Search the Community

Rocket Launchers and Dual Ejectors Videoaviation 1:32 Along with the bomb sets reviewed HERE, we have received three more sets from Videoaviation, to sets contain rocket launchers, the LAU-3 and the LAU-31, whilst the third contains dual ejector racks for the F-104. As with the other sets, these are moulded in creamy beige resin, with no sign of imperfections or pin holes/bubbles and protected in the sturdy plastic box and bubble wrap. Dual Ejector Racks (153132) This set contains two dual ejector racks, as used by the F-104 Starfighter. The two racks are very easy to use, just fit the two separate crutch plates, or sway braces as they are called in the instructions, to the top side of each rack, fit you chosen store to each of the ejector racks, then attach to your Starfighter. Nothing could be simpler. LAU-3 Rocket Launcher (153432) This set contains two launcher pods with separate front and rear ends which depict the launcher as loaded. You will need a sharp scalpel blade to remove the moulding block from each launcher, and the end pieces from their moulding sheet, followed by a quick bit of sanding to clean the parts up. The ends are then glued into position and fitted to whichever model you choose. The small decal sheet only carries three different stencils per launcher, and a pair of remove before flight flags. The instruction sheet does give Gunze paint codes and the dimensions of the alluminium strip at each end. LAU-32 Rocket Launcher (153532) This launcher is slightly longer than the LAU-3 and comes with the nose cap moulded in place, so it’s just a matter of removeing the moulding block from the launcher body and the tail piece, giving both a quick bit of fettling, before gluing the end to the body. These launchers were simply painted, with the body white and the ends in black, decals are provided for the stencils as with the LAU-3 set, as well as a pair of remove before flight flags. Conclusion Videoaviation have given us three more very useful sets for the large scale modeller. Suitable for any 1:32 F-104, they are probably better suited for the newish Italeri kit, the dual ejector racks will certainly give the finished model a different look. The rocket launchers can be fitted to a multitude of US aircraft, just check you references to check where they were mounted on which aircraft, although you may need to buy more than one set to fit out a pair of TER’s. Very highly recommended. Review sample courtesy of