Takom German Feldumschaggerat FuG 2.5T. 1:35

[Shar2]

German Feldumschaggerat FuG 2.5T

Takom 1:35

History
In the field the (FUG) is an all-terrain forklift with a max lifting capacity of 2.5tons. Produced by Stein Bock, this field handling equipment was provided by the logistics associations of the Bundeswehr into service in 1983. The main areas of operations for the vehicle, as proposed by the Bundeswehr were the field supply depots. But due to the FUGs excellent all-wheel drive with differential lock and levelling, they have also been used out in the field, helping with the building of secure FOBs. The levelling system allows the vehicle to be used on uneven roads, paths and in light to medium-Heavy terrain. Although generally transported to user areas by truck it is also approved to be driven, with a load along roads at up to 50kph.

The two-man crew, the driver and passenger sit in separate booths. The FUG, can carry a load up to 2.5t and lift it up to 3.7 m in height. In addition to use as a forklift, the forks can be removed and fitted with a snowplough blade for light grading or snow removal or a crane arm with up to 1t load. The vehicle has proved to be very popular in service.

The Model
There doesnt appear to be much in the way of history or details on this vehicle on the interweb other than what I have found above. It certainly is a very unusual kit to bring out, although it will be a useful item to have in a suitable diorama. The kit comes in a very attractive, glossy top opening box, which is quite small, but is full to the brim with seven sprues of dark green styrene, one of clear and five rubber/vinyl tyres. The A5 landscape instruction booklet is nicely laid out, but the use of CAD style diagrams takes a little bit of getting used to even though they are very clear they are not always the easiest to see where each part is fitted.

The build centres around the single piece lower hull, onto which the front axle frame is fitted, followed by the centrally mounted two piece transfer box, plus the front and rear differentials. The front differential is a simple three piece assembly, whilst the rear differential starts of as a simple two piece affair, but is then fitted with the two pivoting ball joints, the steering rack and two hydraulic rams. The two driveshafts are then fitted between the differentials and the transfer box, after which the wheels hubs and brake discs are fitted to the axles.

The two panels that go between the front and rear wheel arches are attached, along with the front differential protective plates are glued into position. The two rear light clusters are each made of three parts and fitted to the rear wheel arches followed by the rear of the large eye panel between them. The outer face of the towing eye panel is then attached along with the towing eye itself. Three protective panels are then fitted over the driveshafts and differential, followed by the right side central panel and the rear mounted spare wheel, which consists of the tyre, plus inner and outer hubs. The remaining four wheels, complete with inner and outer hubs are attached to their respective drive shafts. The whole model can now be turned right side up, so that the topsides can be assembled.

To begin with, you will need to carefully fold the PE storage basket and fit it to the rear left upper wheel arch. Up front, the headlights are assembled from one green styrene part and the clear lens, over which the PE grille is fitted, then glued to the front wheel arches. Three Jerry cans are then assembled, each of three parts and glued to the right side running board. The front end is then kitted out with the fork upright extender strut, a switch/lever beam and a spare set of forks. A two piece footstep is then fitted to the left hand running board, whilst the four piece spare wheel hoist is fitted to the rear bulkhead. In the centre of the vehicle the three piece fork manifold and cover is fixed into position, followed by the rear mounted engine cover and two part air intake.

Each of the crew cabins is made up of four panels into which the clear screens are added along with the windscreen wipers. The rear screens have the option of being posed open with the addition of two gas struts. Each seat is made up of a four piece support frame, two piece back rest, and the single piece squab. The cabins are also fitted with wing mirrors, and handles, plus downward looking periscopes for the front panels whilst only the left hand cabin has the steering wheel and binnacle. The completed cabins are then attached to the front hull, one each side of the fork mechanism. The exhaust is then assembled from eight parts, which includes the PE protective cover.

With the main body of the vehicle complete its onto the fork assembly. Firstly, the uprights are built up from nice parts, to which the elevating frame, made up of eight parts, along with the elevating hydraulic ram are then slid into position. The main fork framework is built up from three parts and fitted with the hydraulic ram, and cover plate. The assembly is then fitted to the front of the main body. The modeller has a choice of fittings to fit to the fork frame, short forks, long forks, each with a five piece suspension bracket, a seven piece hook beam, for crane work. This can be assembled folded and attached to the left hand running board when not in use. Lastly the model can be fitted with a sixteen piece snowplough.

Decals
The small decal sheet has markings for four different vehicles, two in overall green schemes, one in three colour camouflages and one in an overall white UN scheme. The decals are well printed, in good register and a clear enough to read without a magnifier.

Conclusion
This is certainly a bit leftfield, even for a Takom release, as these sorts of vehicles are largely forgotten or have any interest taken in them, as they arent the big frontline vehicles that usually get released. That said, without these vehicles the supply train couldnt work. The choice of the four different fittings is a nice thought. Highly recommended.

Review sample courtesy of
UK Distributors for

[saintsclaire]

Now we need a 1/35 C-130 or C-17

[Panzer Vor!!!]

Hmmm I see one lifting a engine out of a leo ?? Boundless possibilities

Nice one Takom

Good review Dave I must admit i didn't know much about these vehicles

Another one on the list

[tone]

_HI,

_{I have this kit and I am a bit puzzled by the 'GREEN' P/E fret, I thought at first it was a protective cover but it does not seem removable?, it appears to be painted on as a quick scrape with a scalpel reveals the brass underneath ! Bad enough having to remove the item from the fret and then bend it, you now have to scrape the paint off before you can glue it !!.}

_{I just hope this is a mistake.}

[Shar2]

Using superglue or Hypo GS you shouldn't need to remove the paint. I believe the paint on the PE is primer, so that it's ready to paint.

[tone]

HMMM

The plot thickens!.

[Simon1961]

I have this kit, definitely something different. I'm doing mine with the snowplough, it's going into a small diorama with the Takom VW T3 Transporter and whole lot of Scenic Snow.

[Mike]

The "paint" on the PE is likely to be the photo-resist, I think. Looks the same colour as the stuff I've seen before. If that's the case, you can remove it by soaking it in white vinegar overnight, which will also micro-etch the PE and help the paint stick

[Simon1961]

Hi Mike. You're probably right, although it's nothing like the resist I've used when designing and making prototype boards.

I've already dealt with that though, but thanks for the information.

[Mark_1984]

Just got a copy of this kit from Hong Kong. It came in grey plastic and no green coating on the etched fret.

Have to agree whole heartedly with the review. Nice kit, fit is generally good, but the instructions aren't always the easiest to follow. My build is coming on nicely, and the weathering is going to be fun.

There are a couple of good walk-around photo collections on the web if you have a look on Scalemates.