Oddball Posted June 16, 2014 Share Posted June 16, 2014 (edited) Okay, finally got my tins of Revell enamels in the post, so it's now time to do some comparison tests. I'm going to be opening up the tins and giving you a look at how they look, my first impressions etc. I'll then try them out on a couple of different pieces of scrap plastic, following my usual methods, and we shall see how they perform. In the silver corner we have three tins of Humbrol: 56 Aluminium, 191 Chrome Silver, and 27002 Polished Alu MetalCote, my up until recently go to for any detail and small scale metallic painting. And in the...uhm...other silver corner, we have the Revell: 90 Silver, 91 Steel and 99 Aluminium. I'm going to be looking at initial quality/consistency, how well they cover and how many coats it takes to get a good finish, plus drying times. And I'm sure I'll come up with a few more tests too. Pointless you may be thinking? Well, if you are like me and use enamels for detailing due to their excellent suitability for brushing and drybrushing, then you may be aware that Humbrol haven't exactly been wowing the masses lately with their new run of paints. It used to be that Revell were seen as the scruffy cousin, but recently many people have been comparing them favorably to Humbrol, and even going so far as to say they are better. Well, we shall see. Odd. Edited June 16, 2014 by Oddball Link to comment Share on other sites More sharing options...
Black Knight Posted June 16, 2014 Share Posted June 16, 2014 Humbrol 56 is 'Aluminium' not 'Steel' Link to comment Share on other sites More sharing options...
Oddball Posted June 16, 2014 Author Share Posted June 16, 2014 Whoops, that's what I meant. Bit of a misspell there, thanks for pointing it out. Odd. Link to comment Share on other sites More sharing options...
Oddball Posted June 17, 2014 Author Share Posted June 17, 2014 Righty ho, I took the liberty of opening up the jars this morning. All the jars are unopened, no stirring or shaking has been done. First off were the Humbrol contenders. Please note that these are all brand new tins, yet there seems to be small amounts of spillage on each one. Now the lids, while being secure, are raised higher than they used to be, I used the thick end of a pair of tweezers to open them and they came open very easily, almost too easily. This makes me wonder if the spillage is from filling, or if it's paint seeping out. The apparently poorer seal than before might also account for the numerous reports of paint going off in the tins. The consistency is slightly different in each one swirly for the MetalCote and a strange blotchy look for the 56, and out of the three the 191 seems to be the least well mixed, there's very little pigment floating in the carrier liquid. Other than that, the other two seem to look about standard for an undisturbed tin. Next, onto the Revell. I'll tackle the lids first, which is exactly what I spent 5 minutes doing. They are sunk down good and tight, much more like the Humbrol tins used to be. I had to drag out a small screwdriver to even get in underneath them. Unfortunately the lids are made of a pretty soft metal, as a result they got pretty chewed up in the struggle. Don't fret though, when it came to closing them up again, each one popped (and I do mean popped) closed with a very tight seal. Overall the consistency between them is very uniform, with what looks to be the same amount of pigment floating around in each one. Preliminary findings, well, not much difference between the two but I'd say Revell is slightly in the lead at this point due to the superior sealing of the lids and the uniform consistency. Time to do some stirring and shaking, and then it'll be time to do some hairy sticking! Odd. Link to comment Share on other sites More sharing options...
Black Knight Posted June 17, 2014 Share Posted June 17, 2014 It looks like you'll be comparing old Chinese made Humbrol paint rather than the new stock. Link to comment Share on other sites More sharing options...
Oddball Posted June 17, 2014 Author Share Posted June 17, 2014 Nope, these tins are the new UK manufactured ones. Union Jack proudly displayed on the back (they were also putting the new UK paint in the old tins for about 9 months before these new ones came out) and they came from models for sale, their turnover must be enough to have weeded out most, if not all of the Chinese rubbish by now. Odd. Link to comment Share on other sites More sharing options...
Black Knight Posted June 17, 2014 Share Posted June 17, 2014 Sorry, I didn't see the Union flag on the tins. Link to comment Share on other sites More sharing options...
Merlin Posted May 2, 2017 Share Posted May 2, 2017 So how did they paint out, what did they look like etc etc ? As I am wondering what to represent steel with, the outcome of this thread is vital,. Merlin Link to comment Share on other sites More sharing options...
sapperastro Posted May 5, 2017 Share Posted May 5, 2017 (edited) Get some colourcoats or mail order some tamiya enamel. But if you simply must use something here, use the Revell (or Revell aqua which has excellent metallics) as the Humbrol is rubbish these days. Edited May 5, 2017 by sapperastro Extra Link to comment Share on other sites More sharing options...
Ventura11 Posted May 6, 2017 Share Posted May 6, 2017 On 05/05/2017 at 11:00 AM, sapperastro said: Get some colourcoats or mail order some tamiya enamel. But if you simply must use something here, use the Revell (or Revell aqua which has excellent metallics) as the Humbrol is rubbish these days. Hi Merlin, I agree with Sapperastro, Revell aqua metallics are excellent, after some attempts with other brands now I am happy at using them. If Revells are easily available they may be very good alternatives. My experience is based only on brush painting. I use distilled water and few drops of flow improver to thin Revell Aqua, the resukts for me are good as painted surfaces have a smooth finish without brush marks. Paolo Sorry I mean results not resukts Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now