jacksdad Posted February 1, 2012 Share Posted February 1, 2012 (edited) Here are some pictures of my first entry for the GB. I will be using the Airfix 1/24 kit as a base and converting it to an A-8/R8 Sturmbock. The markings will be a mixture of kit decals and masks for the individual codes and script. Here is the box shot and contents. Here are the decals that come with the kit. Waldron seat belts. Here are some pictures showing the main kit parts. Detail is very good and for an old kit it still looks the parts. (this will be my 4th Airfix 1/24 FW190) Here is a picture of the kit cowl and the one I'll be using, which is from the Trumpeter 1/24 190D. This will give me the bulge that I need for an A-8. This is a selection of the reference books I'll be using. And finally some pictures of the aircraft I'll be doing. Roll on the weekend, so that I can get started. Steve Edited February 18, 2012 by jacksdad64 Link to comment Share on other sites More sharing options...
kev67 Posted February 1, 2012 Share Posted February 1, 2012 Looks good, was there issues with fit on this 1/24 scale model, if I remember I'm sure I read somewhere about it Link to comment Share on other sites More sharing options...
rowmk9 Posted February 1, 2012 Share Posted February 1, 2012 Looking forward to this one Steve, I've said it before but I'll say it again, I love that paint scheme on Lixfeld's aircraft. Link to comment Share on other sites More sharing options...
jacksdad Posted February 1, 2012 Author Share Posted February 1, 2012 Looks good, was there issues with fit on this 1/24 scale model, if I remember I'm sure I read somewhere about it Don't know. I've built three and not had a major problem yet. Considering the kit is about 30 years old it's not bad. Link to comment Share on other sites More sharing options...
Radleigh Posted February 1, 2012 Share Posted February 1, 2012 I have one of these but its a long way of getting started! Can't wait to see this progress. Link to comment Share on other sites More sharing options...
JohnT Posted February 1, 2012 Share Posted February 1, 2012 Go for it Steve !!! Seriously, I am very much looking forward to watching and learning Might stop me making a total mess of mine Link to comment Share on other sites More sharing options...
carlstavros Posted February 1, 2012 Share Posted February 1, 2012 I recognise this one! I'm looking forward to seeing how this builds up. Nice choice of livery by the way! Cheers, Carl. Link to comment Share on other sites More sharing options...
mick Posted February 1, 2012 Share Posted February 1, 2012 nice choice Link to comment Share on other sites More sharing options...
jacksdad Posted February 4, 2012 Author Share Posted February 4, 2012 (edited) And we're off! Today I will be concentrating on getting the main parts off the sprues and tidied up prior to assembly. I am not going to add any detail to the engine as it will be buttoned up. Over the coming days I hope to get the cockpit done as well as the fuselage halves together. I think the main work is going to be the new bulged gun cowl, a decent looking cockpit, slightly altered outer wing gun area, side armour and detail up the u/c legs. Then I can concentrate on the paint job. The damaged paint work will be done by spraying on silver, masking with Maskol using a piece of Scotchbrite and a cocktail stick, spraying the main colours, removing said masking and hopefully end up with a decent result. Well, thats the plan. I will be using Mal's Miracle Masks for the first time for the markings, so I let you see how I get on with them. My aim is to get this done by the end of February to give me time to have a go at the Mistel. T.T.F.N. Steve Edited February 4, 2012 by jacksdad64 Link to comment Share on other sites More sharing options...
Deacon Posted February 5, 2012 Share Posted February 5, 2012 Lots of reference material there! Looking forward to your next update. Deacon Link to comment Share on other sites More sharing options...
tank152 Posted February 5, 2012 Share Posted February 5, 2012 You've chosen a nice scheme, it'll look impressive in 1/24. Link to comment Share on other sites More sharing options...
jacksdad Posted February 6, 2012 Author Share Posted February 6, 2012 Thanks for the comments guys. Very little progress at the moment. Just taking stuff off the sprues, glueing the engine bits together. Hopefully I'll post some pics later in the week when there is something interesting to show you. Steve p.s. I've heard that the masks for the markings are being posted, so I'll show you them once they arrive. Link to comment Share on other sites More sharing options...
jacksdad Posted February 11, 2012 Author Share Posted February 11, 2012 Ok, here are a couple of pics of the progress, so far. I have attached the two fuselage halves together, after attaching the tail wheel leg. This allows me to get a good tidy seam and everything just slots in from the front. I've made up the cockpit tub and the two banks of cylinders. I'm not going to spend to much time on these. The engine is not going to be to visible apart from the front. As for the cockpit, it's not to bad as per kit. Just needs a decent paint job and a set of belts. Although, when I get round to doing the seat I will be thinning the back of it and using wire torepresent the locating brackets for the shoulder belts. Here you can see where I have drilled out the flare tube. These are the armour panels to go onto the sides of the cockpit. They will be attached before I mark the panel lines although I have sanded the bevel on the sides. There are a couple of sink mark at the tail area that need fixing. I have since attached the armour panels and I'm away to do some paint work on the cockpit panels. Till next time. Steve Link to comment Share on other sites More sharing options...
mick Posted February 11, 2012 Share Posted February 11, 2012 good progress, cockpit looks quite good for thirty years old Link to comment Share on other sites More sharing options...
jacksdad Posted February 11, 2012 Author Share Posted February 11, 2012 good progress, cockpit looks quite good for thirty years old I agree. Airfix certainly did their homework with this one. Steve Link to comment Share on other sites More sharing options...
Arniec Posted February 11, 2012 Share Posted February 11, 2012 Looking good so far. Keep up the good work. I have made more of the 1/24 kits from Airfix and they all are quit good for their age. I duild the Ju 78 2 years ago for a Battle of Britain project and it was lovely. Link to comment Share on other sites More sharing options...
jacksdad Posted February 12, 2012 Author Share Posted February 12, 2012 Here is a couple of pictures of what I managed yesterday. Starboard armour panel attached. I still have to scribe the panel lines. Early panels had four sections, but later ones had only three. Couple of shots of the cockpit. Sorry they are not very clear, but I forgot to take some pictures before I attached it to the fuselage. I will be drilling open the hand holes on the cowl. Here I have drilled the holes for the attachment hooks for the shoulder straps. Next jobs are, start on the u/c bay - there are a few things missing from here that I will do with card. Outer Mk108's - the lower access panel needs a long bulge and there is a small rectangular hole next to the inner edge. You'll see what I mean when I post pictures. Scribe fuselage panels - There are a couple of panels to be scribed on the starboard side just below the cockpit. Attach engine - I will be adding some wiring at the front of the engine before I paint it and glue it in place Complete the fuselage gun cowl. - I need to finish off the panel before attaching it to the fuselage. Hopefully I will add some more pictures later in the week once these jobs have been done. I am getting into the groove with this kit so I should manage to get quite a lot done over the next week. I was a bit concerned about the time I will have to get this done and have a go at the 1/32 Mistel S3C but it looks like I may just manage it. But time will tell. T.T.F.N. Steve 1 Link to comment Share on other sites More sharing options...
Touvdal Posted February 12, 2012 Share Posted February 12, 2012 Nice choice of scheme and unit, always love the "sturmböcke" of JG 300, and Lixfeld a/c is very worn. cheers Jes Link to comment Share on other sites More sharing options...
jacksdad Posted February 12, 2012 Author Share Posted February 12, 2012 and Lixfeld a/c is very worn. Yes, his Muschi is very battered. Steve p.s. I take it you know what Muschi means? p.p.s. Think lady garden. Link to comment Share on other sites More sharing options...
tank152 Posted February 12, 2012 Share Posted February 12, 2012 I take it the side armour panels were scratched out of sheet? It slowly taking shape. All that chipping cries out for the hairspray method, haven't you thought about giving that a try? Link to comment Share on other sites More sharing options...
jacksdad Posted February 12, 2012 Author Share Posted February 12, 2012 (edited) I take it the side armour panels were scratched out of sheet? It slowly taking shape. All that chipping cries out for the hairspray method, haven't you thought about giving that a try? Yes, the panels were made out of 0.25 thick card which was bevelled at the outer edges. Not tried the hairspray method but I think it would be to random. There is some major paint removal that is well photographed so it will need to be a bit more precise. My thoughts are to use Bare Metal Foil on the areas being chipped. Then using a cocktail stick, Scotchbrite and Maskol I will mask off the areas I want the metal to show through. This will then be primed and the masking done again but more carefully. Then I can spray on the camo colours and by removing the, twice applied, Maskol I will hopefully end up with a mixture of chips through to the primer and some right through to the metal. Well, that's the plan, which sounds good in theory. Edited February 12, 2012 by jacksdad64 Link to comment Share on other sites More sharing options...
tank152 Posted February 12, 2012 Share Posted February 12, 2012 Yes, the panels were made out of 0.25 thick card which was bevelled at the outer edges.Not tried the hairspray method but I think it would be to random. There is some major paint removal that is well photographed so it will need to be a bit more precise. My thoughts are to use Bare Metal Foil on the areas being chipped. Then using a cocktail stick, Scotchbrite and Maskol I will mask off the areas I want the metal to show through. This will then be primed and the masking done again but more carefully. Then I can spray on the camo colours and by removing the, twice applied, Maskol I will hopefully end up with a mixture of chips through to the primer and some right through to the metal. Well, that's the plan, which sounds good in theory. The best thing about the method is that its not random! Give it a try on some scrap, you'll be surprised. Link to comment Share on other sites More sharing options...
Touvdal Posted February 12, 2012 Share Posted February 12, 2012 Here you can see my "muschi" , 1/72 hasegawa cheers Jes 1 Link to comment Share on other sites More sharing options...
jacksdad Posted February 12, 2012 Author Share Posted February 12, 2012 That's a lovely Muschi you have, Jes. Link to comment Share on other sites More sharing options...
FalkeEins Posted February 12, 2012 Share Posted February 12, 2012 yes indeed nice... good luck with your build Steve ! ..got a couple of these part started and the Rutman Sturmbock set. Just need a remedy for the engine/cowl/cooling fan fit problem Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now