May 9, 2017 Share Posted May 9, 2017 The 31B/BM was released in December 2016 and Eduard have P/E set already available, yet no sign of stocks arriving in UK ... BillyD Link to comment Share on other sites More sharing options...
drake122 Posted May 10, 2017 Share Posted May 10, 2017 17 hours ago, Billydick said: The 31B/BM was released in December 2016 and Eduard have P/E set already available, yet no sign of stocks arriving in UK ... BillyD Actually, the Eduard PE set is coming 1st June 2017. It is not yet available, maybe only preorders through eduard website... 1 Link to comment Share on other sites More sharing options...
chris57 Posted May 10, 2017 Share Posted May 10, 2017 Picked mine up at the club Monday, but haven't checked it out yet. The seller also had the new navalised Su-33, one for next month. Link to comment Share on other sites More sharing options...
Jabba Posted May 10, 2017 Share Posted May 10, 2017 3 hours ago, chris57 said: Picked mine up at the club Monday, but haven't checked it out yet. The seller also had the new navalised Su-33, one for next month. You have had it how long and not looked at it yet! Have you hidden it from SWMBO, or left it at Steve's? 3 Link to comment Share on other sites More sharing options...
chris57 Posted May 10, 2017 Share Posted May 10, 2017 37 minutes ago, Jabba said: You have had it how long and not looked at it yet! Have you hidden it from SWMBO, or left it at Steve's? I've tucked it in the boxes of the one's I'm taking to Gloucester, but it won't be on the table Link to comment Share on other sites More sharing options...
Tbolt Posted August 10, 2017 Share Posted August 10, 2017 (edited) Why do all the model I seem to buy recently have trouble with the clear parts! So I got this kit ( B/BM ) today and had a quick look at it and noticed a molding problem with the rear canopy. Trumpeter have molded some detail on the inside of the canopy and this includes a frame running across the center section, unfortunately it seem they have done some sloppy CAD work ( and not checked the molds! ) as this frame doesn't stop at the ends where it should have and instead it blends out right into part of the canopy that will remain clear! It is on both side. Unfortunately the way the light catches it it will be visible on the finished model. So just be warned if you are going to purchase this kit as it will need sanding and polishing to get rid of it, ( though adding the sealant will help ) which won't be easy because as you can see from the photos, there is a frame with rivets on right by it. Edited August 10, 2017 by Tbolt Link to comment Share on other sites More sharing options...
Homebee Posted October 24, 2017 Author Share Posted October 24, 2017 A in box review in your favourite forum: http://www.britmodeller.com/forums/index.php?/topic/235028292-russian-mig-31-foxhound-172-trumpeter/ V.P. Link to comment Share on other sites More sharing options...
Homebee Posted October 31, 2017 Author Share Posted October 31, 2017 Release of - ref.01681 - MiG-31M kit is expected in late December 2017 Source: http://www.trumpeter.cn/index.php?g=home&m=article&a=show&id=117&l=en V.P. 1 Link to comment Share on other sites More sharing options...
Homebee Posted January 5, 2018 Author Share Posted January 5, 2018 Released - ref.01681 - MiG-31M "Foxhound" Source: http://www.trumpeter.cn/index.php?g=home&m=product&a=show&id=3112&l=en V.P. 3 Link to comment Share on other sites More sharing options...
Homebee Posted March 15, 2018 Author Share Posted March 15, 2018 Armata-Models (link) is to release the brand new Kinzhal (Dagger in English) Hypersonic Missile in 1/48th & 1/72nd scale. Sources: https://www.facebook.com/Armata.Models/posts/1662290973858603 https://tieba.baidu.com/p/5597608166 V.P. 2 Link to comment Share on other sites More sharing options...
drake122 Posted May 30, 2018 Share Posted May 30, 2018 (edited) A friendly warning to anyone who doesn't yet know and is planning to buy these 1:72nd scale Foxhounds from Trumpy, they simply "forgot" to put in the third pieces of main gear bay doors! Shown in the picture below. They are missing from the instructions too. On the 1:48th scale Foxhound, the part numbers for them were G13 and G14. I have the Mig-31BM variant and have to scratch build them (well, more like cannibalize the old Zvezda kit for them). How rude from Trumpeter! P.S. Looking through the pictures from the above Mig-31M variant, they fixed the issue there (parts on sprue G near the horiz. stabilizers). http://scalemodels.ru/modules/photo/viewcat.php?id=9245&cid=292&min=36&orderby=dateA&show=12 Edited May 30, 2018 by drake122 1 Link to comment Share on other sites More sharing options...
MiG-Mech Posted May 31, 2018 Share Posted May 31, 2018 💩 Damn ! Link to comment Share on other sites More sharing options...
drake122 Posted June 18, 2018 Share Posted June 18, 2018 So, building the BM version now I found a few more gross mistakes/omissions... apart from the gear bay doors mentioned above, Trumpy also forgot to include the BM inner wing pylons and the little "antenna" thingy from the spine area. Adding that to the ugly mis-mold on the rear canopy section, I would have to say I am really disappointed and would not buy again. Make no mistake, the fit is generally good and the kit is buildable, but definitely a "half-assed" attempt by Trumpeter. I can't speak for the later version, but only the initial release BM - perhaps they have corrected some of this later on. 1 Link to comment Share on other sites More sharing options...
Tbolt Posted June 19, 2018 Share Posted June 19, 2018 9 hours ago, drake122 said: So, building the BM version now I found a few more gross mistakes/omissions... apart from the gear bay doors mentioned above, Trumpy also forgot to include the BM inner wing pylons and the little "antenna" thingy from the spine area. Adding that to the ugly mis-mold on the rear canopy section, I would have to say I am really disappointed and would not buy again. Make no mistake, the fit is generally good and the kit is buildable, but definitely a "half-assed" attempt by Trumpeter. I can't speak for the later version, but only the initial release BM - perhaps they have corrected some of this later on. Trumpeter, half-assed? I can't believe you are suggesting such thing If it's not on a drawing then it can't be true. 1 Link to comment Share on other sites More sharing options...
drake122 Posted June 19, 2018 Share Posted June 19, 2018 (edited) Perhaps someone more knowledgeable might help me, can the BM version fit the pylons from earlier variants as well? Since the BM inner wing pylon is missing from this kit, but it has the older ones, I was thinking of just using those. As seen in the picture below, the upper 2 BM planes have their specific pylons on, while the lower two non-BM jets have the other ones I was referring to, including the twin launch rails (which again, the kit does not provide... duh). Thanks for the help. My plan was to build "92 blue" - the second one from the top - but I have never seen a picture of it with different pylons. Edited July 11, 2022 by drake122 Link to comment Share on other sites More sharing options...
kotey Posted June 19, 2018 Share Posted June 19, 2018 (edited) BM had connectors under wings for APU-73 missile launcher for R-73 missile. Also i saw at one MiG-31BM APU-170 launchers for R-77 missile, but its not yet serial. Edited June 19, 2018 by kotey 1 Link to comment Share on other sites More sharing options...
drake122 Posted June 19, 2018 Share Posted June 19, 2018 That is exactly my problem, those connector are missing from the kit. So my question was, can the BM use the other pylons older Mig-31 variants had, or is it limited to just having those new ones for R73 and/or R77? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now