172flogger Posted June 29, 2015 Share Posted June 29, 2015 1/72 Messerschmitt Bf 109 line as part of the Eduard 1/72 revolution Bf 109F-2/F-4/G-2/G-4 versions confirmed - in 3D construction source: http://ipmsnymburk.com/forum/viewtema.php?ID_tema=11559 post 26531) 26.06.2015-13:08 S.199 is confirmed as a future release for later time with the 1/72 MiG-21 line Link to comment Share on other sites More sharing options...
MiG-Mech Posted June 30, 2015 Share Posted June 30, 2015 (edited) Why a 6238356273682315th Bf 109 (G) ? And S.199 ?Both were just published by KP and F shall also come.Why no early 109 ? Like A/B/C/D if a 109 is wanted ? Edited June 30, 2015 by MiG-Mech 1 Link to comment Share on other sites More sharing options...
172flogger Posted June 30, 2015 Author Share Posted June 30, 2015 They need best-seller mainstream kit for cash-flow. These types are needed for funding other projects like MiG-15 UTI or Czechoslovak pride Avia B.534. AZ Model (KP) Bf 109 are very good, maybe best short-run kits. But sorry, Eduard would made top Tamiya-like quality mould. Link to comment Share on other sites More sharing options...
MiG-Mech Posted June 30, 2015 Share Posted June 30, 2015 Okay, I'll buy an F. Link to comment Share on other sites More sharing options...
Duncan B Posted June 30, 2015 Share Posted June 30, 2015 It would be good to see Eduard tackle the jumo engined early 109s as well as the mainstream ones. Lets hope they don't make the engineering of the kits too complicated that it compromises the build quality. Duncan B Link to comment Share on other sites More sharing options...
meisnerr Posted June 30, 2015 Share Posted June 30, 2015 1/48!Due to punctuation in quoted post, the "under construction" list is unclear.IMHO 1/72 = Fw 190A-5/A-8/F-8 | Spitfire Mk.IX/VIII + XVI | Fokker D.VII and Avia B.534 series II & III & Bk.534 Link to comment Share on other sites More sharing options...
172flogger Posted July 5, 2016 Author Share Posted July 5, 2016 source: http://modelforum.cz/viewtopic.php?f=1&t=95280 Project is confirmed for next 2 or 3 years. After 1/72 Spitfire and MiG-21 kits: Kit will be done in same style as their superb 1/72 Spitfire Mk.IX. Rivets are confirmed. Link to comment Share on other sites More sharing options...
stevehnz Posted July 6, 2016 Share Posted July 6, 2016 1/72 Messerschmitt Bf 109 line as part of the Eduard 1/72 revolution Bf 109F-2/F-4/G-2/G-4 versions confirmed - in 3D construction source: http://ipmsnymburk.com/forum/viewtema.php?ID_tema=11559 post 26531) 26.06.2015-13:08 S.199 is confirmed as a future release for later time with the 1/72 MiG-21 line Help, I can't find anything in that thread with that post number or that date. Steve. Link to comment Share on other sites More sharing options...
172flogger Posted July 6, 2016 Author Share Posted July 6, 2016 Sorry Steve, i missed post number in link. It´s this post: http://modelforum.cz/viewtopic.php?f=1&t=95280&p=1897585#p1897585 But google/bing translator will not help You so much. Czech language is hard for machine translators. And my English is bad too. 1 Link to comment Share on other sites More sharing options...
The Good Sergeant Posted July 6, 2016 Share Posted July 6, 2016 Two to three years out is a long time, so I would not assume that Eduard will not eventually do a Bf-109B or C. Patience may indeed be a virtue. Steven Brown Scale Model Soup Link to comment Share on other sites More sharing options...
madcop Posted July 6, 2016 Share Posted July 6, 2016 Why a 6238356273682315th Bf 109 (G) ? And S.199 ? Both were just published by KP and F shall also come. Why no early 109 ? Like A/B/C/D if a 109 is wanted ? Maybe because we need some good scale models of these , not Frankenplanes made by mixing different brands. There aren't any good 109F-Gs (0 to 14) for the moment except for the very nice ZVEZDA 109F and FINE MOLDS F-G-K series models...if you can grab them !( for the Fine Molds !) Even the Fine Molds , Zvezda and the late KPM G-10 and AS seem to have their own shortcomings but who hasn't ? So keep on hoping for the "definite Bf 109F-G-K series " new tools by a main brand like Eduard or Tamiya. As the Eduard 109G-6 saga seems now to belong to the past , let's hope for the best. Just my 2 cents Madcop Link to comment Share on other sites More sharing options...
Homebee Posted October 19, 2023 Share Posted October 19, 2023 (edited) Sources: https://info.eduard.com/cz/10-2023-specia https://www.facebook.com/EduardCompany/posts/pfbid02QAxdmwJVo9o4HVHUso6THebSSMDAMTo6xAnTWQMk5P41KKKdRpX7usiKhESzhNPUll In 2024 - 1/72- Messerschmitt Bf.109G Gustav family - 2024-01 - Gustav Pt.1 - Bf.109G-5 + Bf.109G-6 - Early - 2024-xx - Gustav Pt.2 - Bf.109G-6 Late (high rudder and Erla type cockpit) + Bf.109G-14 - 2024-xx - Gustav Pt.3 - Bf.109G-6/AS + Bf.109G-14/AS - 2024-xx - Gustav Pt.4 - Bf.109G-10 - various versions Release expected in November 2023 - ref. 2143 - Messerschmitt Bf.109G2 & G-4 - Dual Combo - Wundershöne neue Maschinen Quote BEAUTIFUL NEW MACHINES pt. 2 DUAL COMBO 1/72 Upcoming new November release. 1/72 scale Limited edition kit of German WWII fighter aircraft Bf 109G (cat. no. 2143). The kit is focused on aircraft in G-2 and G-4 versions. Wide choice of 14 marking options covers all WWII fronts where these “Gustavs” were fighting, including airplanes from the Ilmavoimat (Finish Air Force), Italian Regia Aeronautica and 13. (slowakische)/JG 52. Box-art: illustration by Marek Ryś, design Kateřina Borecká (the badge shown on the boxart is not part of the kit). Source: https://www.facebook.com/EduardCompany/posts/pfbid02Lo9WiFytkTno4PJUVs22bscCsYyakK8DZoyk3N9E8RTQR7CjjB6Ge1RPoMWY8ksTl Quote A small look back at the preparation of the Bf 109G-2/G-4 kit in 1/72nd scale, which will be released in November 2023 under catalogue number 2143 in the Limited edition as Dual Combo. This is the first time since the late 1970s that this 1/72nd scale version of the Gustav has been marketed as a kit from a metal mould. V.P. Edited October 21, 2023 by Homebee 3 Link to comment Share on other sites More sharing options...
Homebee Posted October 21, 2023 Share Posted October 21, 2023 (edited) Released - ref. 2143 - Messerschmitt Bf.109G2 & G-4 - Dual Combo - Wundershöne neue Maschinen Source: https://www.mn-modelar.cz/172-wundersch-ne-neue-maschinen-pt-2-dual-combo-123928 Source: https://www.facebook.com/EduardCompany/posts/pfbid0ERFfBoxHxMKgQxVE8FhauwEHtL4fcLArEpri45N3JHhCJPG8hTq7fy2jnQJ4WoKel Quote BEAUTIFUL NEW MACHINES pt. 2 DUAL COMBO 1/72 Upcoming new November release. 1/72 scale Limited edition kit of German WWII fighter aircraft Bf 109G (cat. no. 2143). The kit is focused on aircraft in G-2 and G-4 versions. Wide choice of 14 marking options covers all WWII fronts where these “Gustavs” were fighting, including airplanes from the Ilmavoimat (Finish Air Force), Italian Regia Aeronautica and 13. (slowakische)/JG 52. Test build Source: https://www.facebook.com/EduardCompany/posts/pfbid0ok4Tb9r9q9h1RBZHrEBfWgP2Rk2K5XvZQ34isS16jRLwWAC5C97h1DFVD95tuGGpl V.P. Edited November 1, 2023 by Homebee 5 2 Link to comment Share on other sites More sharing options...
TheKinksFan Posted October 22, 2023 Share Posted October 22, 2023 (edited) All Eduard product are -20% on Mn-Modelar.com. Wunderschöne Neue Maschinen Part 2 and Part 1 cost 23,84€. Edited October 22, 2023 by TheKinksFan Link to comment Share on other sites More sharing options...
Fin Posted October 22, 2023 Share Posted October 22, 2023 Do these limited edition dual kits come with canopy masks too or just plastic and decals? Link to comment Share on other sites More sharing options...
Hook Posted October 22, 2023 Share Posted October 22, 2023 11 minutes ago, Fin said: Do these limited edition dual kits come with canopy masks too or just plastic and decals? Masks and etch. Cheers, Andre 1 Link to comment Share on other sites More sharing options...
Fin Posted October 22, 2023 Share Posted October 22, 2023 23 minutes ago, Hook said: Masks and etch. Cheers, Andre Seriously?! That would be very good value. Link to comment Share on other sites More sharing options...
Piotr Mikolajski Posted October 22, 2023 Share Posted October 22, 2023 11 minutes ago, Fin said: Seriously?! That would be very good value. Basically all Dual Combo kits are two ProfiPack kits in one box with better price and usually with more markings options. 1 Link to comment Share on other sites More sharing options...
senux Posted October 22, 2023 Share Posted October 22, 2023 (edited) 57 minutes ago, Fin said: Seriously?! That would be very good value. You may see it here Edited October 22, 2023 by senux 1 Link to comment Share on other sites More sharing options...
Fin Posted October 22, 2023 Share Posted October 22, 2023 Thank you very much, guys! I’ve ordered it. 3 Link to comment Share on other sites More sharing options...
Tbolt Posted October 22, 2023 Share Posted October 22, 2023 Looks nice, but why do Eduard keep on moulding pitot probes as part of the wing? Link to comment Share on other sites More sharing options...
Piotr Mikolajski Posted October 22, 2023 Share Posted October 22, 2023 3 hours ago, Tbolt said: Looks nice, but why do Eduard keep on moulding pitot probes as part of the wing? Like any manufacturer, Eduard has to decide whether to give it together or separately. For some modellers it makes building more enjoyable, for others the opposite. There is no good solution here, there will always be some modellers who are not satisfied. 1 Link to comment Share on other sites More sharing options...
109 fan Posted October 23, 2023 Share Posted October 23, 2023 Actually, there is a good solution. Eduard gives you both choices. They give you a pitot tube molded on the wing top and two replacements as separate parts. They also give you two extra aileron mass balances, two extra clear wingtip lights and an extra clear gun sight. All of which will placate the carpet monsters. 6 2 Link to comment Share on other sites More sharing options...
Hook Posted October 23, 2023 Share Posted October 23, 2023 5 hours ago, 109 fan said: All of which will placate the carpet monsters. Plus, you can fit the spare aileron balances to your Zvezda 109F's. Cheers, Andre Link to comment Share on other sites More sharing options...
TheKinksFan Posted October 23, 2023 Share Posted October 23, 2023 Eduard has released a set of 1/72 3D printed balance weights, Eduard 672329 https://www.eduard.com/eduard/brassin/aircraft/1-72/bf-109-balance-weights-print-1-72.html Yesterday I lost one of Ar 196's kit parts, I wonder if Bf 109 and Ar 196 balance weights are approximately the same shape and size. It's hard to tell from photos. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now