Shar2 Posted April 13, 2014 Share Posted April 13, 2014 Russian T-90 MBT with Cast Turret 1:35 Detail Set, ET Models Trumpeter has released a number of different versions of their T-90 but this new set from ET Models is for theT-90 with cast turret. The set comes packaged in their standard poly sleeve with card header, with six of the large sheets of relief etched brass taped to individual black card, and with the smaller sheets held within smaller zip lock bags. This set also includes six replacement resin smoke discharger tubes, resin aerial base and a length of copper wire. As is usual with these types of add-ons the kit needs to be modified to accept the brass replacements. This means the removal of all the straps, handles, catches, and other moulded fittings, and is best done before the build proper is started. With the kit parts prepped, it’s on with the fiddly task of assembling the numerous straps and buckles, of which there are nine different types. With the straps done it’s on the main hull and the fitting of the various angle beams, glacis plate upright, mounting plates, mudguard fixings, hinges, for which the modeller is required to provide 0.3mm rod. The two fuel drums attached to the rear are provided with new supports and straps, along with other items attached to the rear of the vehicle. Each engine deck grille has a new mesh cover fitted and there are loads of smaller items such as hooks, hinged panels right down to the wingnut fasteners for the headlamp housings. The turret is fitted out with new catches for the external lockers, new supports and spare machine gun ammunition cases, new surrounds and shields for the various sensors and sights. The machine gun also receives new sights, whilst the main gun barrel is fitted with new ultra detailed straps and strengthening rods. The resin aerial base is fitted on top of several fixing rings and each of the kit smoke launchers are replaced by the more typical resin units provided in this set. Conclusion The Trumpeter T-90 is already a really nice kit and these enhancements will really truly be the icing on the cake. Be prepared for some fine bending and fiddly fitting, as a lot of the parts in the set are very small. You will need some sort of ocular enhancement and a pair of very fine tweezers or a suitable picking up tool. Highly recommend. Review Sample courtesy of Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now