Valleyofvallejo

Fuselage being glued together: Some filler needed for the headrest: Cockpit shots: Some sink marks were in main landing gear legs. Putty to the rescue! Messed up on the oil coolers. More filling to be done: Wheel well shots. Some areas need touching up with paint. Superglued some copper wire for ignition leads: The wires have been cut to size & shape:

I have read the instructions & looked at the parts of the landing gear doors. There doesn't seem to be a way to build it gear up OOB without modifying the parts (at least for the tail gear doors). Correct me if I'm wrong.

Looks brilliant! Especially from a youngster.

Brilliant work!

Excellent build of my favourite WW2 aircraft (probably my all time favourite)!

Now visible. Swapped from photobucket to imgur

Hi everyone! I'm currently building a 1/72 Corsair by Tamiya & applying all paint with the hairy stick. Will be doing my -1D in the tri colour scheme like above. Tailplanes joined onto both halves Interior painted interior green (Vallejo 'Flat Yellow' & 'Flat Green' in a 2:1 ratio) & sidewall detail painted black. Seat & rear bulkhead painted Rudder pedals have been drybrushed with aluminium paint to simulate chipping. Cockpit side & instrument panels have been glued together & painted. The reason the control stick looks wonky is because I accidentally snapped the thin rear section & accidentally cut off the handle in my rushed attempt to get it off. Glued them both back on fortunately. Gunsight painted Everything would receive a few more coats of paint & some weathering before they can be called done. The instrument panel & sidewall detail would get picked out before assembly [obviously].

I'm asking for model color, not model air.

I have a Tamiya 1/72 F4U-1d & I need to convert the colours from Tamiya to Vallejo Model Color. Here are the paints listed in the instructions: AS-8 X-3 X-4 X-5 X-6 X-7 X-10 X-11 X-18 XF-1 XF-3 XF-5 XF-16 XF-19 XF-58 What colours do these correspond to in Vallejo Model Colour paints? Which paints re neccesary & which arent?

Man, I'm really stuck between chosing these two kits for one of my next builds. I would like to build the AMK Kfir (cause I'm a huge Mirage fan), but I'm not so sure as to whether it's a good choice because I'm a beginner & haven't completed the kit I'm currently working on. OTOH, the Academy F-4J is more beginner friendly, but also costs more (22 AUD for the AMK vs 32 AUD (sale price) for the Academy). I also would be building an Eduard MK.VIII Spitfire for christmas & it should mean that I wouldn't really need to buy much paint for it if I select the Kfir (due to similar camo schemes). Does either kit have better fit than the other? I'm specifically looking for an easy & quick build.

It's this:

Does water work as an effective thinner?

AFAIK, the difference is that the polyurethane varnish is more durable & dries quicker. But can the polyurethane varnish be thinned with water or acrylic thinners? Does it yellow or brush well?

Sydney, AUS.

Any hobby stored within my access don't carry Xtracrylix varnish or paint.

Would Vallejo gloss/matt work better for decal base, or as a finishing coat?

I was also asking which one is the more effective setting solution, Micro Set or Mr Mark Setter?

Which setting solution do you think works better (I'm intending on getting some)? Also, has anyone used a combination of Mr Mark Setter & Micro Sol? If so, tell me how it worked.

All right, which is better for the brush, Humbrol clear or Vallejo gloss? Note that Pledge/Klear isn't available in Australia (Where I live).

Is liquitex gloss varnish any good? Also, is the polyurethane vallejo varnish still good for handbrushing?

There's also the microscale gloss varnish, how is that for handbrushing?

How about the MIG ammo gloss varnish?

Is the aqua gloss good for handbrushing?

I would like to obtain a good acrylic gloss varnish that can be applied with a brush to avoid stinking out the place.

Based on what reason?