Jump to content

Search the Community

Showing results for tags 'airliners'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Calendars

  • Community Calendar
  • Group Builds
  • Model Show Calendar

Forums

  • Forum Functionality & Forum Software Help and Support
    • FAQs
    • Help & Support for Forum Issues
    • New Members
  • Aircraft Modelling
    • Military Aircraft Modelling Discussion by Era
    • Civil Aircraft Modelling Discussion by Era
    • Work in Progress - Aircraft
    • Ready for Inspection - Aircraft
    • Aircraft Related Subjects
  • AFV Modelling (armour, military vehicles & artillery)
    • Armour Discussion by Era
    • Work in Progress - Armour
    • Ready for Inspection - Armour
    • Armour Related Subjects
    • large Scale AFVs (1:16 and above)
  • Maritime Modelling (Ships and subs)
    • Maritime Discussion by era
    • Work in Progress - Maritime
    • Ready for Inspection - Maritime
  • Vehicle Modelling (non-military)
    • Vehicle Discussion
    • Work In Progress - Vehicles
    • Ready For Inspection - Vehicles
  • Science Fiction & RealSpace
    • Science Fiction Discussion
    • RealSpace Discussion
    • Work In Progress - SF & RealSpace
    • Ready for Inspection - SF & RealSpace
  • Figure Modelling
    • Figure Discussion
    • Figure Work In Progress
    • Figure Ready for Inspection
  • Dioramas, Vignettes & Scenery
    • Diorama Chat
    • Work In Progress - Dioramas
    • Ready For Inspection - Dioramas
  • Reviews, News & Walkarounds
    • Reviews
    • Current News
    • Build Articles
    • Tips & Tricks
    • Walkarounds
  • Modelling using 3D Printing
    • 3D Printing Basics
    • 3D Printing Chat
    • 3D Makerspace
  • Modelling
    • Group Builds
    • The Rumourmonger
    • Manufacturer News
    • Other Modelling Genres
    • Britmodeller Yearbooks
    • Tools & Tips
  • General Discussion
    • Chat
    • Shows
    • Photography
    • Members' Wishlists
  • Shops, manufacturers & vendors
    • Aerocraft Models
    • Air-craft.net
    • Amarket Model
    • A.M.U.R. Reaver
    • Atlantic Models
    • Beacon Models
    • BlackMike Models
    • Bring-It!
    • Copper State Models
    • Freightdog Models
    • Hannants
    • fantasy Printshop
    • Fonthill Media
    • HMH Publications
    • Hobby Paint'n'Stuff
    • Hypersonic Models
    • Iliad Design
    • Hobby Colours & Accessories
    • KLP Publishing
    • L'Arsenal 2.0
    • Kingkit
    • MikroMir
    • Model Designs
    • Modellingtools.co.uk
    • Maketar Paint Masks
    • Marmaduke Press Decals
    • Parkes682Decals
    • Paulus Victor Decals
    • Red Roo Models
    • RES/KIT
    • Sovereign Hobbies
    • Special Hobby
    • Test Valley Models
    • Tiger Hobbies
    • Ultimate Modelling Products
    • Videoaviation Italy
    • Wingleader Publications
  • Archive
    • 2007 Group Builds
    • 2008 Group Builds
    • 2009 Group Builds
    • 2010 Group Builds
    • 2011 Group Builds
    • 2012 Group Builds
    • 2013 Group Builds

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. Lockheed L-1011 Tristar 200, with 26 Decals 'Gulf Air' . 1:144 Eastern Express, sold by 26 Models with their decals. The Lockheed Tristar was one of the first generation of widebody airliners, designed in the 1960's and entering service in the 1972, few, if any are still flying today. Like the DC-10 it featured a centre engine mounted in the tail. With the development of more powerful and reliable engines, this configuration is no longer seen on aircraft of similar size. The Gulf Air scheme from the Tristar era is one of the most attractive around, so when I saw that 26 Models were offering their own boxing of the Eastern Express kit along with a set of their own decals, I just had to have one. The price was very good too, so I hope Ray reissues it sometime soon. The kit itself is pretty good. Other forums have suggested it is based on the long unavailable Otaki kit, but not having an Otaki for comparison, I couldn't say. The fuselage halves are in 2 parts, but the fit of the tail section to the main body is exceptional if not perfect. It really is hard to tell that the tail/centre engine is joined on. The rest of the kit fits pretty well too, unlike in comments made on this forum about the Eastern Express MD-11. I have not started my MD-11, but guys building the it have had fit issues, so it is worth pointing out here that the Tristar is a good 'un. There are a couple of improvements that can be made, pointed out at the end of this post. Two versions of the livery are offered on the 26 sheet, with minor variations in the tiles/font used for the 'Gulf Air' and 'Golden Falcon' scripts. Some aircraft had overall white fuselages (on delivery I think) and later they appeared with a bare metal strip along the underside. I did mine as A40-TZ as there is a good photo of it on airliners.net showing the full white fuselage. 'With something else', an A330-200, showing how big twin engined airliners have got! A couple of things are worth doing. The centre engine is a bit 'see through' so I stuck a simple roll of 5 thou plasticard in to give the illusion of an intake. Fellow member Chris 'Stringbag' has artfull bent some copper plumbing pipe for his. I have a copy that I'll use on my next Tristar. The engine pylons are a bit strange where they should meet the hot section. There is a gap that I filled with plastic strip & milliput to blend them in. Thanks for looking, John
  2. BAC 1-11,Scandinavian Airline System (SAS) 1:144 Airfix, with classic-airlines.com decals. In 1968 SAS leased a BAC 1-11 from British Eagle, which was painted in full SAS colours, but retained it's British Registration (G-ATPL). I believe the reason for the lease was to alleviate aircraft shortages pending the arrival of their DC-9's. I rather like the old Airfix kit, but it represents the 1-11 prototype more than a production machine. However a few simple modifications make it look a lot better, see the end of this post. Having spotted this decal sheet on classic-airlines website, I thought it would make an interesting model, as not may people know SAS operated the 1-11. G-ATPL went on to serve with Dan-Air after the collapse of British Eagle 'With something else', a sister 1-11 in British Eagle colours, also an Airfix kit with classic-airlines decals. And with part of my growing SAAS fleet. If you have one of these kits in the stash, it is well worth building. These are the basic mods I did; Thanks for looking, John
  3. A journey of one thousand miles begins with a single step... I began modelling airliners back in 2006, and ever since have wanted to build one of my favorite designs: the MD-11. I have seen the Welsh kit, but didn't want to deal with vacuform. I have seen the authentic airliners kit, but didn't want to deal with resin. I have seen the DC-10 conversions, but didn't want to deal with essentially scratch-building the whole model. Today, though, today I received this: You're probably familiar with the kit by now... This is the Eastern Express/MikroMir MD-11 in the "American Airlines" packaging. Feel free to ignore the Atlantis sticker covering the original MikroMir logo. This packaging includes decals and masks for the Varig MD-11 shown on the box art, as well as a TAM and a World Cargo option. I am planning to build the Varig MD-11, though that will depend heavily on the quality of the kit decals. Anyway, on to the build... The fuselage comes in five main pieces with panel lines and no windows: perfect for my style of airliner modelling! The parts had a lot of flash and excess plastic along the edges, and the main components were lacking in locating pins. While locating pins almost always fail to properly align fuselage halves, they do help to at least start the process and hold various pieces in place. On the other hand, I have done enough type conversions before to be comfortable with cutting and re-gluing fuselage components. My preferred method involves applying strips of styrene behind the joint for reinforcement and alignment, and it seemed that same process would work well on this build. A feature on this build is the availability of a flight deck... I love flight decks! They always provide a convenient place to mount my weights: At issue next was the nose wheel bay. The kit instructions call for installing the nose wheel strut prior to closing the fuselage... No, thank you. Instead I decided, after studying the drawings, that I MIGHT be able to get away with simply cutting a notch in the wheel bay and installing the struts later. I don't actually know if this is going to work, but it has worked before and I see no reason why it shouldn't work here. I will let you know once I try it, of course. Also worth noting is that the locating holes for the horizontal stabilizers are covered over... I opened these up prior to closing the fuselage. From here, then, a final dry-fit before taking the plunge and closing the fuselage... One can see that the roof already has very good alignment, so I did not expect any particular difficulties. Having said that, though, I was not surprised to see this misalignment pop up where four of the fuselage parts meet... There are a number of curves on the fuselage that exert force on this particular area of the model, so extra care will be required to get the pieces properly aligned. In my case, I applied solvent glue and then pushed one side, pulled the other side, and squeezed both sides. The resulting joint was, I think, good enough. The bottom of that same area, though, is a tragedy! On the other hand, this area of the fuselage tends to present a problem, for me at least, on most of the airliners I build. The solution is a simple matter of applying elbow grease and reshaping these curves... No worries. Also worth noting is that the cockpit glass is every-so-slightly smaller than the opening in the fuselage, and so pressing the clear plastic down into the slot results in a step along the roof line. Instead, I glued the cockpit part in at its front, aligning it with the nose, and then glued the part at its roof line. This process, I believe, properly aligns the piece along the roof but leaves a small gap at its base. Again, no worries. Filling the base will be significantly easier than reshaping the roof line. And this is where she sits so far! I've heard a lot of moaning and groaning about the quality of this kit, but I am excited to hit it with full-steam. None of the issues I have encountered to this point are particularly unreasonable, in my opinion, and none of the issues that I see coming have concerned me yet. What problems have I not foreseen, though? I guess we'll find out! In the meantime, I have, for the first time in 11 years, an MD-11 fuselage sitting on my table... and we're just getting to the good part! I will work next on the wings and stabilizers, and then will progress to the engines... Until then, comments are welcomed... Thanks for looking!
  4. Friends, just wanted to show some pictures of my latest build. This is the Zvezda 737-800, which is an AMAZING kit, with the old Revell kit decals. I performed this build, first, to familiarize myself with the Zvezda kit and, second, to practice some new painting and gloss finishing techniques. The decals didn't fit quite properly, but the build was going so well, in my humble opinion, that I just had to finish it! As always, thanks for letting me share! D-AHFM, TUIfly Haribo GoldbAIR:
  5. Bombardier CRJ-100 1:144 BPK (Big Planes Kits) The Bombardier CRJ (Canadair Regional Jet) is a a highly successful small airliner which started life as a development of the Canadair Challenger, and has been developed and stretched from the -100 series to the -1000 series. Entering service in 1992 the 50 seat CRJ-100 was soon developed into the CRJ-200 with more efficient engines, and sold widely to many airlines around the world, with a total of 1,021 of both models being delivered. The stretched CRJ-700/900/1000 series is still in production, with over 600 having been delivered. CRJ's can be seen at virtually any major airport around the world, and are likely to be in service for many more years. The Kit BPK from Ukraine is a relatively new manufacturer who started off producing a lovely 1:72 Boeing 737. They have now branched into 1:144 scale and chosen the CRJ-100 as their first model. This is a good choice as it is such widely used aeroplane, and no doubt the aftermarket decal manufacturers will be along soon with many of the liveries worn by this aircraft. (The CRJ-100 is due to be released in 1:72 scale soon, as noted on the side of the box). The kit comes in a neat top opening box, with a side profile drawing of one of the 3 options contained within. Inside there are 3 grey plastic sprues of components, 1 clear, 1 photo etch fret, resin engine parts, a sheet of window masks, and a decal sheet. A pretty comprehensive kit of parts. The first thing to notice is that model has a complete flight deck, with pilots seats, instrument panel, centre console, and rear bulkhead. Decals are supplied for the panel and console, and even for the rear bulkhead. This assembly fits into a separate nose moulding, which itself is in clear plastic, which is then fitted to the main fuselage sections. This is a great idea, as it should create an excellent blended in windscreen with minimum effort, particularly as pre-cut windscreen masks are supplied. Also unusual is the treatment of the cabin windows. The fuselage has recess running along it, into which you fit a clear plastic strip each side. Window masks are the placed over these, and removed after painting to reveal the cabin windows. You could either cut out part of the recess leaving a lip around its edge for the clear strip, or paint it black before fitting the clear part. Either way, it should create nice flush windows and I am keen to get on with the build and see how it goes. The engines are made from injection moulded upper and lower halves and pylon, with resin exhaust cones and intakes. Having the intake and fan detail as a single piece like this is by far the best way of doing it, as there is no awkward join inside to clean up. The rest of the construction is conventional, with a 1 piece lower wing with 2 uppers, and a main gear bay. The 'T' tail and undercarriage complete the model. Apparentlt there is a flaw on the injection moulded fin, so a resin replacement is provided. All the mouldings are nicely done, with fine detail and minimum flash. Panel lines are very lightly engraved, and the trailing edges of the wings and tailplanes are lovely and thin. Decals are provided for 3 liveries. 1) is the early 'Delta Connection' Comair cheatline scheme, 2) is the later plain white Delta Connection scheme with a blue underside, and 3) is the overall white Air France scheme. The decal sheet is silk screen printed with good colours and in perfect register. All the edges and lettering are crisp and sharp. A large range of tiny little stencils are supplied, along with a choice of several registrations for all 3 options. Conclusion. This is an impressive new release for BPK's first entry into 1/144 scale. The attention to detail is excellent, with the use of photo etch and resin where appropriate, and the decal sheet covers every last detail that will be found on the external airframe. I really like the innovative way of doing the cockpit and cabin glazing, it should give a very good result. It is a very well thought out, high quality, complete package (do you know of any other injection moulded airliner kit that comes with etched windscreen wipers!). So impressed am I, that this kit is going straight on to my workbench today and will shortly feature in the 'Work in Progress' section. [Edit] WIP thread is now here. [/Edit] [Edit] Finished model is here [/Edit] Finally, I hope that BPK consider doing some more 1:144 airliners, top of my personal wish list would be a Q400 (in FlyBe colours please!) which would make the perfect companion to this one. Highly recommended Review sample courtesy of
  6. BAC 111-207 British Eagle 1:144 Airfix with Classic-airlines.com decals I picked up this vintage Airfix BAC 111 at this years Cosford show for £10, in the British Caledonian boxing. Finding this decal sheet at www.classic-airlines.com I just had to have it, and started building immediately. The kit isn't bad but requires a few basic corrections as it was based on the early prototype, and the first production examples that went into service with British United. The nose is too blunt, so was built up with Milliput and given a more pointed shape. The wing fences aligned with the outer flap track need removing, and new ones installed further inboard. The leading edge landing lights need to be filled in, I rescribed the wings as well. An APU exhaust needs to be installed at the base of the rudder. Refined the shape of the rear cowlings, blending in the 'ring' exhaust to a smoother shape. Careful masking was needed to get a thin white line under the 'cheat line' and the decals needed care in application, but worked beautifully. I really enjoy building these vintage Airfix airliners, especially when I can put them into long gone liveries that I remember from my childhood. Ok, they are not to the standard of the stunning Authentic Airliners resin kits, but are still very enjoyable! And finally... with the F-Rsin Bristol Britannia; Thanks for looking, John
  7. Airfix BAC 1-11 500ED. Two-Six British Airways 'Landor' decals. Ok, so if you want a beautiful, accurate 1-11 500 then you need to get hold of the Authentic Airliners resin kit. But I got this out of the stash and thought I'd have a bit of fun improving it and converting it from a short bodied 200 series 1-11 into the stretched 500 series. I've thouroghly enjoyed it from start ti finish, and have a second 500 under construction as well now. Lots of work with sheet plasticard undertaken, full build log Here The main changes were extended fuselage, extended wingtips, new wing fences & flap tracks, engine pylons, engine hushkits, and a reshaped nose. The decals from Two-Six were superb and a delight to use. A plus is that the sheet covers all BA Landor 1-11's incluing the short bodied 200's, so if you don't want to do all the extending work, you can just do the wing fences, flap tracks, and nose. I chose to do G-AVMO which was preserved at Cosford for many years and is now at east Fortune in Scotland, very fitting really as it was named 'Lothian Region'. Enough words, here is the completed conversion. And 'with something else' - another 1-11 500, this one a Welsh Models Vac with Two-Six BEA decals. Thanks for looking. On with the second conversion now, which will be in BEA Red Square finish, to show the BEA/BA 1-11 500 in its first and last schemes. John
  8. Fokker F.27, Air Anglia Welsh Models 1:144 Vacform The F.27 was Fokkers very successful entry to the twin turboprop regional airliner market, first flying in 1955. Very few remain in service,, but it had a long and varied career with a wide range of operators The Welsh Models vacform is one of my favourite kits, this one being my third to be completed. The Air Angliadecals come with the kit and are designed & produced by Twosix decals and performed beautifully. There is no white printing on them so the 'Air Anglia' titles are clear printed in the black area. The bottom of the fuselage then needs painting in black. I scratch built my own props from sprue runners for the spinners and 10 thou sheet for the props. And finally 'with something else', more F.27's! Thanks for looking, John
  9. Airspeed AS57 Ambassador 1:144 Welsh Models I've always wanted an Ambassador in my airliner collection, it is such a gracefull looking aitcraft. It is harldly likely to ever be issued as an injection moulded kit, so thank goodness Welsh Models have provided a vac-form kit. It is a fair bit of work to cut out and prepare all parts, but it goes together quite well. This one has been on the bench for over 2 years now, mainly because I dithered about what scheme to finish it in. I really wanted to do it in the early BEA scheme but could not track down a decal sheet, and Densil at Welsh Models had sold out. Earlier this year I revived it and got on with painting it in the Dan Air scheme the kit provided decals for, although these are mainly just the titles, logos amd registrations. All the cheat lines you have to paint yourself. The paint job required before you can start decalling; 'With something else' - a double this time!. It goes well with the Welsh Models HS.748 Budgie; And I couldn't resist parking these 2 together, for 1 obvious reason; Thanks for looking, John
  10. Revell 1:144 Airbus A320. 26 Decals 'British Caledonian'. This is the venerable Revell kit from the 'Eidelweiss' boxing, finished with 26 Decals laser printed British Caledonian Decals.I was motivated to do it when I ordered my BCAL Viscount decals from Ray, and saw this also on his website. The A320 almost made it into service wearing this livery and was undergoing flight testing in it. Unfortunately BCAL were taken over by British Airways before it was delivered, so was repainted in the BA livery before it left the factory. A sort of 'What if' that actually happened. Story here. They were early 100 series A320's that didn't have the wingtip fences, or the strakes on the engine cowlings. British Airways were so impressed with them that they broke from their dominant ordering of Boeing 737's and purchased their own fleet of A319, A320, and A321 aircraft, many of which are still in service. With something else. It had to be the Viscount that started this BCAL theme off. One tip when using laser printed decals is that they often do not contain any white printing. This scheme requires a fine white line under the yellow part of the cheatline. Rather than try and mask & paint it before decal application, I photocopied the decal sheet. Then I Placed the copy over some solid white decal sheet and cut along the bottom edge of the yellow cheatline to give me oversized white areas. These went on the model first, then the cheatlines went of top. Both were applied at the same time and could be moved relative to each other. I just eased the white parts into position with the tip of a blunt knife. I only did one side at a time, letting the first one dry completely before doing the other side the next day. only the bottom edge of the white needs to be crisply cut. Thanks for looking, John
  11. Friends, My name is Andrew and I, obviously, am a new member on this site. This being my first post, please allow me to briefly self-introduce. I'm from the States, currently located in Los Angeles, CA, and have been building models intermittently for the past 20-ish years. I used to build airliners regularly about 10 years ago, but have not built any models in the past two years. I recently answered the call to build some airliners again, and so here we are! The reason I joined this site, among other things, is because a lot of the references and resources I came across in my return to modelling led me here. I have found an incredible amount of new information on this site, along with some amazing model builds, airliners and otherwise. In short, my current modelling psyche has been heavily influenced by the members here, so I hope to make my own small returns. Enough babbling! The present model is the historic Revell 737-800, cut down to the length of a -700. The last time I built one of these I used resin engine and winglet replacements, but this time I wanted to build the airliner without aftermarket pieces. As such, I modified and reshaped the winglets with sheet styrene, a-la Viking's sticky in the Civil Modelling forum, and used styrene tube to create the engine intakes. Panel lines were preserved and/or re-scribed, because I'm one of THOSE guy when it comes to panel lines, and antennas and pokey-things were scratched from brass rod and/or styrene sheet. I'm not 100% content with the build: It has obvious problems that I'm happy to acknowledge, but it feels good to build an airliner, learn some new techniques, and actually finish my first model in years. And my apologies for the picture quality: My cell phone has seen better days, and my girlfriend took my lightbox for some project she's working on... PH-BGO, KLM Royal Dutch Airlines:
  12. Friends, After hitting a rough patch with my 777 I wanted to hammer out a quick build to get some mojo back and try out a few new ideas related to paint and finishing. I have a dozen or so 1/200 Hasegawa kits ready for paint, so I grabbed this 737-800 and a set of appropriate decals. The paint job wasn't much of a challenge, I admit, but I've been wanting to practice polishing my clear coat to get a really deep, smooth gloss finish so it was preferable to keep it simple. Also, I had never used Rib Hobby decals before, but I was very impressed with how well they went on the model... Anyway, I just applied a coat of Future to seal the model, and I will attempt to polish the finish once the clear cures. So, for now, I'm not ready to call it finished... Thanks for taking a look!
  13. S&M Viscount. 1:144 26 Decals 'British Caledonian Commuter'. I have a few of these kits and decided to attempt some simple improvements to it. Mainly, the nose is too blunt, the cockpit 'bulge; a little too 'square' and the trailing edges could do with thinning down as could the props. All is detailed in this Work in Progress thread I also used the Viscount detail set from 26 decals, which provides all the panel lines, intake, etc, and makes a huge difference to the model. It is essential if you are building one of these. I think the British Caledonian livery is one of the all time best ever carried by an airline, really classy. They only had 1 Viscount, which was operated on their behalf by British Air Ferreies, and did not last long in this scheme before it was modified and lost that lovely Scottish lion on the fin. With something else. A Welsh Models vac form Viscount in BEA Red square. Thanks for looking John
  14. Friends, I'm planning to make some headway on my Revell 777-300ER. I had started this kit months ago, but it sat shelved due to work and life priorities. I am also working on a Zvezda 767-300, and learned by working on that model that I absolutely will never again use the clear plastic styrene window pieces unless I'm trying to have the windows open. To that end I cracked open the 777, which I had already closed, and ripped out the clear styrene to be replaced with apoxie sculpt. Having left the apoxie to cure overnight, the plan this morning is to re-seal the fuselage and get it ready for primer. The ultimate objective on this one is B-KPL, a Cathay Pacific 777-300ER in the OneWorld scheme, and I hope to try a few new tricks that I've learned from the other modellers here. Thanks for taking a look!
  15. Tupolev Tu-134. CSA and Interflug Zvezda 1:144 with Avia Decals The kit is the beautiful Zvezda 134, one of my favourite kits of recent years. It really is a beautifully moulded kit with almost perfect fit, and a pleasure to build. Add to that the fact that is a beautiful looking bird, combining good looks with toughness and it is an all round winner! I already built one with the kit supplied Aeroflot markings, so got hold of Avia Decals sheet from Hannants, with CSA, Interflug, and LOT options. It is slightly pricey, but good value when you consider that you can do 3 models with it. All 3 options have a slightly different window layout to the Aeroflot version, with an extra window on the starboard side at the front, and the small forward window relocated nearer the front. It is pretty simple and Avia explain it all. They even supply a vinyl template that you line up on the existing forward window, and it has holes in to tell you where to drill out the new windows. Simple and very effective, I was very impressed with this set, the decals themselves went on beautifully. Thats a 10 out 10 for Avia from me! On with the photos. First up CSA; Interflug version. Very similair, I know. But I like both, so built both! Both together; And with the glass nosed Aeroflot version, built straight from the box Thanks for looking, John
  16. Boeing 737-200 South African Airways 1:144 Airfix with modifications The third of my modified Airfix 737-200's. The mods are to cut away the cockpit area and replace it with the clear moulded part from a Daco/Skyline 737 kit, and correcting the engines from the 100 series to the 200 Advanced. This involves lengthening them and fattening the pylons. I also added a bit of cockpit detail and a pair of crew figures from N gauge railway passengers, and opened out the wheel bays to make them 3 dimensional. The Airfix kit is old but basically good, and benefits from these few mods. After all this work some top quality decals are required, so it was straight to Draw Decals website where I found this beautiful scheme. SAA had one the best liveries of all time, and their aircraft were usually kept in sparkling condition. Underside showing the opened out wheel bays Crew at work! With something else. No contest. It has to be my other ZS- registered aircraft, the hilarious 737-800 in Kulula livery, also from Draw Decals. Some info about the modifications. Test fit of the cut out for the Daco clear part Modified engines. Lengthened with a 6mm section of a bomb, covered with Milliput. Pylons widened with plastic sheet. Basic parts for improving the model It was all extra work, but well worth the effort. Thanks for looking, John
  17. Douglas DC-3, Trans World Airline. 1:144 Roden. This aircraft needs no introduction! It is the new Roden kit in 1:144 and a lovely little kit it is too. No issues with construction, it fits together beautifully. The decals are a big improvement over previous Roden offerings, but still need to be handled carefully. Finish is Alclad with Citadel silver for the control surfaces. We could do with a few aftermarket decal sheets for this one, I'll certainly build more, it is a great little kit and a huge improvement over the Minicraft offering. It isn't very big at all, with the modellers standard reference point, a jar of Tamiya paint; And finally, the 'with something else' picture. It could only be the Fly Models DC-9-10 with Draw Decals TWA markings. Thanks for looking, John
  18. Airfix 1:144 Boeing 737 TwoSix 'Air Europe' Decals. Airwaves Etched brass galleys Plus my own scratch building Ok, I went a bit mad here and didn't know when to stop. It started out as an attempt to improve the old 1960's Airfix kit of the Boeing 737-200, and just kept going and going as I had more ideas. I already posted what the improvements were in my second attempt but which got finished first. Basically it was; - Replace the cockpit glazing with the part provided in Daco's 737 kits. - Scratchbuild some interior detail for the cockpit, including the flight crew. - Open up the main and nosewheel bays, which are just shallow opening on the kit - Improve the engines. They are too short in the kit, and have the early 'skinny' pylons only applicable to the first 100 or so machines produced. - The passenger cabin windows are just little square shapes. I filed the all top and botton to open them up to oval shape. - I had a etched brass set for the forward integral airstairs, so they were added. - Adding the Airwaves etched brass detail set, which consists of the forward and aft galleys. - Then I decided that a few rows of passenger seats were necessary. - I though a base would be nice, so made one. - As I had opened the luggage bay and fitted a floor, it really needed a loading vehicle to park there. - I has a set of etch brass luggage wagons, but no tug. Both this and the luggage wagon are scratch built, and generic rather than replicas of actual vehicles. - A tow bar on the nose would be nice. So I scratched on up from rod & tube. Must make a tug though! - Finally, it needed some passengers walking out. These are unpainted from Noch, and its taken me weeks to paint them all. The model represents G-DDDV known to its crews not as 'Delta Victor' but as the 'Dirty Vicar'. She followed my father around after he retired from British Airways, and made subsequent comebacks with Air Europe and then Gulf Air. G-DDDV appeared in all 3 liveries. There is a little figure of 'Viking dad' sitting in the left hand seat, just visible through the cockpit. Enough talk, on with the photos; Crew visible in cockpit; The little scratchbuilt vehicles; Improved wheelbays; Some of the interior bits; Thanks are due to member Skodadriver who supplied me with the Daco clear cockpit part and silver frame decal, enabling me to go a bit mad and do this! Cheers John
  19. Roden have released two gorgeous kits of the Vickers Super VC10 in 1/144 scale. This iconic aircraft is available in two different versions, with either the distinctive BOAC livery or East African livery.
  20. Well, it's a new year, so why not a new WIP? I wasn't initially going to do this thread, so I've already made some progress. I started by painting the inside of the fuselage matt black and fitting the clear window parts. Following this the main and nose gear bays and the flightdeck were painted and installed. After joining the fuselage halves, I fitted the belly plate and the wings. The fit has been very good so far - only two small patches of filler have been needed. A350 by Caution Wake Turbulence, on Flickr The windscreen is very slightly under-sized, but after painting the edge with black paint, I able to make a good join using some microscale crystal clear. I cut the mask using the windscreen from a second kit. A350 Nose by Caution Wake Turbulence, on Flickr I've masked the cabin windows with Microscale Micro Mask, applied using a short length of 0.5mm styrene rod mounted in my pin vice, which seemed to work better than a cocktail stick. A350 Windows by Caution Wake Turbulence, on Flickr It's a bit of a pain having to fit the nose gear at the beginning, but it hasn't broken off.....yet! With some thought, you could probably modify it to fit at the end. A350 Nose Gear by Caution Wake Turbulence, on Flickr It took a little bit of fettling to match the curvature of the fuselage and the belly plate, but with a little sanding and some rescribing, I'm quite pleased with the result. A350 Belly by Caution Wake Turbulence, on Flickr I decided to add a little detail to the main gear.... A350 Main Gear by Caution Wake Turbulence, on Flickr I've been experimenting with various shades of Alclad on the engines.... More or less successfully. There are a couple of sink marks on the engine cowling to be filled. A350 Engine by Caution Wake Turbulence, on Flickr I'm reasonably pleased with the engine fans, although the blade spacing is a bit uneven. Trent XWB Fan by Caution Wake Turbulence, on Flickr As ever, Revell's painting instructions seem to have only a loose relationship with reality... I have to say, despite some people's misgivings, the A350 is really growing on me! Thinking about doing a second in Virgin colours if my A330 decals will fit. More as small people permit..... Happy New Year, Andrew
  21. TWA Delivery Colors DC-9-14/15 1:144 Draw Decal The DC-9 series of airliners have enjoyed a long and sucessful career over the decades since the first examples entered service in the mid 1960's. They have served with a multitude of airlines, and the original short fuselage series 10 was developed through series 20, 30, 40, and 50 variants with increasing size fuselage, though the 20 kept the 10's short fuselage and utilised the 30's longer wing. Further development led to the MD-80 series with even longer fuselages and a new larger wing and engines. TWA were amomgst the first operators, and took delivery of their original series 10's in 1966 in the rocket striped 'Twin Globes' livery. Draw Decal have this scheme in their 'Digital Silk' range in 1:200, 1:144, and 1:120 scales. The sheet provides for all variations in the livery, with grey or black door outlines, bare metal or white cockpit framing, 'Douglas DC-9' or 'Starstream' logos for the engines, and fleet numbers to cover the entire fleet. All is detailed in the instructions. The Rocket Stripe is printed as a complete unit and will need to be trimmed to allow for the rear engine pylons. This is sensible as the base kit most of will use will either be the Fly models version, or a cut down Airfix kit. It is a simple matter to photocopy the sheet and cut out the stripes, then tape them in place on the fuselage. Using a cocktail stick the photocopy can be creased to go around the pylon, and the removed and cut along the crease line. Test fitting will ensure it is correct, then the copy can be placed over the decal and used as a template to remove the pylon cut out. This procdure is often useful with a lot of aftermarket decal sets, and is simpler to do than to explain. It is important to follow Draw's instructions. The constant carrier film requires that you need cut around each decal individually.It can then be dipped in hot water, and applied to the model as normal. After allowing 10 - 20 minutes for the decal to grip, a cloth dipped in hot water can be pressed over it to blend it in to the surface. I used a sheet of kitchen paper folded over many times, dipped in hot water from the kettle, being careful not to burn my fingers. The decals will the conform to any curvatures, and stick like limpets to the surface. As with all types of decals, a coat of Kleer/Future will seal them in. Conclusion. Another lovely set from Draw Decals, that creates a really attractive model. Some of the best liveries were around in the 1960's and 70's and it is great to be able to model them. I had no trouble applying these to my Fly Models DC-9, but you must apply them a few at a time and let them settle, and use the hot cloth treatment. More photos in 'Ready for Inspection' Highly recommended. Review sample courtesy of
  22. Douglas DC-4 Transworld Airline (TWA) 1:144 Minicraft with Draw Decals The DC-4 is one of my favourite aircraft, it did sterling work in the post war period and a few are still working today, such as those with Buffalo Airways in Canada. The Minicraft kit is a real beauty, one of their best, although it is getting hard to find now. Decals are from Draw Decals and went on beautifully, as usual. The paintwork is Alclad 'polished aluminium' on the fuselage and cowlings, with the wings & tailplanes in Citadel Runefang steel. And 'with something else'. Well 2 really as I seem to be developing a TWA theme. Rodens DC-3 straight from the box with TWA markings; And Fly's DC-9 with Draw Decals TWA set; Thanks for looking John
  23. Bombardier CRJ-200 - 1:144 BPK Air Canada Jazz This kit was released earlier this year and Reviewed here It followed on from their earlier kit of the CRJ-100 This build has been almost finished for a couple of months now, but work commitments have been keeping me from my bench more than I would like. I finally got the finishing touches of photo etch on this week. These are lovely little kits with an innovative solution for the glazing. The nose section is moulded in clear and the side windows are clear strips with masks provided for the windows. On this release the 'Jazz' titles and maple leaf on the tail are also masks, allowing you to do the red or green versions. The tail logos are supplemented with decal 'leaf veins' for detailing. I am extremely impressed with them. They needed care applying to the fuselage, but look absolutely brilliant once done. It gives that 'painted on look' becasue they are! Enough words, on with the photos; And 'With something else' its brother the dash 100 in 'Delta Connection; A little extra to show the fuselage & tail masks in process; Now we have the 1:72 vesrion also. This has the 'Jazz' stencils as well. I'll be doing the green version this time. Thanks for looking John
  24. Lockheed Super Constellation Trans Canada Airlines. 1:144 Minicraft Surely the most graceful of airliners, the Lockheed Constellation is in my top 3 all time favourites.It wore many and varied schemes over its long service, but the TCA one is just about the most attractive. I have a family connection also, as my father flew these in his first airline job after leaving the RCAF. The kit is from Minicraft, and is a trouble free, if a little fiddly, build. The decals are from CanMilAir printed in 2 little sets. I was slightly wary of the 3 part cheatline, but it all worked beautifully and I was suitably impressed. The only thing I altered was the silver cabin (passenger) windows, which I overlayed with some clear decal sheet sprayed with Tamiya 'Smoke' to darken them a little. And a slightly unusual 'with something else' - An actual TCA Miniature of Canadian Club whiskey liberated from the galley of a TCA Connie all those years ago, still with us and holding its contents! Family heirloom I call it Thanks for looking, John
  25. BAC 1-1 200 Converted to 1-11 510ED I've been rather busy with the day job taking me away from home for long stertches of time this year, which has affected my modelling time. I've not been able to use my workbench, compressor/airbrush much, so found myself looking for something to make with minimal tools paints etc. I came up with this, the old Airfix 1-11 which has been around for forty odd years, and figured I could do some cutting and gluing to improve and convert it. It has a few problems, the main ones being that the nose is too blunt (correct for the very earliest 1-11's though) ourboard wing fences needing deleting and moving inboard, wing landing lights deleting, and flap track fairings need lengthening and altering to 'canoe' type. To make it more interesting I decided to stretch the fuselage to a 500 series aircraft, with extended wingtips. And then I realised I'd need to 'hushkit' the engines. Interestingly, I have an original issue of the kit, and the most recent boxing hasn't half seen the box size grow! Decals will be for the final 'Landor' scheme the BA 1-11's wore before retirement. Not wanting to cut up 2 1-11 kits for the fuselage extensions, I rolled some 20 thou plasticard into half rounds, sawed the fuselage halves fore and aft of the wing, and on a flat surface glued the extesnsions to the insides of 1 fuselage half. Thats 18.1 mm forward and 10.5 mm aft. When that was set the next day, I did the other side, matching it to the one already done. and putting it on a flat surface to set. This left a big recess to fill in and build out the fuselage side. More rolled plasticard (curved around my x-acto knife handle) filled in the recesses, with quarter sections. one on top and one on the bottom, then the side. White milliput was slathered on and left to set. A fair bit of sanding followed to flush the extensions in with the rest of the fuselage. I didn't take any photos unfortunately. I cut a vertical slot in the nose and glued in a rough profile of the new more pointed nose shape, build up around it with milliput, and sanded it all to shape. It;s a huge improvement over the blunt kit shape. The glazing fitted nicely so I will leave it clear. It was sanded to belend it in and polished back to clarity with micromessh. The wings received attention next, with new tips cut roughlt to shape, glued on and then sanded down to shape. The flap track fairings wer cut off, and I sawed slots into the wings for new plasticard ones. Likewise the outer wing dences were removed, a stlot marked out with an olfa p-cutter where the new ones went, and new fences glued in. They were approximately shaped first and the sanded down to proper size one firlmy set. The engines needed some thought. The 'Hushkits' are a long extension on the rear. I found some bombs that had the right cross section to do the job, and cut them to size. I didn't like the engine mounts as they have half on the fuselage and half on the engine cowling making for a pig of a job to eliminate the seam down the middle. So I made new ones from plasticard, and sliced the kit items off. Engine pylons are on now. I'll have to figure out how to do the 'crinkled' exhausts on the hushkits now. Wings, tail and engines can then go on, and priming can commence. Thanks for looking John
×
×
  • Create New...