kpnuts Posted June 19, 2015 Share Posted June 19, 2015 Hi all when I had mine I totally rebuilt it and whilst i was at it i stripped all the paint off the engine casings polished it and engraved it, so I thought I would do the same with this kit. being 1/8 of the original size it obviously wont be as elaborate but will give the general idea. roughly pened on this is the tool of choice oops didnt work too well I think my next attempt will be heated scribe . Link to comment Share on other sites More sharing options...
injidup Posted June 24, 2015 Share Posted June 24, 2015 Any pics of your CB750, Mr Nuts? Link to comment Share on other sites More sharing options...
kpnuts Posted June 24, 2015 Author Share Posted June 24, 2015 Sorry one of my greatest regrets ,I did have some but over the years they've got lost. Link to comment Share on other sites More sharing options...
kpnuts Posted June 25, 2015 Author Share Posted June 25, 2015 Hi all well i've made a start proper on this, I have decided to do the very best I can on this kit, as it is my favorite bike of all time 3 Link to comment Share on other sites More sharing options...
kpnuts Posted June 28, 2015 Author Share Posted June 28, 2015 Well I am totally peed off this was advertised as new and unstarted. Someone has gone ahead on the instructions and started the frame, only they've glued it all wrong (and used plenty of it) I've tried getting it apart but it's like it's welded together, and even if I get it apart I'm not sure I can reposition it where it should be, so this is another one that's on hold, funny its another Heller kit. Link to comment Share on other sites More sharing options...
kpnuts Posted July 2, 2015 Author Share Posted July 2, 2015 HI all well here are some pics of the bodged up frame (Most of it is under the tank so wont notice), lots of cleaning up to do, thanks to help from my nephew. 1 Link to comment Share on other sites More sharing options...
kpnuts Posted July 4, 2015 Author Share Posted July 4, 2015 Hi all here is a small update on this 1 Link to comment Share on other sites More sharing options...
imster Posted July 5, 2015 Share Posted July 5, 2015 good save on that frame mate!! this build is looking good Link to comment Share on other sites More sharing options...
kpnuts Posted August 12, 2015 Author Share Posted August 12, 2015 hi all well back on this again, I've decided not to engrave the engine as I cant find a way of doing it that I like. 2 Link to comment Share on other sites More sharing options...
kpnuts Posted September 30, 2015 Author Share Posted September 30, 2015 Back on this one again. 1 Link to comment Share on other sites More sharing options...
Natter Posted October 5, 2015 Share Posted October 5, 2015 Good to see you're working on the Honda again. Link to comment Share on other sites More sharing options...
kpnuts Posted October 9, 2015 Author Share Posted October 9, 2015 Hi all well here is an update (the tank and side panels are just a mock up not fixed yet) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now